Only show results in Virginia? Ok

well water contamination Applications

  • Water Contamination Detection

    Security of water assets is becoming an increasingly major issue that demands immediate and robust alarms for potential contamination. In addition to this, natural growth of algae is a common problem for water asset managers, the results of which can increase maintenance costs of water processing plants as well as directly effecting water taste. The CTG FastGuard fast repetition rate fluorometer analyses information on the physiological state of the algae it monitors within an in-line flow system. A number of key parameters are monitored and analysed by the on-board embedded software, which instantly initiates both an audible and visual alarm on detection of a contaminant within the water system. The FastGuard is a robust low maintenance system which avoids false positives often provided by other contamination detection systems.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Filtration systems & solutions for wastewater treatment industry

    The removal of contaminants from untreated water has become a leading issue, due to environmental concerns and the threat of future water shortage. An effective purification process is necessary to eliminate organic, chemical or other debris to meet stringent regulations for drinking water, as well as for the chemical, industrial, pharmaceutical and science markets.

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.

  • Aquatech Enhanced Oil Recovery (EOR)

    In a Steamflood Enhanced Oil Recovery (EOR) process, steam is injected in the well, lowering the viscosity of heavy oil suitable for extraction through the production wells. The fluid from the wells is a mixture of oil, water and gas and goes through a separation system to separate the three. The separated produced water is heavily contaminated with dissolved solids and hydrocarbons. Aquatech’s Steamflood Enhanced Oil Recovery (EOR) Technology offers the integrated solutions for the treatment EOR produced water for boilers, generating a purified product that can be reused for the production and injection of steam. Our turnkey approach to treatment includes coordinating the logistics of wastewater removal off-site and any sludge disposal.

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

  • Premium

    Oil in Water Analysis for Flowback or Produced Water

    The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water. Waiting for remote lab results can take several days to a week. InfraCal TOG/TPH Analyzers allow for oil in water testing at the well site in less than 10 minutes. The sampling requires a few simple steps that can be performed by non-technical personnel. The water is mixed with the extraction solvent, shaken, and then presented to the analyze for measurement. The same InfraCal TOG/TPH Analyzer can be used for TPH in soil if a spill or pond leak occurs to determine the contaminated area. The analyzer features: -Results in under 15 minutes -Detect levels as low as 10 ppm -Portable, rugged, lightweight, easy-to-use -Battery operable -Ideal for field or lab use

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Cooling Towers and Process Water System Cleaning Applications Using Hydrogen Peroxide

    The unique properties of hydrogen peroxide (H2O2) make it a good technology for keeping cooling loops, process water loops and heat exchangers clean from fouling that can occur due to various contaminants in the water. Hydrogen peroxide works well in removing organic fouling on surfaces through mechanical means and in specific applications through biocidal mechanisms. Hydrogen peroxide can be used in a shock treatment mode where it is fed based on a timer set-up. It can also be used occasionally at higher concentrations for maintenance cleaning purposes of fouled heat exchangers, cooling water loops and process water loops. Performing an occasional shock cleaning of a heat exchanger with hydrogen peroxide can remove buildup from surfaces and can result in improved heat transfer efficiency. By removing surface fouling, hydrogen peroxide may also improve the efficiency of other biocides such as bleach, bromine and non-oxidizers.

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Plating rinse wastewater solution

    Plating rinse wastewater is one of the most common applications for ENCON Wastewater Evaporators. Wastewater from plating rinse tends to be rather corrosive. The chemistries used in the plating process can include a wide range of acids such as nitric acid, chromic acid, hydrochloric acid, sulfuric acid, hydrofluoric acid, as well as other non-acid chemistries like ammonium bifluoride and nickel sulfamate. Typically, the waste stream has a transparent, relatively clean look because they are dilute and the contaminants are in solution.

    By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

  • Premium

    Ultraviolet Disinfection for Process Water

    Water is often used as a product, or as part of the manufacturing process. In many industrial applications, processes are chemical (chlorine) intolerant, and UV is widely adopted. atg UV Technology engineers will be pleased to discuss solving disinfection problems with you. As well as a powerful disinfectant, UV is used to remove chlorine, chloramines, ozone, bromine, and a wide variety of contaminants from industrial process water. Within micro-electronics facilities for example, UV is used to remove Total Organic Carbon (TOC) from ultra pure rinse water.

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Water treatment for meat processing

    Water is one of the single biggest raw materials used in meat processing, and its quality is of great importance to prevent contamination of food product. The use of contaminated water in the processing plant can spread infection across the whole food batch. This is a cause of serious concern to the food industry, consumers and regulatory bodies, besides that, it causes financial losses and food scare. Chlorine dioxide, a very powerful biocide, has a number of advantages over other products commonly used in the meat processing industry. When properly applied, chlorine dioxide can act as a break in contamination thereby reducing/eliminating cross contamination as well as removing superficial microorganisms before they have an opportunity to become attached and penetrate the carcass.

    By Applied Oxidation LLC based in Chattanooga, TENNESSEE (USA).

  • Premium

    Waste water treatment plants Air quality control by TRS MEDOR Online Odor Monitoring

    ontext & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. Odors are very distinct air contaminants as they generate nuisances. The factors playing a role in the determination of odor annoyance are: odor concentration and intensity, frequency, appreciation, duration, synergy and location. CHROMATOTEC® proposes an automatic solution to well identify the origin and the level of odors.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Pure drinking water solutions for high-security facilities

    In June 2002 an Al-Qaeda cell was captured in Rome just before they poisoned the water supply of the US Embassy. This event demonstrates the added risk that government buildings, military contractors, royal palaces and other high-security facilities can encounter. These facilities should not trust an outside company to deliver bottled water, but instead must stay in full control of their own water supply at all times. Our secure drinking water systems are in over 100 US Embassies around the world because they provide a consistent supply of fresh, distilled water, which is the highest level of protection against the full range of possible contaminants. We provide premium water distillers for these high-security facilities as well as small systems to protect the staff at home. We also provide risk assessment and water education services.

    By Pure & Secure, LLC. based in Lincoln, NEBRASKA (USA).

  • Aquatech Water Management Solutions for Unconventional Gas

    Managing produced water from shale gas wells is challenging and requires a variety of solutions & services. Aquatech offers mobile and/or central facility solutions that provide customers to suit their needs. The demands of field operations on equipment and personnel require a high level of continued dedication, experience, & engineering. Aquatech delivers reliability on all of these fronts to ensure that water management & treatment enable gas production to proceed rapidly and efficiently. Our solutions ensure a consistent water composition, with minimal contamination. This enables predictable production characteristics such as consistent hydro fracturing and minimal down-hole scaling. Most import, Aquatech offers sustainable solutions that are friendly to the environment and to the gas producer. The industry needs treatment standards to exceed current and future regulatory requirements. Our commitment to sustainability sets a standard way beyond what many believe is possible today.

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

  • Real-time In-situ Effluent Monitoring

    The UviLux BOD Indicator enables in-situ, real-time, reporting of BOD within both natural water systems and water processing plants. The monitor detects fluorescent proteins that are inherent within sewage and slurry and provides an output in BOD equivalent units. The principle behind the measurement is the excitation of Tryptophan-like fluorescence within UV wavelength band, which has been shown to correlate with both BOD and bacterial contamination. With complete flexibility of deployment methodology, the UviLux BOD Indicator can be applied to both water supply and water recovery processing plants. For water supply processing, the UviLux BOD Indicator can be applied at the front end to the water intake to provide alarm of any contaminated water entering the plant. Applications within Waste Water Treatment Works can include monitoring of effluent levels at the final outflow point (into rivers and coastal areas) as well as the primary, secondary & tertiary stages, the data potentially feeding into energy saving systems to optimise process performances. The CTG UviLux BOD Indicator in-situ fluorometer can also be used within pipe and channel networks to test for incidences of black water and grey water cross-over.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Premium

    In-Situ Groundwater Remediation for the Site Remediation Industry

    In-situ groundwater remediation method is based on injection of Fe(0) nanoparticles through application wells directly into the contaminated water. nZVI injection is very fast, reaching significantly lower operating costs compared to commonly used remediation methods (expensive construction of reactive barriers, building of pump&treat stations, excavation of contaminated soil etc.). In comparison to other in-situ technologies a far lower quantities of injected chemical is needed due to high efficiency of the product and thus the time and cost of remediation is reduced.

    By NANO IRON s.r.o. based in Rajhrad, CZECH REPUBLIC.

  • GPR

    GPR and EM play an integral part by providing a non-intrusive means of examining the subsurface for environmental hazards such as soil contamination, underground storage tanks and drums. GPR can delineate landfills and pathways for contaminant flow, as well as conduct hydrogeologic investigations such as water table mapping. We offer innovative technology to support site assessment needs.

    By Geomorph Instruments based in Piraeus, GREECE.

  • In-Situ Soil & Groundwater Remediation

    The use of H2O2 to chemically oxidize the contaminants into mineralized products (CO2 , salts, and readily biodegradable organic fragments) offers a number of advantages over these current treatment methods. Benefits of Soil Decontamination by Chemical Oxidation: The reagent used (H2O2) is inexpensive, readily available, and has as its reaction products water and oxygen; The chemistry of the process (Fenton's Reagent) has been known for over 50 years and its applicability to a wide variety of contaminants is well documented; The process is easily applied and controlled; The treatment occurs rapidly, lasting from a few hours to a few weeks; The process produces no by-product wastestreams, and can be tuned for the degree of contaminant removal desired. This allows it to be used synergistically with other technologies such as biotreatment or soil washing.

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • X-ray fluorescence XRF analysis for environmental protection and waste management

    To meet the requirements of new regulations and to protect the environment effectively, industries need techniques that enable the analysis of elements at lowest concentration levels. Bruker X-ray fluorescence (XRF) analysis is the most suitable analytical technique for handling different kinds of materials. Bruker’s XRF, ICP-MS, GC, TOF-MS, FT-IR, CBRNE products and applications help you to monitor contaminated land efficiently and quickly, to determine hazardous elements in the air and water, as well as to classify waste material and to specify products for recycling and disposal. Whether solids, sludge, filters, liquids or powders: there is a fast and simple sample preparation technique for every material type.

    By Bruker Corporation based in Billerica, MASSACHUSETTS (USA).

  • Environmental Monitoring

    Environmental monitoring is becoming more important every day in local, national and international policies, showing the environmental awareness demanded by society.

    This fact gives rise to an increase in the amount of legislation that obliges companies to law enforcement. Thus, the necessity of making more pollutants controls means high analysis expenses to the companies, which need to subcontract this service.

    Although applications in this area advance, there is still a clear demand to get new portable and versatile analysis systems for many different application fields such as pollution in environmental or waste waters, monitoring nutrients in agricultural or horticultural water as well as general process control in chemistry industry. Because of the number of enviromental analysis required, there is a need for screening and monitoring measurements of these compounds at contaminated areas.

    Traditional monitoring techniques are typically based on laboratory analysis of field-collected samples that require considerable effort and expense, and the sample may change before analysis. Moreover, the equipment currently available is too large and expensive and it cannot be made portable.Alternatively, microfluidic and electrochemical sensor technologies can contribute to the development of new portable monitoring systems, complementing standard analytical methods for different environmental monitoring applications.In this way, the decentralization and integration of all those typical analyses is the paramount importance in order to reduce cost, simplify the analytical process and make more accessible these technologies to end-users. The development of portable, robust, and accurate Lab-on-a-Chip systems to monitor priority compounds such as contaminants, explosives, chemical warfare agents, inorganic and organic ions is a demand of modern society. Portability allows analyses to be carried out outside of the laboratory, minimizing the risk of contaminating the sample and leading to a faster response time at a lower cost.

    Thus, MicruX solutions and technologies open the gate to develop portable and esay-handly Lab-on-a-Chip devices in order to improve pollutants in-situ analysis in a very economic and efficient way.

    By MicruX Technologies based in Oviedo, SPAIN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you