Only show results in Virginia? Ok

well water treatment system Applications

  • Oxygen Generating Systems for Sewage Treatment

    Using Oxygen to Solve Waste Water Problems Lack of oxygen can cause inadequate purification or even anaerobic decomposition, as well as offensive odors. Injecting oxygen into sludge beds &/or piping allows you to: * Reduce nitrogen levels * Meet peak O2 demands * Have a back up to your aeration system * Pre-purify waste water * Control odors * Deter corrosion damage * Meet increased requirements regarding waste water purification

    By Oxygen Generating Systems Intl. (OGSI) based in North Tonawanda, NEW YORK (USA).

  • Filtration systems & solutions for wastewater treatment industry

    The removal of contaminants from untreated water has become a leading issue, due to environmental concerns and the threat of future water shortage. An effective purification process is necessary to eliminate organic, chemical or other debris to meet stringent regulations for drinking water, as well as for the chemical, industrial, pharmaceutical and science markets.

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.

  • Water treatment systems for chemical industry

    The effluents that accrue in the cleaning process of silo vehicles and containers for transportation of raw materials for the chemical industry, are highly complex and constantly changing in the composition of wastewater. Flocculation as the prior art of treatment for chemical waste water can not remove many of the completely dissolved invisible substances. Thus, the residual stresses are evident despite high claritv of the `Treated effluent` is often well above the levels witch are applicable for wastewater in domestic environments.

    By Weidner Ireland Ltd based in IRELAND.

  • Premium

    Water Treatment and Water Disinfection

    We produce everything in house: all our products, systems and services. As well as being convenient, this is also smart. Disinfection solutions tailored to your needs offer excellent effectiveness.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Water Treatment for Personal Care / Water Treatment for Cosmetics

    B & V Effluent Services has been helping the cosmetics and personal care industry with their waste water management for a number of years. This has allowed B & V Effluent Services to develop a specific skill set and technical knowledge to help us provide excellent solutions to a number of blue chip companies within this industry. Modern manufacturing production systems have been developed to use cleaning water more efficiently however this water for a variety of reasons brings about a series of challenges when discharged as part of a sites effluent. B & V Effluent Services experience within this industry enables us to provide solutions to all manner of issues as well looking to optimise systems and save money for our clients wherever possible.

    By B & V Water Treatment based in Daventry, UNITED KINGDOM.

  • Premium

    Water Treatment Solutions for Uranium Removal

    AdEdge provides treatment systems for for Uranium removal using AD92 an anion exchange media that is ideal for use in potable water as well as non-potable and environmental remediation applications for removal of naturally occurring uranium. The high efficiency AD92 can selectively remove the negatively charged uranium anion (most often in the form of uranyl carbonate) to below the existing EPA MCL of 30 ug/L. The AdEdge AD92 systems can deliver the needed performance in two ways: (1) via regeneration type systems which use the media to remove the uranium with periodic regeneration using NaCl brine; or (2) as a “throw away” discardable media, which can be discarded when spent. This option maximizes the very high capacity of the AD92. Where on-site regeneration is not available, this disposal option is the preferred option. Disposal options will vary based on federal, state, and local regulations.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Water Data Management Solution for Urban Hydrology

    Use KISTERS solutions to manage all of the various data from your Urban Water Management programs. From water distribution to water treatment, infiltration and inflow studies, groundwater, as well as long term precipitation monitoring and real time control systems. An optional water quality module is also available to manage your discrete sample data.

    By KISTERS group based in Aachen, GERMANY.

  • Cooling Towers and Process Water System Cleaning Applications Using Hydrogen Peroxide

    The unique properties of hydrogen peroxide (H2O2) make it a good technology for keeping cooling loops, process water loops and heat exchangers clean from fouling that can occur due to various contaminants in the water. Hydrogen peroxide works well in removing organic fouling on surfaces through mechanical means and in specific applications through biocidal mechanisms. Hydrogen peroxide can be used in a shock treatment mode where it is fed based on a timer set-up. It can also be used occasionally at higher concentrations for maintenance cleaning purposes of fouled heat exchangers, cooling water loops and process water loops. Performing an occasional shock cleaning of a heat exchanger with hydrogen peroxide can remove buildup from surfaces and can result in improved heat transfer efficiency. By removing surface fouling, hydrogen peroxide may also improve the efficiency of other biocides such as bleach, bromine and non-oxidizers.

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Ozone/UV systems for swimming pool water treatment

    Studies have proven that chlorine use has negative consequences due to the formation of byproducts, i.e. chlorinated organic compounds and chloramines. Irritation of eyes and mucous membranes, drying out the skin as well as “chlorine smell” are well known troubles. However, these byproducts also accelerate the corrosion in pool halls and significant risk is given by their toxicity (chloramines, combined chlorine) and/or carcinogenicity. Higher rate of asthma prevalence is one of the consequences. These are the reasons why the combined chlorine content - as a marker of chlorination byproducts presence - is to be monitored and why its limit values are specified by authorities. To meet the limits can be tedious and expensive because more water has to be changed and heated up. Chlorine disinfection is not sufficient to prevent infections caused by some waterborne pathogens as dangerous protozoan parasites Cryptosporidium parvum and Giardia lamblia.

    By Lifetech based in Brno, CZECH REPUBLIC.

  • US Peroxide Rapid Response

    US Peroxide (USP) is uniquely positioned to rapidly respond to your environmental treatment challenges. USP combines experienced applications and equipment field support with a large inventory of storage systems and pumping modules to respond quickly to time sensitive water and wastewater treatment situations. Advantages With considerable inventory of tank and pump systems as well as our partnerships with leading chemical suppliers, USP can mobilize chemicals and equipment quickly to respond to your rapid response needs, often within 24 hours. We offer dosing options are designed to meet all safety requirements and sized to meet your specific process and dosage rates requirements. Our Applications Engineers and Equipment and Engineering Services teams will provide timely and thorough applications assistance and technical support during the entire project. Download the Rapid Response Solutions Brochure (PDF) Sample Applications Examples of where our Rapid Response Program has successfully addressed treatment challenges include the following: Temporary application of hydrogen peroxide as a source of supplemental dissolved oxygen in biological treatment systems during periods of excessive BOD loading Hydrogen peroxide pretreatment of high strength wastewater to reduce toxicity or BOD/COD prior to biological treatment Emergency hydrogen peroxide treatment of lagoons or ponds to control hydrogen sulfide and other odors Shock cleaning of cooling water systems for biofouling and slime control

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • EPR waste minimisation monitoring for wastewater treatment industry

    The EPR regulations have replaced the IPPC regulations and are effective from May 2009 for qualifying companies within the industrial sector and October 2009 within the water sector. They will progressively require industry to minimise waste, reduce product loss and implement improved process control. The legislation will require the operator to self monitor processes and discharges, to demonstrate effective control with particular emphasis on EPR compliance and prevention. The regulating Agency will operate a point scoring system to assess operators under the OMA-3 program and this will be used to identify how well a company is managing their processes and possibly identify areas for improvement. The Environmental Permitting Regulations require industry to install instrumentation (MCERTS approved where available) to report water quality. EPR compliance monitoring may include automatic water sampling, flow measurement, pH, turbidity and TOC water analysis. Industry will need to identify point of source emissions, take steps to correct inefficient control and alarm unacceptable process deviations. Although the legislation focuses on environmental improvement, good housing keeping also makes a lot of sense. Optimisation of process control minimises waste, reduces treatment costs and ultimately saves money.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Premium

    Aerobic digestion for isolated commercial wastewater treatment plants

    Jet’s package commercial wastewater treatment plants (aerobic treatment systems) have made it possible for motels, shopping centers and service stations to be constructed along interstate highways far from any town. With a Jet package commercial wastewater treatment plant: Subdivisions can be developed miles beyond sewer lines; factories can be erected in rural areas; and people can live and work in isolated areas in places such as Guam and Peru as well as in the world’s deserts, deep valleys and mountain ranges.

    By Jet Inc. based in Cleveland, OHIO (USA).

  • Aquatech Enhanced Oil Recovery (EOR)

    In a Steamflood Enhanced Oil Recovery (EOR) process, steam is injected in the well, lowering the viscosity of heavy oil suitable for extraction through the production wells. The fluid from the wells is a mixture of oil, water and gas and goes through a separation system to separate the three. The separated produced water is heavily contaminated with dissolved solids and hydrocarbons. Aquatech’s Steamflood Enhanced Oil Recovery (EOR) Technology offers the integrated solutions for the treatment EOR produced water for boilers, generating a purified product that can be reused for the production and injection of steam. Our turnkey approach to treatment includes coordinating the logistics of wastewater removal off-site and any sludge disposal.

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

  • Premium

    Water treatment chemicals for the food & beverage industry

    The food and beverage industry is suffering from severe economic pressure. Efficient and continuous production processes are therefore business critical. By choosing Kurita concepts for your cooling water, boiler water and waste water plants as well as your reverse osmosis systems and autoclaves – all of which are specially adapted to your needs – you opt for economic and ecological treatment, leading to more productivity and cost-efficiency.

    By Kurita based in Ludwigshafen, GERMANY.

  • Wastewater Treatment for Manufacturing

    B & V Effluent Services have been helping the manufacturing industry with its waste water management for a number of years. This has allowed B & V Effluent Services to develop a specific skill set and technical knowledge to help us provide excellent solutions to a number of blue chip company’s within the manufacturing industry. Modern manufacturing production systems have been developed to use cleaning water more efficiently however this water for a variety of reasons brings about a series of challenges when discharged as part of a sites effluent. B & V Effluent Services experience within this industry enables us to provide solutions to all manner of issues as well looking to optimise systems and save money for our clients wherever possible.

    By B & V Water Treatment based in Daventry, UNITED KINGDOM.

  • Water & Waste Water LIMS Solutions

    Water testing laboratories and laboratories that support water treatment plants have long discovered the benefits of Laboratory Information Management Systems - LIMS. Today many are looking to replace earlier systems with a system that is easier to support, has a proven upgrade path and is highly flexible and configurable. These laboratories as well as new facilities being commissioned will benefit by installing a user specific configuration from the very successful Autoscribe Matrix LIMS software designed specifically for the water and waste water industry.

    By Autoscribe Informatics based in Reading,, UNITED KINGDOM.


    Scalewatcher North America, manufacturer of the original, patented and award-winning computerized electronic water-conditioner, states in its literature that the device is produced to last at least 20 years and comes with a 10 year warranty. However, no reports have been received on the longevity of the units sold since the company was launched over 20 years ago. Now a customer in Gilroy, California has come forward requesting a new Scalewatcher unit after the device she purchased in 1992 finally stopped working. She purchased the new Scalewatcher from local dealer, Aqua Genesis, and reported that: “ I noticed that the sprinklers are covering more of an area than before. When I squirt water on the black and white tile patio table there are no longer any calcium spots even if I do not dry it off. The tile shower and the clear shower door are easier to wipe down after my shower. The new ScaleWatcher is much better than before. It certainly was time to replace the old one.” The new, innovative, electronic Scalewatcher water conditioner uses proven technology to quickly and effectively dissolve existing limescale and prevent it recurring, returning water systems and water-fed appliances such as kettles, washing machines and dishwashers to their former efficiency. It also removes scale around faucets, sinks, baths, plugholes and shower roses as well as preventing white marks on shower screens and mould on shower curtains. The system requires no plumbing, chemicals or maintenance and is environmentally friendly. In addition scale costs money for householders through additional cleaning products, the early renewal of water–fed equipment and additional costs to heat water. It is estimated that 40% more energy is needed to heat water in a system fouled with ¼ inch of limescale. Commenting Jan de Baat Doelman, President of Scalewatcher North America says: “We have always built Scalewatcher electronic water conditions to last and this latest information confirms the device’s longevity. Scalewatcher will pay for itself in less than three years and then carry on providing homes with a scale free environment many more years to come. ” Scalewatcher models are based on continuous research and over 20 years experience and expertise as market leaders in electronic scale control with countless units sold worldwide. The patented Scalewatcher systems start at $248.00 USD and are capable of treating pipe sizes from one to 120 inches. All Scalewatcher systems come with a full performance guarantee and include free shipping throughout North America.

    By Scalewatcher North America Inc. based in Oxford, PENNSYLVANIA (USA).

  • Oil in Water Monitoring

    Detection of hydrocarbons within both water sources and effluent intake to Waste Water Treatment Works is an increasing requirement. The UviLux Hydrocarbon fluorometer detects hydrocarbons in water at very low concentrations. This in-situ fluorometer provides a rugged sensor which can be deployed in a wide variety of configurations. The UviLux is part of the Lux range of CTG fluorometers, and can be provided with a number of options with regard to signal protocols, and has available accessories to enable in-flow monitoring as well as inclusion within portable systems for taking measurements in the field.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Real-time In-situ Effluent Monitoring

    The UviLux BOD Indicator enables in-situ, real-time, reporting of BOD within both natural water systems and water processing plants. The monitor detects fluorescent proteins that are inherent within sewage and slurry and provides an output in BOD equivalent units. The principle behind the measurement is the excitation of Tryptophan-like fluorescence within UV wavelength band, which has been shown to correlate with both BOD and bacterial contamination. With complete flexibility of deployment methodology, the UviLux BOD Indicator can be applied to both water supply and water recovery processing plants. For water supply processing, the UviLux BOD Indicator can be applied at the front end to the water intake to provide alarm of any contaminated water entering the plant. Applications within Waste Water Treatment Works can include monitoring of effluent levels at the final outflow point (into rivers and coastal areas) as well as the primary, secondary & tertiary stages, the data potentially feeding into energy saving systems to optimise process performances. The CTG UviLux BOD Indicator in-situ fluorometer can also be used within pipe and channel networks to test for incidences of black water and grey water cross-over.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Continuous Monitoring of Nitrates and Other Water Quality Parameters

    Nitrate is one of the most important parameters in assessing surface and ground water quality. Nitrates are naturally present in surface and ground waters in low concentrations, but are harmful to humans and livestock and cause aquatic ecosystem degradation in high concentrations. Nitrates enter the environment as human-induced pollution from a variety of sources, but the largest source is from agricultural fertilizer runoff . Other sources include wastewater treatment discharge, septic systems, and from pet waste. Nitrate is highly soluble in water and therefore readily leaches into water sources, whereas other human associated pollutants, such as phosphates and ammonia, are not transported as easily. This ability to be quickly transported into ground and natural waters such as drinking water wells, aquifers, reservoirs, lakes, and streams, coupled with its health and environmental implications make nitrate pollution and monitoring of major concern.

    By Hanna Instruments based in Woonsocket, RHODE ISLAND (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you