Only show results available in Virginia? Ok

wood energy Applications

  • Energy and Fuels from Wood Wastes and Biomass

    Wood wastes include woods from forestry, railways – sleepers, telecoms – telephone poles, timber manufacturing processes and the construction industry. Many of these types of wood tend to be contaminated with chemicals and other materials. This contamination can make the waste wood difficult to use in traditional biomass to energy processes and potentially hazardous to the environment. Our Gasplasma® energy from waste technology is able to transform efficiently the organic biomass into a pure, hydrogen-rich synthesis gas and safely destroys any harmful or hazardous inorganic chemicals. All inorganic materials are made inert and vitrified into an environmentally benign product called Plasmarok® which can be sold as an aggregate for construction, generating a revenue stream.

    By Advanced Plasma Power (APP) based in Swindon, UNITED KINGDOM.

  • Wood pellet stove, wood pellet boiler

    Ceramic igniter for wood pellet stove ignition

    By FKK Corporation based in Kyoto, JAPAN.

  • Premium

    Industrial shredders system for wood inddustry

    It’s more than just wood!  It is an invaluable sustainable resource which can be utilised down to the last splinter. With WEIMA wood shredders there are no limits. Woodchips can be used directly for energy generation or for briquetting. Valuable space can be saved for more productive uses. WEIMA has the know-how covering all the relevant factors for a most efficient and homogenous wood shredding solution.

    By WEIMA based in Ilsfeld, GERMANY.

  • Wood Cogeneration for Industry

    Any company that has a need for both heat and power is an ideal fit for the Borealis wood power system, especially if located in a rural setting where energy costs are high. The application requirement must be for the full 45 kWh of power for immediate use. If power requirement is not that high, then this energy can be sold to the regional power grid often at preferred rates. Options for off-grid solutions are being reviewed.

    By Borealis Wood Power Corp. based in Burlington, ONTARIO (CANADA).

  • Low-temperature belt dryer for sawdust, pellets, wood chips and other biomass products

    Low-temperature belt dryer for sawdust, pellets, wood chips and other biomass products

    By STELA Laxhuber GmbH based in Massing, GERMANY.

  • Premium

    Air pollution control (APC) equipments for forest industry

    In the forest industry, it becomes increasingly important to improve energy efficiency. EnviBAT specializes in gas/gas heat exchange where heat is recovered from the outgoing gas streams, and mist gas condenser, where large amounts of heat can be recovered from the sulphate pulp mills.

    By Envibat AB based in Skellefteå, SWEDEN.

  • SRF

    SRF Manufacture is an alternative fuel produced by shredding and dehydrating solid waste, typically consisting of combustible components of solid waste, including paper, card, wood, textiles and plastic. It can be produced to a range of specifications to meet customer requirements. Solid Recovered Fuel Manufacture The materials used to produce Solid Recovered Fuel pass through a series of shredders, screens, air classifiers/density separators and magnets. Inert materials, recyclable plastics and metals are extracted from the shredded material, leaving a mix of mainly non-recyclable paper, card, wood, textiles and plastic. Although a small proportion of these materials can be recycled the quality of these materials is compromised once they enter the residual waste stream and recovering energy from these materials is currently the best environmental option. For More information: https://the-mkgroup.com/portfolio/srf-manufacture/

    By MK Group based in Galbally, IRELAND.

  • Pyrolysis oil to diesel

    Pyrolysis oil to diesel continuous waste pyrolysis oil to diesel Solution: Oil refining machine Applicable: Tire oil, Plastic oil, Waste oil, Pyrolysis oil,Engine oil, Black oil, Heavy oil, etc Output: 85-90% good clean oil, the rest is slag and waste gas Heating fuel: Coal / wood/ fuel oil / gas Oil refining machine land size: 20X15m Reactor material:Q245/ Q345 Boiler plate

  • Continuous process waste plastic to oil recycling

    continuous waste plastic to oil Solution: Continuous pyrolysis plant Function: Recycling waste plastic to fuel oil Applicable raw material: ABS / Mixed plastic, PE/PP/PS Plastic, PET Plastic not recommended Output: 50-90% fuel oil ,10-50% carbon blakc Heating fuel: Coal / wood/ fuel oil / gas Pyrolysis plant land size: 25x20m Reactor design: Mutiple reactors with internal rotating Reactor material: Q245/ Q345 Boiler plate

  • Continuous process waste tyre to oil recycling

    Solution: Continuous pyrolysis plant Function: Recycling waste tire to fuel oil Applicable raw material: Car tire, Truck tires, OTR tries, etc Output: 45-52% crude oil, 30% carbon black,12-15%steel wire, 8% waste gas Heating fuel: Coal / wood / fuel oil / gas Pyrolysis plant land size: 25x20m Reactor design: Mutiple reactors with internal rotating Reactor material: Q245/Q345 Boiler plate

  • Material handling equipment for biomass energy industry

    You`ll find Jeffrey Rader`s equipment employed in many stages of woody biomass processing. Woody Biomass is the residual waste wood that results from the lumber manufacturing process. It is burned in a boiler to generate steam that is used both in the lumber-drying process and to produce electricity. Jeffrey Rader is a leader in serving the electric utility industry with boiler feed systems (pneumatic and mechanical) for producing electric power from biomass materials.

    By TerraSource Global based in St. Louis, MISSOURI (USA).

  • Premium

    Gas Sensing for Gasification

    Syngas (short for synthetic gas) can be burnt and used as a fuel source, the main constituents of syngas are Carbon Monoxide (CO) and Hydrogen (H), which amount for around 85% of Syngas, and it is produced by a process called Gasification. Gasification starts with a base material which can originate from a wide variety of materials for example wood chips and pellets, plastics, municipal solid waste, sewage, waste crops, and fossil fuels such as coal. During Gasification the base material is reacted at high temperature without combustion with controlled amounts of oxygen (O) or steam. The composition of the base material combined with the amount of oxygen and heat used in the process affects the composition of the resultant SynGas, in which the CO can vary between around 20 and 60%. In addition, large amounts of H and CO are also formed. The measurement of CO is therefore an important feature in the production of SynGas.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Measurement solution for Biomass combustion research

    The use of alternative combustion fuels that provide a renewable source of energy is a major area of research and investment. Sources of biomass fuels include virgin wood, energy crops, agricultural residues, food waste and industrial waste. Controlling the combustion process of any new fuel and keeping track of the biomass fuel emissions of combustion by-products is important to users of these new fuels.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Organic Rankine Cycles for Biomass Combustion

    The Triogen ORC can be used with biomass combustion, for example sawdust, chips, bark and treated wood; and other biomasses, such as straw, rice, husks and bio-sludge, as well as other high organic-content waste. The Triogen ORC will be connected to the combustor. The Triogen ORC converts the flue gasses from the combustor into electricity.

    By Tri-O-Gen B.V. based in Goor, DE, NETHERLANDS.

  • Premium

    Applications and Air Pollutants Removed in the Biomass Industry

    Flue gas particulate and acid gases from biomass and bagasse boilers. Removal of ethanol, CO2 scrubbers and yeast cells from fermenters.  Removal of ash particulate, tars, acid gases and ammonia from steam reformers, gasifiers, pyrolosis units and cooling of syngas streams to acceptable limits to enable use as a fuel source for power generation or as a feedstock for chemical products. For tar removal, combination technologies can be used including oil based scrubbing solutions to reduce waste water generation. Ethanol and yeast cell removal from fermenter off-gases. Methanol from processing operations. Hydrogen sulfide removal on landfill, digester and producer gases with regenerable chemistries. Odor control for biomass storage facilities including carbon monoxide removal in wood chip storage areas. 

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    SSI builds shredding systems for alternative fuels processing

    SSI has been designing and manufacturing size reduction systems to prepare solid wastes for thermal treatment or conversion to alternative fuel. SSI has supplied hundreds of systems worldwide for generating energy from many different waste materials—from industrial, municipal, and hazardous wastes to tires, mill waste, wood and other organic materials.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • WPC & PPC

    The WPC and PPC industry is still relatively new but has developed a lot of its own equipment over the years. With the MAS Extruder line we offer a co-rotating conical extruder that can combine the typical two steps of the blending of dried wood or paper fibers with plastic and the extrusion to profile in a single machine. This integration results in a greater reduction in required floors pace as well as in energy consumption. For the preparation of wood and paper fibers as well as recycled plastic film, we also offer shredding, cleaning and granulating equipment.

    By eFACTOR3 LLC based in Pineville, NORTH CAROLINA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you