Only show results in Virginia? Ok

well water system Applications

  • Water Well Screen Evaluation

    GeoVISION downhole and borehole video camera systems are used to visually examine the condition of irrigation well screens.

    By Allegheny Instruments, Inc. based in Monterey, VIRGINIA (USA).

  • Premium

    Ultraviolet disinfection systems for the well injection water & SRB reduction

    Microorganism and bacteria control is increasingly an important topic of discussion in the oil and gas industry.  Inadequate disinfection and treatment of well injection water and stimulation fluids, used in the recovery of oil and gas has been proven to lead to a host of negative consequences, including: - Souring the well with hydrogen sulphide gas H2S, Microbiological induced corrosion, Loss of fluid stability during injection., Plugging of the well, Damage of equipment and components (e.g. RO membranes, filters)

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Monitoring Well Inspection With 3/4-inch Video Camera

    Allegheny Instrument's Nano downhole camera is used to visually inspect groundwater monitoring wells from 1-inch diameter and larger to depths of 1,000 feet with the Heavy Duty hand reel system and depths of 2,000 feet with the Deluxe motorized winch.

    By Allegheny Instruments, Inc. based in Monterey, VIRGINIA (USA).

  • Premium

    Ultraviolet disinfection systems for the produced water treatment

    With environmental regulations becoming more stringent, and the link between re-injected water quality and operational costs becoming clear to operators, investing early in advanced water treatment solutions for produced water for both reinjection applications and environmental discharges is now a top priority for operators worldwide.  atg UV Technology have provided a number of specialist UV packages for the disinfection of Produced Water in order to reduce microorganisms such as SRB’s (Sulphate Reducing Bacteria), Acid Producing Bacteria and Slime Forming Bacteria, that if left untreated, pose a range of negative consequences including: - Souring the well with hydrogen sulphide gas H2S, Microbiological induced corrosion, Loss of fluid stability during injection, Plugging of the well, Damage of equipment and components (e.g. RO membranes, filters).

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Premium

    Waste Water

    Waste water, especially industrial waste water, is the most challenging water for instrumentation. Mostly, this water is characterized by highly fluctuating loads, very high salt concentrations as well as a high particle density. Hence, the accurancy and speed of measurements depends on the measurement system itself and the oxidation technique used. Obviously, application-specific analyzers provide huge advantages against standard analyzers that are used for all applications.

    By LAR Process Analysers AG based in Berlin, GERMANY.

  • Premium

    Ultraviolet disinfection systems for the process water

    Water is often used as a product, or as part of the manufacturing process. In many industrial applications, processes are chemical (chlorine) intolerant, and UV is widely adopted. atg UV Technology engineers will be pleased to discuss solving disinfection problems with you. As well as a powerful disinfectant, UV is used to remove chlorine, chloramines, ozone, bromine, and a wide variety of contaminants from industrial process water. Within micro-electronics facilities for example, UV is used to remove Total Organic Carbon (TOC) from ultra pure rinse water.

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Filtration systems & solutions for wastewater treatment industry

    The removal of contaminants from untreated water has become a leading issue, due to environmental concerns and the threat of future water shortage. An effective purification process is necessary to eliminate organic, chemical or other debris to meet stringent regulations for drinking water, as well as for the chemical, industrial, pharmaceutical and science markets.

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.

  • Oxygen Generating Systems for Sewage Treatment

    Using Oxygen to Solve Waste Water Problems Lack of oxygen can cause inadequate purification or even anaerobic decomposition, as well as offensive odors. Injecting oxygen into sludge beds &/or piping allows you to: * Reduce nitrogen levels * Meet peak O2 demands * Have a back up to your aeration system * Pre-purify waste water * Control odors * Deter corrosion damage * Meet increased requirements regarding waste water purification

    By Oxygen Generating Systems Intl. (OGSI) based in North Tonawanda, NEW YORK (USA).

  • Water treatment systems for chemical industry

    The effluents that accrue in the cleaning process of silo vehicles and containers for transportation of raw materials for the chemical industry, are highly complex and constantly changing in the composition of wastewater. Flocculation as the prior art of treatment for chemical waste water can not remove many of the completely dissolved invisible substances. Thus, the residual stresses are evident despite high claritv of the `Treated effluent` is often well above the levels witch are applicable for wastewater in domestic environments.

    By Weidner Ireland Ltd based in IRELAND.

  • Stormwater Piping Systems / Stormwater Drainage

    A high-quality drainage system is imperative for a strong infrastructure.  The integrity of roads, thoroughfares, parking lots and other paved surfaces depend on a reliable drainage system underneath to keep them intact.  ISCO has been helping solve customer`s drainage issues for years.  From the initial engineering planning phase to the finished product, ISCO is able to help.  ISCO offers all the pipe and fittings for any of your drainage projects. Selecting the longest-lasting, durable and cost-effective piping products is a key step in storm water management. To help you choose the best option for your project, ISCO Industries supplies HDPE, PVC pipe as well as perforated and HDPE corrugated tubing drain tile for storm water management applications.

    By ISCO Industries, LLC based in Louisville, KENTUCKY (USA).

  • Premium

    Solutions for water treatment and water disinfection

    We produce everything in house: all our products, systems and services. As well as being convenient, this is also smart. Disinfection solutions tailored to your needs offer excellent effectiveness.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Water & Waste Water LIMS Solutions

    Water testing laboratories and laboratories that support water treatment plants have long discovered the benefits of Laboratory Information Management Systems - LIMS. Today many are looking to replace earlier systems with a system that is easier to support, has a proven upgrade path and is highly flexible and configurable. These laboratories as well as new facilities being commissioned will benefit by installing a user specific configuration from the very successful Autoscribe Matrix LIMS software designed specifically for the water and waste water industry.

    By Autoscribe Informatics based in Reading,, UNITED KINGDOM.

  • Premium

    Ultraviolet disinfection systems for the ultrapure water B.O.P. hydraulic operation & subsea control fluid treatment

    Advanced UV Treatment for Blow Out Preventer (B.O.P.) Control & Operation Hydraulic Fluids fluids atg UV Technology have successfully completed pilot trials to prove the effectiveness of UV disinfection in treating hydraulic fluids used for subsea B.O.P. (Blow Out Preventer) control and operation. UV light is a chemical-free, physical disinfection technique that is widely used throughout the offshore sector for applications such as potable water disinfection, RO membrane protection and for the reduction of Sulphate Reducing Bacteria (SRB’s) from well injection fluids and produced water.

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Water quality monitoring systems for wastewater & effluents monitoring industry

    Instruments for monitoring the aeration-process, nitrification and de-nitrification; chlorination and de-chlorination; as well as the final discharge into the environment.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Cooling Towers and Process Water System Cleaning Applications Using Hydrogen Peroxide

    The unique properties of hydrogen peroxide (H2O2) make it a good technology for keeping cooling loops, process water loops and heat exchangers clean from fouling that can occur due to various contaminants in the water. Hydrogen peroxide works well in removing organic fouling on surfaces through mechanical means and in specific applications through biocidal mechanisms. Hydrogen peroxide can be used in a shock treatment mode where it is fed based on a timer set-up. It can also be used occasionally at higher concentrations for maintenance cleaning purposes of fouled heat exchangers, cooling water loops and process water loops. Performing an occasional shock cleaning of a heat exchanger with hydrogen peroxide can remove buildup from surfaces and can result in improved heat transfer efficiency. By removing surface fouling, hydrogen peroxide may also improve the efficiency of other biocides such as bleach, bromine and non-oxidizers.

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Water Contamination Detection

    Security of water assets is becoming an increasingly major issue that demands immediate and robust alarms for potential contamination. In addition to this, natural growth of algae is a common problem for water asset managers, the results of which can increase maintenance costs of water processing plants as well as directly effecting water taste. The CTG FastGuard fast repetition rate fluorometer analyses information on the physiological state of the algae it monitors within an in-line flow system. A number of key parameters are monitored and analysed by the on-board embedded software, which instantly initiates both an audible and visual alarm on detection of a contaminant within the water system. The FastGuard is a robust low maintenance system which avoids false positives often provided by other contamination detection systems.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Ozone/UV systems for swimming pool water treatment

    Studies have proven that chlorine use has negative consequences due to the formation of byproducts, i.e. chlorinated organic compounds and chloramines. Irritation of eyes and mucous membranes, drying out the skin as well as “chlorine smell” are well known troubles. However, these byproducts also accelerate the corrosion in pool halls and significant risk is given by their toxicity (chloramines, combined chlorine) and/or carcinogenicity. Higher rate of asthma prevalence is one of the consequences. These are the reasons why the combined chlorine content - as a marker of chlorination byproducts presence - is to be monitored and why its limit values are specified by authorities. To meet the limits can be tedious and expensive because more water has to be changed and heated up. Chlorine disinfection is not sufficient to prevent infections caused by some waterborne pathogens as dangerous protozoan parasites Cryptosporidium parvum and Giardia lamblia.

    By LIFETECH based in Brno, CZECH REPUBLIC.

  • Premium

    Water Treatment Solutions for Uranium Removal

    AdEdge provides treatment systems for for Uranium removal using AD92 an anion exchange media that is ideal for use in potable water as well as non-potable and environmental remediation applications for removal of naturally occurring uranium. The high efficiency AD92 can selectively remove the negatively charged uranium anion (most often in the form of uranyl carbonate) to below the existing EPA MCL of 30 ug/L. The AdEdge AD92 systems can deliver the needed performance in two ways: (1) via regeneration type systems which use the media to remove the uranium with periodic regeneration using NaCl brine; or (2) as a “throw away” discardable media, which can be discarded when spent. This option maximizes the very high capacity of the AD92. Where on-site regeneration is not available, this disposal option is the preferred option. Disposal options will vary based on federal, state, and local regulations.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Water Data Management Solution for Urban Hydrology

    Use KISTERS solutions to manage all of the various data from your Urban Water Management programs. From water distribution to water treatment, infiltration and inflow studies, groundwater, as well as long term precipitation monitoring and real time control systems. An optional water quality module is also available to manage your discrete sample data.

    By KISTERS AG based in Aachen, GERMANY.

  • Oil in Water Monitoring

    Detection of hydrocarbons within both water sources and effluent intake to Waste Water Treatment Works is an increasing requirement. The UviLux Hydrocarbon fluorometer detects hydrocarbons in water at very low concentrations. This in-situ fluorometer provides a rugged sensor which can be deployed in a wide variety of configurations. The UviLux is part of the Lux range of CTG fluorometers, and can be provided with a number of options with regard to signal protocols, and has available accessories to enable in-flow monitoring as well as inclusion within portable systems for taking measurements in the field.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you