Applications in Egypt

  • Premium

    Noise modeling for noise consulting

    Noise planning that supports many governments and engineering associations worldwide. 

    By SoundPLAN International LLC Distributor in Cairo, EGYPT.

  • Premium

    Meteorological monitoring

    A range of traditional manually read instrumentation for the measurement of surface meteorological parameters.

    By Casella Distributor in Cairo, EGYPT.

  • Premium

    Precipitation measurement

    From simple manual rainfall collection devices, electronic tipping bucket rain gauge sensors, through to fully autonomic stand alone data logging systems with telemetry for hydrological network applications.

    By Casella Distributor in Cairo, EGYPT.

  • Premium

    Sound level measurement for safety regulations

    Hand held instruments for the measurement of an employee`s noise exposure. Frequency analysis within Sound Level Meters can also be used to determine the correct selection of hearing protection.

    By Casella Distributor in Cairo, EGYPT.

  • Premium

    Particulate matter, halogens and aerosols

    Without CTP's innovative upstream systems, regenerative thermal oxidation would not be possible, which would render the waste gas purification cost-intensive and inefficient. Continuous burning off in the RTOs eliminates the deposits which periodically clog the ceramic honeycomb blocks.

  • Premium

    Extraction of many emission sources in extensive factory premises

    CTP achieved the continuous and individual ventilation of every work station and overall compliance with statutory limits, as well as the production of usable steam as a by-product of the excess heat.

  • Premium

    Compressed air, gas and vacuum solutions for water and waste water treatment

    There are many options to apply methods to avoid damaging the environment. In the case of wastewater e.g. the ventilation of the sediment tank or the pressure ventilation of biological wastewater treatment systems. The oxygen introduction is important, for deep wastewater tanks, wastewater treatment systems with standard aeration tanks or natural clarification ponds alike. If the wastewater has already entered the natural cycle, ventilating lakes and rivers prevents additional contamination. When treating drinking water, rinsing the filters with compressed air ensures that perfect water is provided and natural water reserves are not used excessively.

    By Aerzener Maschinenfabrik GmbH Office in Cairo, EGYPT.

  • Premium

    BTEX in Ambient Air Application using a High-Sensitivity PID

    The Series 8900 BTEX Analyzer with a high-sensitivity PID provides direct low level measurement of Benzene, Toluene, Ethylbenzene, and Xylene`s in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites.

    By AMETEK MOCON - Baseline Distributor in Thakanat El-Maadi, EGYPT.

  • Premium

    Industrial evaporation of the chemical industry

    In the chemical industry a wide range of applications can be performed with an industrial evaporator

    By BÜCHI Labortechnik AG Distributor in Giza, EGYPT.

  • Premium

    Parallel evaporation in environmental consultancy

    For a fast and effcient sample concentration in order to monitor de pollution of the environment

    By BÜCHI Labortechnik AG Distributor in Giza, EGYPT.

  • Premium

    Laboratory evaporation for pharmaceutical laboratories

    BUCHI offers a variety of reliable solutions for regulated pharmaceutical laboratories

    By BÜCHI Labortechnik AG Distributor in Giza, EGYPT.

  • Premium

    Measurement of methane, methanol and ethanol for the biomass monitoring for biofuels.

    The Series 8900 provides direct measurement of methane, methanol, and ethanol for the biofuel industry. The Series 8900 GC employs a flame ionization detector (FID). The methane, methanol, and ethanol in the gas sample are physically separated using proprietary GC columns. A dual-column configuration with timed backflush to vent is used to strip off moisture and heavier gases. At sample injection, a fixed volume of sample is carried through the pre-cut column. The backflush is timed so that primarily the MME and other similar compounds continue on to the analytical column. Contaminants are then backflushed to vent. Methane, methanol, and ethanol are separated from potentially interfering components on the analytical column and elute to the detector for analysis.

    By AMETEK MOCON - Baseline Distributor in Thakanat El-Maadi, EGYPT.

  • Premium

    Measurement of methyl ethyl ketone, chloroform & carbon tetrachloride in air for remediation & super fund sites

    The Series 8900 Analyzer provides direct measurement of Methyl Ethyl Ketone, Chloroform and Carbon Tetrachloride in ambient air. This instrument is utilized for remediation and Super Fund sites and to monitor workplace exposure limits.

    By AMETEK MOCON - Baseline Distributor in Thakanat El-Maadi, EGYPT.

  • Premium

    Bromate analysis for the drinking water industry

    Bromate forms during the ozonization of drinking water. Several international standards stipulate detection limits and test methods. Conductivity detection with chemical suppression allows the determination of bromate in the lower μg/L range. In the ng/L range, bromate can be detected by IC/MS coupling or post-column derivatization with potassium iodide and subsequent UV detection.

    By Metrohm AG Distributor in Giza, EGYPT.

  • Premium

    Measurement of C1-C5 with carbon dioxide for oil & gas exploration.

    The PetroAlert Model 8900 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing fast analysis of C1-C5 hydrocarbons and Carbon Dioxide required in Mud Logging for Oil & Gas exploration. The PetroAlert Model 8900 uses a dual column configuration with timed backflush to vent which is used to strip off moisture and C6+ hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed sample volume is carried to the pre-cut column. Backflush of the pre-cut column is timed from sample injection so that only C1-C5 hydrocarbons are eluted from the pre-cut column to the analytical column. C6+ hydrocarbons on the pre-cut column are then vented.

    By AMETEK MOCON - Baseline Distributor in Thakanat El-Maadi, EGYPT.

  • Premium

    Laboratory instruments solutions for pharmaceutical industry

    Pharmaceutical analysis guarantees drug safety by providing information on the identity, content, quality, purity, and stability of pharmaceutical products using analytical chemistry. Metrohm offers you a broad range of instruments and applications for quality control and for monitoring and improving drug manufacturing. With myriads of pharmacopeia-compliant analysis methods, we are your qualified partner for all chemical-pharmaceutical analysis issues and analytical method validations. In accordance with international pharmacopeias and various guidelines, Metrohm offers you analysis for active pharmaceutical ingredients (APIs), excipients, impurities, pharmaceutical solutions as well as pharmaceutical starting materials, and finished pharmaceutical products (FPPs). Additionally, we provide numerous wet chemical methods for atline and online process control as well as inline monitoring methods for assuring cost-effective manufacturing processes that satisfy all regulatory demands.

    By Metrohm AG Distributor in Giza, EGYPT.

  • Premium

    Low level measurement of aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring.

    The Series 8900 BTEX Analyzer with a high-sensitivity PID provides direct low level measurement of Benzene, Toluene, Ethylbenzene, and Xylene`s in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites.

    By AMETEK MOCON - Baseline Distributor in Thakanat El-Maadi, EGYPT.

  • Premium

    VOC Abatement for Paint Finishing, Paint Manufacturing and Coating Operations

    Munters designs abatement systems to meet the indivual needs of our customers. Our experience allows Munters to design optimal solutions for any application including automotive paint finishing, aerospace paint finishing and coating industries.

    By Munters Zeol Division Distributor in EGYPT.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you