Applications in Asia & Middle East

Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors have...

By Myron L Company Distributor in THAILAND.

By Analytik Jena AG Office in Hanoi City, VIETNAM.

Environmental control technologies for the environmental/emissions sector.

By Dürr Megtec LLC Office in Shanghai, CHINA.

Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car wash.

By Myron L Company Distributor in THAILAND.

High-Spec Instrumentation by Analytik Jena provides you a deeper understanding of chemical composition and properties for advanced materials in both QC/QA and research. Our easy to handle, high sensitivity instrumentation not only simplifies your daily routines it is designed to improve your products specifications.

By Analytik Jena AG Office in Hanoi City, VIETNAM.

The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before...

By Myron L Company Distributor in THAILAND.

Environmental regulations for air pollution cotrol at metal decorating and packaging facilities usually address can makers, base coil coaters, or metal parts and packaging manufacturers. Metal Decorating can be classified as any process where metal is formed painted, or coated. Metal Packaging is generally considered processes involved in the production of aluminum cans, light metal containers, closures and components.

By Anguil Environmental Systems, Inc. Office in Wujiang City, CHINA.

Pulp and paper production with none of the odor. Pulp and paper manufacturing is a notorious source of nuisance odors, often stemming from hydrogen sulfide, mercaptans and sulfur dioxide. Fortunately, Ecosorb products offer a natural and effective solution to neutralize these odors and all others associated with the paper and pulp industry. Ecosorb odor eliminators have been used repeatedly by large paper and pulp manufacturers to control odors around on-site black liquor lagoons, primary clarification ponds and...

By OMI Industries (OMI) Distributor in Dubai, UNITED ARAB EMIRATES.

Control Asphalt Odors Naturally: The production of hot mix paving asphalt generates odors that can be strong, persistent, and a nuisance to employees and neighbors alike. Controlling and abating these odors can be a challenge.

By OMI Industries (OMI) Distributor in Dubai, UNITED ARAB EMIRATES.

Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can...

By Myron L Company Distributor in THAILAND.

Dürr MEGTEC provides custom-designed atomizing technologies and air pollution control solutions for the non-ferrous metallurgical industry, including aluminum, copper, nickel, zinc, and precious metals producers. Our evaporative gas cooling and conditioning system controls high-temperature furnace and converter off-gases, lowering them to temperatures below other spray technologies without wetting problems.

By Dürr Megtec LLC Office in Shanghai, CHINA.

Anguil`s engineering expertise has led to numerous successful air pollution control and emission control installations in the automotive manufacturing industry. From painting vehicles to engine test stations and tire manufacturing, we have supplied oxidizers and heat recovery systems to both tier 1 and tier 2 automotive plants.

By Anguil Environmental Systems, Inc. Office in Wujiang City, CHINA.

By Analytik Jena AG Office in Hanoi City, VIETNAM.

By Analytik Jena AG Office in Hanoi City, VIETNAM.

The OSEI Corporation manufactures a first response bioremediation product Oil Spill Eater II that has been used to clean up leaks around storage tanks from valve breaks, line breaks and small holes in tanks, as well as for tank sludge clean outs. OSE II has been cleaning up oil/hydrocarbon based spills including heavy oils, sludge, drilling mud, tailings as well as refined product since 1989.

By OSEI - Oil Spill Eater International, Corp Distributor in Ruby Industrial Complex, SINGAPORE.

The OSEI Corporation manufactures a first response bioremediation product Oil Spill Eater II that has been used to clean up leaks around storage tanks from valve breaks, line breaks and small holes in tanks, as well as for tank sludge clean outs. OSE II has been cleaning up oil/hydrocarbon based spills including heavy oils, sludge, drilling mud, tailings as well as refined product since 1989.

By OSEI - Oil Spill Eater International, Corp Distributor in Ruby Industrial Complex, SINGAPORE.

The remediation division of Anguil Environmental Systems (formerly known as Global Technologies) is focused on treating emissions and water contaminants extracted from below the earths` surface. Formed shortly after the 1990 Clean Air Act targeted emissions associated with the extraction of polluted compounds from contaminated sites, Global subsurface remediation equipment has been successfully applied on contaminated sites in North and South America, Europe, Asia and Australia.

By Anguil Environmental Systems, Inc. Office in Wujiang City, CHINA.

Fluence has decades of experience providing sustainable treatment solutions for power industry process water and effluent. Industrialization and population growth are spurring the demand for power around the world, putting pressure on fuel and water resources. At the same time, power producers face strict pollution and air-quality controls.

By Fluence Corporation Office in Caesarea, ISRAEL.

Fluence has more than 30 years of experience in the design, construction, and operation of water and wastewater treatment plants for municipal clients, government entities, communities, emergency relief, and private use. Fluence delivers decentralized, co

By Fluence Corporation Office in Caesarea, ISRAEL.

A solid solution for solid waste odors. All areas of solid waste handling are, by nature, odorous affairs. Municipal sludge, municipal solid waste, landfills, composting and co-composting facilities all generate odors that can be offensive to workers and the community at large. The process is a complex one, with multiple drops, collections, transfers and sortings of recyclable and non-recyclable material. Combustible materials are then incinerated for energy production.

By OMI Industries (OMI) Distributor in Dubai, UNITED ARAB EMIRATES.