Only show results in Virginia? Ok

well monitoring system Applications

  • Monitoring Well Inspection With 3/4-inch Video Camera

    Allegheny Instrument's Nano downhole camera is used to visually inspect groundwater monitoring wells from 1-inch diameter and larger to depths of 1,000 feet with the Heavy Duty hand reel system and depths of 2,000 feet with the Deluxe motorized winch.

    By Allegheny Instruments, Inc. based in Monterey, VIRGINIA (USA).

  • Video Inspection of Monitoring Wells

    GeoVISION borehole video camera systems are used to visually inspect monitoring wells.

    By Allegheny Instruments, Inc. based in Monterey, VIRGINIA (USA).

  • Premium

    Air quality and industrial gas monitoring systems for Semiconductor

    Production of semiconductor materials require extremely clean air supply that help ensure the quality of the materials being manufactured as well as specialized gases to enable production to occur smoothly and efficiently. Teledyne API carries a complete line of Industrial gas process instruments including those that both produce and measure gases in these unique applications. Teledyne API also provides specialty gas instruments designed to help reduce or eliminate Airborne Molecular Contamination (AMC) in the...

    By Teledyne API based in San Diego, CALIFORNIA (USA).

  • Premium

    Validation of Salt Water Disposal Well Treatment Plants with Handheld Oil in Water Sample Analyzer

    Ideally, a continuous online monitor would be used for collecting data to determine upset frequencies, duration and normal conditions. Many of the SWD facilities and demonstration plants do not have a budget that allows for continuous monitoring. However, high frequency sample analysis can be performed on site, using a portable analyzer. Easy to use, low cost field analyzers, such as the TD-500D, are essential for optimizing the effectiveness of treatment systems during pilot studies and meeting a budget that...

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Pipeline Monitoring Systems for Health Monitoring

    Pipeline management presents challenges that are quite unique. Their long length, high value, high risk and often difficult access conditions require continuous monitoring as well as an optimization of maintenance interventions. The main concern for pipeline owners comes from possible leakages that can have a severe impact on the environment and put the pipeline out of service for repair. Leakages can have different causes, including excessive deformations caused by earthquakes, landslides or collisions mobile...

    By Roctest - part of Nova Metrix LLC based in Saint-Lambert, QUEBEC (CANADA).

  • Premium

    Air quality and industrial gas monitoring systems for Ambient air monitoring

    Ambient air quality monitoring is the systematic, long-term assessment of pollutant levels by measuring the concentration and types of certain pollutants in the surrounding, outdoor air. Some of these pollutants (commonly called ‘Criteria Pollutants’) are considered hazardous to human health and their levels are regulated by government agencies around the world, including the US EPA. Teledyne API provides a complete line of ambient air quality monitoring instruments, including those for both gas and...

    By Teledyne API based in San Diego, CALIFORNIA (USA).

  • Environmental Monitoring

    Environmental monitoring is becoming more important every day in local, national and international policies, showing the environmental awareness demanded by society. This fact gives rise to an increase in the amount of legislation that obliges companies to law enforcement. Thus, the necessity of making more pollutants controls means high analysis expenses to the companies, which need to subcontract this service. Although applications in this area advance, there is still a clear demand to get new portable and...

    By MicruX Technologies based in Oviedo, SPAIN.

  • Dust monitoring and Sand Storm Monitoring

    The frequency and intensity of dust and sand storms in many parts of the world are steadily increasing due to droughts and climate change. The severity of such storms is anticipated to increase over the coming years. These dust storms may last hours or days and cause huge damage and imposed a heavy toll on society with its physical effects, such as visibility reduction, heavy winds, red sky, hailstone and severe lightning. Such Dust storms, have a negative impact on human health, and industrial products and...

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Premium

    Gas monitoring instruments and systems for process NOx measurement

    Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen...

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Inventory Monitor for Remote Inventory Monitoring

    Based on the wireless Level Radar SenZ2 provides a complete solution for remote monitoring of tanks, silo’s and especially also for small to mid-sized packaging systems like drums and IBC’s. If you want to make effective decisions, the availability of high-quality online and real-time data is key. Accurate fill-level data will support transparent decision-making, an increase in productivity and a reduction in logistics and storage costs.The wireless level radar can monitor solids as well as fluids in...

    By SenZ2 BV based in NETHERLANDS.

  • Premium

    Air quality monitoring system for traffic control

    Modern intelligent traffic systems are designed to move traffic in an efficient manner as well as reduce the environmental impact of traffic on nearby populations. This includes the effects of noise, particle pollution and gases.

    By AQMesh based in Stratford-upon-Avon, UNITED KINGDOM.

  • Dams and Dikes Structural Health Monitoring Systems

    The control of a dam requires a wide range of important information coming from the sensors, which are of vital importance for the life of a dam. Engineers in charge can take specific and sudden decisions for a correct control of a dam`s reservoir, body and foundations. However, monitoring is not only carried out by sensors, but it also involves direct or remote visual inspection as well as topographical measuring.

    By Roctest - part of Nova Metrix LLC based in Saint-Lambert, QUEBEC (CANADA).

  • Automated System for High Throughput PCR Setup

    Modern genomics labs are looking for high-throughput, quality-data workstations to perform PCR reactions at a reduced cost. PCR reaction setup is a tedious and time consuming process as it requires mixing multiple reagents in specific ratios to achieve the proper master mix for amplification. Moreover, the exact volumes of the reagents and buffers depend upon the total number of samples to be amplified and the desired final concentration of sample DNA. Automation of such procedures eliminates both human error and...

    By Aurora Biomed Inc. based in Vancouver, BRITISH COLUMBIA (CANADA).

  • Water quality monitoring systems for wastewater & effluents monitoring industry

    Instruments for monitoring the aeration-process, nitrification and de-nitrification; chlorination and de-chlorination; as well as the final discharge into the environment.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Premium

    Emissions Monitoring for Mining / Emissions Monitoring for Smelting

    The Opsis monitoring solution for mining and smelting applications is based on either DOAS or laser diode technique. Opsis non-contact monitoring solutions are very well suited for applications in the Mining and Smelting Industries, as the flue gas conditions often involves high temperatures and high dust concentrations. The on-line, open-path systems are used for monitoring HF, sulphur dioxide, SO3 and HCl in potrooms, in fence-line applications and in continuous emissions monitoring.

    By Opsis AB based in Furulund, SWEDEN.

  • Real-time In-situ Effluent Monitoring

    The UviLux BOD Indicator enables in-situ, real-time, reporting of BOD within both natural water systems and water processing plants. The monitor detects fluorescent proteins that are inherent within sewage and slurry and provides an output in BOD equivalent units. The principle behind the measurement is the excitation of Tryptophan-like fluorescence within UV wavelength band, which has been shown to correlate with both BOD and bacterial contamination. With complete flexibility of deployment methodology, the...

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Ammonit Wind Farm Monitoring Systems (SCADA)

    Once the wind farm is set up and running, its best performance has to be ensured. To do so, it is essential to monitor and check its operation. Meteo-40 can easily be integrated in SCADA (Supervisory Control and Data Acquisition) systems to provide reliable comparative meteorological data. Considering the measurement data recorded by Meteo-40, for example, predictions about the annual energy production of the wind farm can be verified. Meteo-40 records measurement data, which is used by wind farm operators and...

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Weather Monitoring Systems for industrial and utility sector

    The weather can have a major impact on many industrial processes and operations, both from an operational efficiency and/or safety standpoint. For example, real-time information about ambient atmospheric conditions provides the necessary input data required to make the proper decisions during an industrial emergency involving any type of hazardous material. Depending on the plant type, size and age, the federal Environmental Protection Agency (EPA), as well as municipal and state environmental regulatory organizati...

    By Climatronics Corporation based in Bohemia, NEW YORK (USA).

  • Premium

    Water monitoring equipment for Aquifer characterization industry

    In-Situ’s Virtual HERMIT Aquifer Testing Kit lets you monitor an entire well field with one system. Simultaneously configure, start, view, step, or stop all connected data loggers, or set up equipment to run tests at a pre-set time. Aquifer testing has never been so easy, simplifying data collection even at remote sites. Plus, In-Situ’s professional-grade water level monitoring loggers ensure you get the most accurate data possible.

    By In-Situ, Inc. based in Fort Collins, COLORADO (USA).

  • Oil in Water Monitoring

    Detection of hydrocarbons within both water sources and effluent intake to Waste Water Treatment Works is an increasing requirement. The UviLux Hydrocarbon fluorometer detects hydrocarbons in water at very low concentrations. This in-situ fluorometer provides a rugged sensor which can be deployed in a wide variety of configurations. The UviLux is part of the Lux range of CTG fluorometers, and can be provided with a number of options with regard to signal protocols, and has available accessories to enable...

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you