Applications in Cyprus

  • Premium

    International testing for biofuels

    Sustainable use of biofuels requires reliable and precise analytical methods throughout – from the choice of raw materials through to process optimization and on to the compliant final product. As a leading manufacturer of instruments for chemical analysis, we are quite aware of these challenges.

    By Metrohm AG Distributor in Latsia, CYPRUS.

  • Premium

    Bromate analysis for the drinking water industry

    Bromate forms during the ozonization of drinking water. Several international standards stipulate detection limits and test methods. Conductivity detection with chemical suppression allows the determination of bromate in the lower μg/L range. In the ng/L range, bromate can be detected by IC/MS coupling or post-column derivatization with potassium iodide and subsequent UV detection.

    By Metrohm AG Distributor in Latsia, CYPRUS.

  • Premium

    Chemical analysis for the pharmaceutical industry

    Apart from complying with numerous official guidelines, Metrohm instruments and applications satisfy the test methods for quality control and product release that are listed in the most important pharmacopoeias.

    By Metrohm AG Distributor in Latsia, CYPRUS.

  • Premium

    Meteorological monitoring

    A range of traditional manually read instrumentation for the measurement of surface meteorological parameters.

    By Casella Distributor in Nicosia, CYPRUS.

  • Premium

    Precipitation measurement

    From simple manual rainfall collection devices, electronic tipping bucket rain gauge sensors, through to fully autonomic stand alone data logging systems with telemetry for hydrological network applications.

    By Casella Distributor in Nicosia, CYPRUS.

  • Premium

    Sound level measurement for safety regulations

    Hand held instruments for the measurement of an employee`s noise exposure. Frequency analysis within Sound Level Meters can also be used to determine the correct selection of hearing protection.

    By Casella Distributor in Nicosia, CYPRUS.

  • Premium

    Compressed air, gas and vacuum solutions for biogas/biomethane

    Customers benefit from the extensive know-how that AERZEN has gained from decades of experience in the chemical and petrochemical industry. The use of biogas as an energy source will considerably help achieve the environmental objectives set nationally and internationally; be that reducing reliance on nuclear energy or the reduction of CO2 emissions.

    By Aerzener Maschinenfabrik GmbH Office in Nicosia, CYPRUS.

  • Premium

    Compressed air, gas and vacuum solutions for water and waste water treatment

    There are many options to apply methods to avoid damaging the environment. In the case of wastewater e.g. the ventilation of the sediment tank or the pressure ventilation of biological wastewater treatment systems. The oxygen introduction is important, for deep wastewater tanks, wastewater treatment systems with standard aeration tanks or natural clarification ponds alike. If the wastewater has already entered the natural cycle, ventilating lakes and rivers prevents additional contamination. When treating drinking water, rinsing the filters with compressed air ensures that perfect water is provided and natural water reserves are not used excessively.

    By Aerzener Maschinenfabrik GmbH Office in Nicosia, CYPRUS.

  • Premium

    Long term noise measurement for safety consulting

    Where unattended monitoring for longer periods is required to obtain more detailed information of the noise climate. Equipment is protected from the weather and powered for longer periods with options to remotely download data.

    By Casella Distributor in Nicosia, CYPRUS.

  • Premium

    Personal air sampling

    Bodily worn equipment and associated accessories and sampling media for undertaking personal air samples onto media which is then further analysed. Used for measuring employees` exposure to dusts, fumes, gases or vapours

    By Casella Distributor in Nicosia, CYPRUS.

  • Premium

    Air sampling for emergencies

    Deployable battery operated monitoring systems for measurement of dusts (PM10, PM2.5), gases and vapours. Generally used for measurements of site boundaries or chemical incidents

    By Casella Distributor in Nicosia, CYPRUS.

  • Premium

    Short term noise measurement for safety consulting

    For environmental noise monitoring when short measurements are required using a hand held Sound Level Meter. This could be for boundary monitoring of industrial sites or noise surveys for planning purposes.

    By Casella Distributor in Nicosia, CYPRUS.

  • Premium

    pH value and conductivity measurement for power plants

    The pH value and the conductivity have to be determined quasi-continuously at numerous locations in a power plant. The pH value is a key parameter to control the amount of lithium hydroxide that has to be added to the primary circuit of a pressurized water reactor; in water steam circuits, the pH value controls the amount of added amines. The conductivity indicates the amount of dissolved minerals. It is a measure of the water purity and is one of the most important parameters for any chemical control program in a power plant. It is determined at numerous sampling points in the power plant, for example, in the cooling water circuit, in feed and makeup water, at the outlet of the condensate pump, and in the primary circuit of a pressurized water reactor.

    By Metrohm AG Distributor in Latsia, CYPRUS.

  • Premium

    Gas suction in landfills

    By Aerzener Maschinenfabrik GmbH Office in Nicosia, CYPRUS.

  • Premium

    RoHS analysis in electronic equipment

    The RoHS directive stipulates maximum limits for various hazardous substances in electrical and electronic equipment. Meeting the RoHS Directive requires reliable equipment and methods. As a leading manufacturer of precision instruments for chemical analysis, we are aware of these challenges.  For this reason, Metrohm offers you not only the most advanced equipment, but rather complete solutions for the particular tasks at hand.

    By Metrohm AG Distributor in Latsia, CYPRUS.

  • Premium

    ph determination for soil testing

    Determination of the pH value provides information about the acid or base action of the soil solution. This in turn is enormously important for the nutrient supply and microbial activity of the soil. For example, many metals (trace elements) are considerably more mobile in acidic soils. If the soil pH values are very low, toxic levels can soon be reached and these can damage the roots of plants. On the other hand, excessively high pH values quickly lead to a shortage of trace elements because of immobilization.

    By Metrohm AG Distributor in Latsia, CYPRUS.

  • Premium

    Water analysis for municipal wastewater treatment

    Voltammetric determination of many heavy metals is also possible in municipal or industrial wastewater. On account of the usually high organic load the sample is usually mineralized by means of UV digestion. 

    By Metrohm AG Distributor in Latsia, CYPRUS.

  • Premium

    Compressed air, gas and vacuum solutions for marine industry

    Screw compressors, positive displacement blowers and rotary lobe compressors are essential for ships of all sizes with a variety of applications and processes. As specialist for the compression of process air and process gases we understand exactly what you require. Thanks to 150 years of experiences in development and manufacture of blowers and compressors, AERZEN always provides you with the product solution you need.

    By Aerzener Maschinenfabrik GmbH Office in Nicosia, CYPRUS.

  • Premium

    Noise monitoring for workplaces

    Measurement of the noise exposure of an individual over the working day. They should be used for mobile workforces where it is not always practical to measure with a hand held Sound Level Meter.

    By Casella Distributor in Nicosia, CYPRUS.

  • Premium

    Air quality monitoring

    To estimate the effects of aerosols on health and climate, it is essential to know their chemical composition. Sampling is done using two different types of aerosol collector. The first type are filter collectors that are based on the deposition of suspended particles on surfaces; the second type are powerful aerosol collectors.

    By Metrohm AG Distributor in Latsia, CYPRUS.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you