Applications in Australasia

  • Computerized instrumentation for the medical gas flow and scientific research

    Environics gas mixing, blending and dilution systems provide for precise mixing of gases for a wide variety of clinical applications. Our systems can produce gas concentrations from percent to ppb levels for single or multi-point calibration. The high accuracy of our mixers make them the units of choice for a wide variety of laboratory and research applications. For example, Environics Biological Atmosphere Incubation Mixers provide stable and accurate gas mixes for any laboratory or clinical need. You can...

    By Environics, Inc. Distributor in Caringbah, AUSTRALIA.

  • Ambient Monitor Gas Calibration with Ozone Generators

    Environics® Ambient Monitor Calibrator with Ozone Generators facilitate dynamic calibration of ambient air analyzers. These instruments automatically perform zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, O3, hydrocarbons and other gases of interest. All ozone generators are factory calibrated using a NIST traceable ozone standard. The Series 6100, Series 6103 and Series 9100 all meet or exceed U.S. Environmental Protection Agency requirements.

    By Environics, Inc. Distributor in Caringbah, AUSTRALIA.

  • Gas detection analyzers for pollution control

    Government and environmental groups are forcing industries with medium to high VOC exhausts to reduce emissions by as much as 98%. Incineration using pollution control devices such as oxidizers and flare stacks is one way to bring the exhaust emissions in line with the regulations. Capturing and reusing solvent in a solvent recovery system is another way.

    By Control Instruments Corporation Distributor in Nottinghill, AUSTRALIA.

  • Gas detection analyzers for wastewater treatment industry

    Regulations prohibit facilities from discharging flammable or explosive wastes from their processes into the wastewater collection system. These wastes are not only a fire and explosion hazard but they can also effect the efficient and effective operation of the treatment facility. PrevEx Flammability analyzers are used to continuously monitor the waste stream for flammable gases and vapors. Their unique design and operating technology make them the ideal analyzers for the harsh conditions found in the sewer...

    By Control Instruments Corporation Distributor in Nottinghill, AUSTRALIA.

  • Emission control & air dedusting for steel and ferrous alloys

    teel and ferrous alloys production happens in industrial manufacturing processes which involve high temperature exhaust streams, often at more than 900 ºC. Typically, the gas flows into a gas conditioning tower to cool down to approximately 200 ºC, before entering into an ESP. These flue gases from steel or ferrous alloys kilns are also very maintenance demanding for bag filters and the very small size of the particles limit the use of usual dedusters such as regular cyclones and multicyclones...

    By Advanced Cyclone Systems, S. A. Distributor in Wellington, NEW ZEALAND.

  • Fire Danger Rating / Forecasting

    For various reasons, including the changing global climate, wildfires are getting bigger, more destructive and more expensive. Effective, consistent and reliable detection of climate parameters is the key to preventing wildfires and managing the impact they have. Our equipment resides for decades in solitary confinement generally in very remote areas (often at the tops of mountains or deep within a national forest), constantly measuring and recording weather data. Once per hour, this data is transmitted back to...

    By FTS Distributor in Kingsland, Auckland, NEW ZEALAND.

  • Remote monitoring stations

    The Water Survey of Canada, a division of Environment Canada, is a federal government agency responsible for collection, interpretation and dissemination of water source data and information. As a division of Environment Canada, the Water Survey of Canada (WSC) covers a vast range of topographical environs from Arctic Canada to the US border with elevations varying from sea level to over 13,000 feet (4,000 metres). An estimated 7% of the world’s renewable water supplies are found in Canada. Canada’s hydrology is...

    By FTS Distributor in Kingsland, Auckland, NEW ZEALAND.

  • Containers for empty and partially empty aerosols

    Bins for disposal of empty or partially empty aerosols.

    By P. Henkel GmbH Distributor in Glendene, NEW ZEALAND.

  • Precision moisture analysis instruments for fast, accurate solids analysis for wastewater

    Computrac moisture, solids and ash analyzers are able to quickly and easily determine solids content of cakes, slurries and sludge samples for the wastewater, hazardous waste and landfill industries. Identifying the optimal solids content of these byproducts of the treatment process can provide significant cost savings on chemical additives, haulage and incineration. Computrac analyzers are easy to use and their rugged and reliable design means that you’ll get accurate results whether they’re in...

    By Arizona Instrument LLC Distributor in Auckland, NEW ZEALAND.

  • Precision moisture analysis instruments for mercury detection in mining

    The Jerome family of mercury vapor analyzers makes it easy to comply with MSHA regulations and keep your coworkers safe from mercury vapor. All Jerome analyzers are built in the USA and are tough enough to stand up to the rigors of daily work in a mine. Whether you need a rugged, no-frills mercury analyzer, advanced data management capabilities, ultra-low-level detection, or fixed-point mercury vapor monitoring, there is a Jerome instrument that fits your needs. No matter what you’re mining or where...

    By Arizona Instrument LLC Distributor in Auckland, NEW ZEALAND.

  • Gas infusion technology solutions for the water treatment industry

    Every municipality in the developed world has some form of water and wastewater treatment system. This varies from simple outfalls direct to the ocean to very sophisticated activated sludge plants with multiple unit processes dedicated to converting human waste, industrial effluents and storm runoff into clean water discharges and solids acceptable for some form of reuse. inVentures using its gas inFusion technology, has developed the gPRO system for the prevention and remediation of major algae blooms that...

    By inVentures Technologies Incorporated. Distributor in Alexandria, AUSTRALIA.

  • Inspection, Monitoring and Management Technologies for Water Transmission Main Management

    Water transmission mains are buried underground, and therefore often managed using a buried and forgotten approach. However, they are typically the most valuable group of assets utility owns.

    By Pure Technologies - a Xylem brand Office in Pyrmont, AUSTRALIA.

  • Cost effective, real-time pollution monitoring networks

    Ambient air pollution is a continuous problematic since many years, and the various organizations in charge of air quality monitoring work constantly on how to improve their structures and gain the most accurate and reliable data possible. Indeed, the changes in mentality and therefore in urbanism development for example, implies an access to the data faster and at multi-location level. Air quality monitoring reference stations used nowadays measure with an extreme accuracy in located areas, but requires a lot of...

    By ENVEA Cairpol (ex Environnement S.A) Distributor in AUSTRALIA.

  • Chemical Oxygen Demand (COD) Analyzer for Industrial & Municipal Wastewater Industry

    MANTECH’s game-changing water quality analysis technology is revolutionizing wastewater treatment at industrial and municipal facilities worldwide. The PeCOD Analyzer provides accurate chemical oxygen demand (COD) results and biochemical oxygen demand (BOD) estimates within minutes rather than the hours or days required for standard COD and BOD testing — without the use of dichromate, mercury, acids and other harmful chemicals.

    By MANTECH Inc. Distributor in South Melbourne, AUSTRALIA.

  • Balers and Waste Compactors for Warehouses and Logistics Centers

    Warehouses and distribution centers are often very large, consisting of multiple floors and even multiple buildings. Waste transport and handling can be a huge challenge in these types of environments and the key factor is to organize the waste handling efficiently.

    By Orwak AB Distributor in AUSTRALIA.

  • Environmental monitoring solutions for the department of defense and department of energy (DOD-DOE) industry

    Equipment for free product recovery and groundwater remediation, and air strippers for military bases and other federal facilities. QED Environmental Systems has been a leading manufacturer of air-powered environmental pumps, control equipment and supplies for groundwater remediation, groundwater sampling, landfill leachate and methane condensate pumping since 1982. QED also manufactures high-performance, cost-effective air strippers for groundwater and process water, plus solar-powered, wireless remote data...

  • Produced water management for the oil and gas industry

    A combination of factors in recent years has led to increased attention to water management in the oil and gas industry. Some of these factors include: limited water resources in certain areas, development of water-intensive technologies to better exploit unconventional plays, excessive transportation/disposal costs for water, a changing regulatory environment and a public push for sustainability and conservation relating to water as a resource.

    By Pentair Filtration Solutions, LLC Office in Dandenong South, AUSTRALIA.

  • Pulsar noise testing equipment for entertainment noise industry

    As of April 2008 the entertainment industry is now expected to comply with ‘The Control of Noise at Work Regulations’. Owners and venue operators are now legally obliged to ensure their workforce is protected from excessive noise levels. To help you understand the key issues, Pulsar Instruments Plc have produced a Free Information Pack detailing the new regulations and offering simple advice and answers to the most commonly asked questions.

    By Pulsar Instruments plc Distributor in Tiwi, AUSTRALIA.

  • Variable frequency drive controls AC motors

    Consider integrating a variable frequency drive. It often can optimize energy efficiency by enabling you to match motor speed to the demands of the system. Look for opportunities, for example, to replace throttle valves or dampers used to restrict flow. However, a variable frequency drive may not make sense if the load on the motor is relatively small and constant — because speed changes will occur infrequently and any benefits from varying the speed will be negligible. So, thoroughly assess the system load...

    By Variable Frequency Drives based in NSW, AUSTRALIA.

  • Electrical Based Tomography Systems for Slurry Flow

    Slurry transportation is required in a diverse range of sectors, from food to minerals processing; and oil sands processing to nuclear waste management. As a process it requires significant levels of energy and the abrasive nature of materials used can lead to ongoing issues of pipeline erosion.

    By Industrial Tomography Systems (ITS) Distributor in Mitcham, AUSTRALIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you