Applications in Canada

By SoundPLAN International LLC Distributor in CANADA.

Osmosis is the phenomenon of lower dissolved solids in water passing through a semi-permeable membrane into higher dissolved solids water until a near equilibrium is reached. Reverse Osmosis (RO) is a membrane process of purification which removes most of the the total dissolved solids (TDS) in water by reversing the natural process of osmosis. Pressure is applied to a TDS-concentrated solution against a semi-permeable membrane, causing pure water to diffuse through the membrane. RO has become an important process for a wide variety of applications including: medical, laboratory, desalination, industrial wastewater, Deionized (Dl) pretreatment, and drinking water.

By Myron L Company Distributor in CANADA.

MEGTEC’s experience and application know-how are at your command for tough drying and web handling applications such as slow-drying coatings and materials or thin film coating and laminating. Dryers can be equipped with a wide variety of nozzle configurations ranging from simple slot nozzles to sophisticated Coanda-style air bars and patented air foil systems. A full range of heat sources are available including steam, direct and indirect gas-fired, thermal oil, electric, hot water and IR. In addition, the air handling systems can be integrated into the dryer enclosure or stand-alone for remote installation. When the process requires pollution control systems for solvent-based applications, MEGTEC also offers regenerative thermal oxidizers, solvent recovery, distillation and purification systems. MEGTEC also offers waste heat recovery packages to “close the energy loop” between pollution controls and the process, in order to reduce production costs and increase customer profits

By Babcock & Wilcox MEGTEC LLC Office in Waterloo, ONTARIO (CANADA).

Many industrial and pharmaceutical processes generate wastewater with volatile contaminants that increase the COD and BOD to a point where discharging to municipal wastewater is very costly or not an option. These contaminants can be removed from the water by distillation, substantially lowering the disposal cost, and, in many cases, the removed components can be further purified and reused in the process. MEGTEC offers the following solutions to remove the volatile contaminants and make wastewater suitable for discharge to most municipal wastewater treatment plants: Stripping columns using direct steam or a reboiler Distillation columns using indirect steam heat sources Our technologies have been applied to a range of processes including wastewater treatment from industries such as Pharmaceutical, Semiconductor, Chemical and Petrochemical.

By Babcock & Wilcox MEGTEC LLC Office in Waterloo, ONTARIO (CANADA).

We can treat the air streams from waste management plants, MBT (Mechanical Biological Treatment) reception and composting areas, Waste Water Treatment Plants (WWTP), Refuse Derived Fuel (RDF) Plants, gasification of waste, syngas, torrefaction, gas engines and biogas upgrading. In waste management plants and WWTP, we remove the odors that may be causing a nuisance to neighbors, with bioreactors using Biomass to degrade odorous components and where odors are particularly intractable or VOC emissions higher, thermal oxidizers to meet prescribed emission limits and odor levels. In RDF Plants, Syngas, Gasification, Gas Engine and Biogas Upgrading applications, we employ thermal oxidizers, particulate removal and DeNOX systems, for the control of VOC, NOx, CO and particulates to prescribed emission limits.

By Babcock & Wilcox MEGTEC LLC Office in Waterloo, ONTARIO (CANADA).

MEGTEC is actively involved in providing Power Generation solutions for many applications ranging from utilizing process heat recovery systems to utilization with boilers, to recovering and utilizing Ventilation Air Methane (VAM) from coal mines. MEGTEC has developed VAM processing technologies for either abatement only and in combination with energy recovery and utilization. MEGTEC’s proven technologies are destroying methane while generating high quality carbon credits, electricity for coal mines and heating for local communities and facilities.

By Babcock & Wilcox MEGTEC LLC Office in Waterloo, ONTARIO (CANADA).

We treat air streams to remove odors allowing industrial processes to be operated in compliance with local regulations and without causing a nuisance to neighbors due to odors and smells. Our technologies have been applied to a range of processes including: Waste treatment (municipal and industrial) Manufacture of flavors Food processing Waste water treatment (Municipal and industrial) Chemical manufacture Rendering

By Babcock & Wilcox MEGTEC LLC Office in Waterloo, ONTARIO (CANADA).

In the fast-changing electronics industry with its need for new materials and products, demand for 100% uptime, smooth production operation, many in clean-room environments, MEGTEC meets and exceeds continuous demand for raising the bar of technology excellence. MEGTEC works either directly with the end user or through engineering firms or contractor companies, offering tested package systems as required and our end user list includes most of the well-known manufacturing companies around the globe including producers of ceramic condenser/capacitor, thin film FCCL, solar back film, plasma and LCD screen makers in Asia. We have the breadth of technologies in our portfolio and with our strong engineering design capabilities, collaborate from each of our global facilities and can review your application and recommend the best solution.

By Babcock & Wilcox MEGTEC LLC Office in Waterloo, ONTARIO (CANADA).

By SoundPLAN International LLC Distributor in CANADA.

Peristaltic pumps are proven performers in water and waste treatment solving problems including: Dosing and metering treatment chemicals and reagents including ferric chloride (“Ferric”), sodium hypochlorite (“Hypo”), chlorine water, lime (Kalic or Kalkmilch), caustic soda, powder activated carbon and polymers, sludge transfer, filter press feeds.

By Verderflex Peristaltic Pumps - part of the Verder Group Office in Guelph, ONTARIO (CANADA).

Safely Eliminate Odors Created By Food Processing: Malodors generated by the food processing industry vary enormously since they can be generated in the production, processing, and wastewater treatment areas of the plant. Regardless of the source, all of these odors may be offensive to the public.

By OMI Industries (OMI) Distributor in Anselme, QUEBEC (CANADA).

From process to product, we remove odors from rubber and plastic. Malodors, whether connected to the process or embedded within the end product, are an inherent concern associated with manufacturing polymers. Fortunately, OMI Industries has a versatile solution that’s proven to work within the plastics and rubber industries. Ecosorb odor neutralizing products feature a proprietary, natural and environmentally safe formulation that’s fast acting and effective at removing detrimental polymer odors without the use of masking agents or fragrances.

By OMI Industries (OMI) Distributor in Anselme, QUEBEC (CANADA).

Eliminating industrial odors naturally is our civic duty. To handle the odor control needs of municipal and government agencies, OMI Industries has created MUNI odor neutralizing product. Similar in many ways to its siblings in the Ecosorb products line, Muni odor control product uses Van Der Waals forces to chemically react with malodor molecules to eliminate odors combined with a natural formulation that makes it safe to work with. What’s more, the Muni product is surprisingly economical to use. It was specially developed to meet the tight budget limitations faced by municipalities without skimping on industrial odor control effectiveness.

By OMI Industries (OMI) Distributor in Anselme, QUEBEC (CANADA).

When it comes to odor management, simply cleaning the tank isn’t enough to remove the odors. Prior to cleaning, storage tanks are vented to the atmosphere in order to reduce the internal gas content to a level below its lower explosion limit (LEL). This permits safe worker access. During venting, odors escape into the atmosphere creating a nuisance to nearby residents, businesses, and employees. Furthermore, storage tank cleaning results in production downtime that reduces plant profitability.

By OMI Industries (OMI) Distributor in Anselme, QUEBEC (CANADA).

You refine the fuel, we’ll remove the odors. Oil refineries and petrochemical plants may generate large volumes of odor from the processing and refining of different fuels. Sulfides, mercaptans, and hydrocarbon compounds are all closely related to the oil industry. The odors generated from these industrial compounds are of a high nuisance value and generally create concern among local air boards and the public. Ecosorb odor removal products may be used in a variety of areas around the refinery including water treatment facilities, sludge ponds, sulfur recovery units, and API separators. To remove odors during tank cleaning and maintenance operations, portable dispersion systems can be used in the immediate work area to control malodors. Ecosorb products can be directly injected into flues and stacks and may be used as a substitute scrubbing solution in some applications.

By OMI Industries (OMI) Distributor in Anselme, QUEBEC (CANADA).

Verderflex peristaltic pumps offer optimum performance to the printing and packaging industries. Combining the ability to self prime, run dry and an ultra fast tube changeover these pumps keep downtime to an absolute minimum. Additionally, the combination of the simple tube clamping mechanism and the low tube cost generates savings in by eliminating specialist tools and labour and by costly cleaning cycles.

By Verderflex Peristaltic Pumps - part of the Verder Group Office in Guelph, ONTARIO (CANADA).

Food products such as dairy, baked goods, cereals, beverages and confectionary demand pumps that meet today’s hygiene standards and are able to handle products with care. Peristaltic tube pumps are perfect for sanitary pumping of many foods and liquids. The gentle pumping action works well with shear sensitive products and products that offgas, such as when pumping yeast in brewing beer.

By Verderflex Peristaltic Pumps - part of the Verder Group Office in Guelph, ONTARIO (CANADA).

Verderflex tube pumps provide precision pumping and dispensing solutions for the pharmaceutical industry. The pumps range from simple manually variable pumps to versatile units with sophisticated dispensing profiles programs. Capable of speed, accuracy and the easy to use pump range are perfect for dispensing delicate, viscous, corrosive, shear sensitive or abrasive fluids.

By Verderflex Peristaltic Pumps - part of the Verder Group Office in Guelph, ONTARIO (CANADA).

A large selection of panel mounted pumps and pump heads for use in Original Equipment Manufacture (OEM). These pumps are custom engineered to integrate within your own equipment whenever accurate and repeatable dosing or liquid transfer is a must. Pumps can be supplied with a range of power options including both A.C or D.C. motors.

By Verderflex Peristaltic Pumps - part of the Verder Group Office in Guelph, ONTARIO (CANADA).

With predefined formulas or concentration tables the density meter converts the measured density value automatically into the desired concentration unit. The density meters from Mettler Toledo have already built in formulas and concentration tables for the most common applications.

By Mettler - Toledo Int. Inc Distributor in Edmonton, Alberta, ALBERTA (CANADA).