Applications in Europe

  • Premium

    Hazardous waste treatment solutions for chlorine industry

    The mercury cell process is a formerly widely-used production technique for the production of chlorine and caustic soda. The liquid metal, mercury, acts as cathode (negative pole) in this process. In the past, the loss of mercury during the process (to air, soil and water) led to serious health and environmental problems. Therefore, most European chlorine producers have decided to phase out the mercury cell process by 2020. Nevertheless, even today, almost 6000 tons of mercury is used per year for chlorine production in Europe alone. As a result of this, yearly waste outputs contain around 1200 tons of mercury, which are stored on-site or sent off for disposal.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Seal-Less Chemical Transfer And Metering Pumps

    When pumping hazardous chemicals it is important to use a leak free pump that resists the chemical’s corrosive effects.

    By Verderflex Peristaltic Pumps - part of the Verder Group based in Castleford, UNITED KINGDOM.

  • Premium

    Thermal oxidation for the chemical industry

    By Process Combustion Ltd based in Harrogate, UNITED KINGDOM.

  • Premium

    Gas monitoring instruments and systems for titanium dioxide

    Titanium dioxide is the most important white pigment used in the polymer industry. It is widely used, because it efficiently scatters visible light, thereby imparting whiteness, brightness, and opacity when incorporated into a plastic product.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Water treatment solutions for metering of solids

    If you need to meter powder and granulates with accuracy, ProMinent systems are the right choice. They always store, transport and process solids reliably and precisely thanks to our exacting quality requirements.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Gas analyzers and detectors for the ethanol processing

    Gas chromatographs and hydrocarbon analyzers can be key in adding value to the ethanol production process and protecting the environment from Volatile Organic Compound (VOC)emissions created during the process.

    By AMETEK MOCON - Baseline Distributor in Co. Wicklo, IRELAND.

  • Premium

    Air combustion for chemical plants

    By AEREON Office in Vecchiano (PI), ITALY.

  • Premium

    Intelligent compliance solutions for chemicals, food contact & cosmetics industry

    For manufacturers of chemicals – which can be broadly defined as anything from specialty chemicals to lubricants, plastics and food contact to cosmetics and more - changing market dynamics dictate the need for flexibility in meeting customers` complex requirements for high performance sustainable products and improving supply chain performance. Delivering quality products in record time is critical, as are optimizing business processes across your enterprise and global supply chain.

    By Verisk 3E Office in Copenhagen, DENMARK.

  • Premium

    Pumps for Soap

    While most manufacturers of detergent and soap products are medium size companies mixing various chemicals according to their own recipes, the chemicals are produced by world-wide chemical companies. DESMI is a well-respected supplier of pumps for these applications. Special features and product demands are necessary for being a supplier in this field. DESMI has the products asked for and has a large number of ROTAN® pumps in operation. The ingredients list of for instance liquid hand soap will often be water, Sodium Laureth Sulphate, Sodium Chloride, Ocamide Dea, Glycerin, Cocamidopropyl Betaine, Coco-glucoside, Glycol Disterate, Glycerol Oleate, PEG-7 Glycerol Cocoate, Citric Acid, perfume, Isopropyl Myristate, Glycerol Stereate, Tetrasodium Iminodisuccianate, Methylchloroisothiazolinone, and Benzoic Acid.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Premium

    Electrochemical solutions and water technologies for bleaching chemicals

    Our commitment is the development of modern solutions to ensure competitiveness to our customers, through better performances in terms of energy savings (low oxygen, low cell voltage), product quality and environmental impact of their productions.

  • Premium

    Gas Detection and Analysis Equipment for Chemical and Petrochemical

    In a complex petrochemical facility there may be many thousands of potential leaks paths. Some may be leaking but most will not. Using an infrared Gas Detection camera allows the user to examine many potential leaks sources in a short time and from a distance. The EPA acknowledged gas imaging cameras, such as Opgal’s EyeCGas®, as an approved Leak Detection and Repair (LDAR) Method 21 alternate work practice (AWP).

    By Opgal Optronic Industries Ltd. Distributor in Neu Isenburg, GERMANY.

  • Premium

    Water treatment solutions for metering of fluids

    We transport chemicals with ease in any industrial environment: ProMinent solutions store, transfer and meter substances at rates of 0.1 l/h to 40,000 l/h at a pressure of 2 to 3,000 bar.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Chemical Water Treatment for process chemicals

    Kurita Water Solutions provides oil refineries and petrochemical plants with all the chemical additives used directly in the process, to fight the problems caused by the composition of the crude oil and the intermediate products. In oil refineries and petrochemical plants the goal is to improve efficiency and to optimise the production capacity.

    By Kurita Office in Limonest, FRANCE.

  • Premium

    Industrial air pollution control for the chemical and petrochemical industry

    CTP systems can be found in every leading production company: thanks to the experience and the expertise developed in partnership with our customers for processes with inconsistent waste gas volumes; varying concentrations of organic components; gases contaminated with aerosols. CTP has installed systems for waste gas streams ranging from 1,000 to 200,000 Nm³/h. CTP supplies this industry with mainly catalytic systems, regenerative thermal oxidisers (RTO) and adsorbers. As the flue gases in this industry are often explosive mixtures, CTP systems have to be completed with special safety conduits and filters to help reduce hazards during continued operation.

  • Premium

    Compressed air, gas and vacuum solutions for chemical- and process technology

    The chemical industry is completely dependent on reliable supplies of process gas. But each process is different and requires specialized machines. The solution: the efficient compressors and blowers from AERZEN – proven in numerous operating environments, suited for almost all media, unrivalled in their reliability, and adaptable to individual client specifications. Can the solution really be this easy? It can! The EU directives for explosion protection play an important role, among others, in the chemical industry. AERZEN always offers suitable solutions with its products.

    By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.

  • Premium

    Particle Filtration for the Biotechnology / Chemical Industry

    In chemical and biotechnological applications, we use our ceramic membranes successfully for protein concentration, cell separation, recovery of catalysts, filtration of dyestuffs, and more.

    By atech innovations gmbh based in Gladbeck, GERMANY.

  • Premium

    Pumps for Oil Blending

    Operations like oil blending, additive mixing and filling of the finish lube oils are fully automatic batching processes, performed within parallel lines, each consisting of one blender and one weigh hopper. The process requires quality pumps – and around the world DESMI has been a reliable partner for many years as our ROTAN® GP and HD series are designed for giving an accurate and constant flow to support this process. Our stainless steel pump, ROTAN® CD, is also frequently used when special additives demand a higher material standard to give the best possible life cycle cost solution. Keeping the weight ratios of the lube oil components is ensured by their precise weighing and is program-controlled by remote opening and closing of dedicated valves. Basic feeds to the blending process are the base lube oil stocks.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Premium

    Water treatment chemicals for the chemical and pharmaceutical industry

    Resource consumption in the chemical industry is enormous. Although the industry has already succeeded in significantly reducing its energy demands, it remains challenged by high energy costs, high water consumption and increasingly stringent regulations. Energy efficiency, increased production and plant availability are therefore important factors contributing to a competitive advantage. We would be glad to support you. Kurita offers a broad spectrum of resource-saving solutions as well as solutions for improving production and plant safety.

    By Kurita Office in Limonest, FRANCE.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you