Applications in Europe

  • Premium

    Panel mounted OEM pumps

    A large selection of panel mounted pumps and pump heads for use in Original Equipment Manufacture (OEM). These pumps are custom engineered to integrate within your own equipment whenever accurate and repeatable dosing or liquid transfer is a must. Pumps can be supplied with a range of power options including both A.C or D.C. motors.

    By Verderflex Peristaltic Pumps - part of the Verder Group based in Castleford, UNITED KINGDOM.

  • Premium

    Air pollution control for the rubber curing industry

    One-time, on-site final destruction of particulates. This is the key benefit gained from an Anguil solution to the emissions generated by the rubber curing process. Other advantages of an Anguil solution include the elimination of visible blue haze, guaranteed destruction efficiency compliance, and the elimination of costly mechanical filtration media and the lingering liability issue associated with filter disposal.

    By Anguil Environmental Systems, Inc. Distributor in UNITED KINGDOM.

  • Premium

    Gas monitoring for the manufacturing industry

    By Teledyne API Distributor in UNITED KINGDOM.

  • Premium

    Fluoride emissions monitoring in aluminum smelters

    Production of aluminum from its ores at aluminum smelters results in carbon dioxide CO2, carbon monoxide CO, sulfur dioxide SO2, and hydrogen fluoride HF gas emissions during the electrolytic process phase to the atmosphere. The gas emissions need to be monitored. Typically the smelters have emission limit values (ELVs) for sulfur dioxide and hydrogen fluoride emissions. These emissions should be measured accurately and with good precision, to ensure the smelter does not exceed its emission limit values. In addition several fluoride compounds may be produced in the electrolytic bath in the event of an oxygen shortage. These compounds include carbon tetrafluoride CF4, hexafluoroethane C2F6, sulfur hexafluoride SF6, and silicon tetrafluoride SiF4. These additional emission components are problematic, as they have high Global Warming Potential (GWP) values. The GWP is a relative measure designed to demonstrate how much heat a greenhouse gas (GHG) traps in the atmosphere. Emission of one kilogram of carbon tetrafluoride into the atmosphere today has the potential of heating the atmosphere as much as 7,000 kilograms of carbon dioxide over the next 100 years.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Geotextiles solutions for tunnel construction areas

    Quicker, easier, safer transportation means are required.  Depending on geographical zones, tunnels can be a must to reach your final destination easily. Decades of experience in tunnel constructions with TenCate Polyfelt P have shown that protection geotextiles replaces the need for drainage material around the tunnel lining.

    By TenCate Geosynthetics Netherlands bv based in AE in Nijverdal, NETHERLANDS.

  • Premium

    Chemical Water Treatment for equipment & engineering

    Equipment and Engineering offers the right solution for your application of Kurita Products. Starting from simple dosing pumps up to specific dosing systems for special applications Kurita provides you the right solution for your application. Moreover Kurita offers also monitoring and control equipment to analyze that the right concentration of your Kurita products is being used in your system. Further Kurita provides specific equipment to follow the KPIs of your system, so you can be sure that the expected treatment effect is achieved.

    By Kurita Office in Sant Cugat del Vallés, SPAIN.

  • Premium

    Peristaltic pumps and fluid path technologies for ceramics

    All types of ceramics from fine china to brick manufacture use materials which are extremely hard on pumps. The daily wear on plant and the cost of rejected product can be enormous, and the constant need for manufacturers to drive down costs make savings in these areas vital.

    By Watson-Marlow Fluid Technology Group based in Falmouth, UNITED KINGDOM.

  • Premium

    Chemiluminescense based analyzer for industrial applications

    Whether combustion, waste incineration or power plant, most of the hot processes call for a measurement of the exhaust gas direct at the source by national laws and international standards. No matter where and at what concentrations nitrogen oxides have to be detected, you can depend on ECO PHYSICS analyzers to handle the job quickly, reliably and with a precision that is unmatched anywhere in the world. Whether at trace levels in a clean room environment or for the analysis of exhaust gases directly at the source, you will find the type of chemiluminescence detector (CLD) to perfectly suit you at ECO PHYSICS.

    By ECO PHYSICS AG based in Duernten, SWITZERLAND.

  • Premium

    Practical solutions for practical situations

    All customers have their own individual requirements and specific general conditions. So our experts use their extensive engineering skills and work closely with the customer to develop the right solution every time. This produces a wealth of different applications, which have been used in numerous projects around the globe over the last five decades. With a clear structure of "problem – solution – result", our references from various industries worldwide provide a good starting point and assistance.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Water treatment solutions for zoos industry

    Crystal-clear water in zoos and aquariums. Fresh water = marine animals and sea dwellers full of energy. By reliably treating salt water and fresh water, ProMaqua technology creates the optimum conditions for sharks, polar bears, turtles and other marine animals.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Monitoring solutions for the marine industry

    While land-based industry has been subject to strenuous emissions regulations over the past decades, air emissions from sea-going ships’ machinery has so far been largely unregulated. As a result, according to EU statistics, ships have become the single biggest source of sulphur dioxide (SO2) within the EU. The US EPA (US Environmental Protection Agency) reports similar findings, i.e., that the proportion of air pollutants released which can be attributed to the shipping industry is increasing. MARPOL Annex VI aims to reduce emissions from ships through international regulations, which hopefully will discourage states from enacting unilateral regulations problematic to the shipping industry.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Peristaltic pumps and fluid path technologies for industrial sector

    Watson-Marlow products are engineered to meet the process needs of industrial fluid pumping in a broad range of industries. Watson-Marlow peristaltic pumps have no valves, seals or glands, and the fluid only comes into contact with the bore of the hose or tube ensuring that safe containment and no contamination of the pump or the process fluid.

    By Watson-Marlow Fluid Technology Group based in Falmouth, UNITED KINGDOM.

  • Premium

    Peristaltic pumps and fluid path technologies for engineering

    Watson-Marlow positive displacement pumps provide reliable and low cost transfer of fluids for the widest range of equipment and plant applications.

    By Watson-Marlow Fluid Technology Group based in Falmouth, UNITED KINGDOM.

  • Premium

    Water treatment chemicals for the manufacturing industry

    In all industrial sectors, productivity and economic efficiency are the main factors for sustainable success. Reliable and durable production plants together with their cooling, boiler and waste water systems therefore play an important role. For more than 60 years, Kurita has specialized in water and process treatment. Our 5,200 employees work on behalf of our customers worldwide in a variety of industrial fields. Our individual treatment concepts and competent service help ensure the safe and economical operation of their facilities.

    By Kurita Office in Sant Cugat del Vallés, SPAIN.

  • Premium

    Weather monitoring for manufacturing industries

    By RainWise Inc. Distributor in Morecambe, UNITED KINGDOM.

  • Premium

    Recycling equipment for industrial rubber shredding & recycling

    Granutech Saturn Systems has over 40 years’ experience designing and manufacturing world-class shredders for industrial rubber scrap. We have consistently been in the forefront of developing machinery to provide high quality rubber crumb from rubber and tire scrap. Whether your application is processing remainders from rubber molding, shredding rubber scrap or shredding tires, we have the expertise to design a custom solution that meets your exact application and processing requirements.

    By Granutech-Saturn Systems Distributor in UNITED KINGDOM.

  • Premium

    Tunnel solutions for the tunnel air flow

    Tunnel ventilation systems are designed to enable a sufficient throughput of air to be maintained to ensure a safe operating environment for users. These systems consume large amounts of power and need to be operated as efficiently as possible. To do this it is necessary to know the effectiveness of the system in terms of air flow and direction developed within the tunnel. The TunnelTech 301 is a single point ultrasonic flow monitor that is unaffected by traffic flow and sound reflections. It is designed to withstand the harsh tunnel environment and has a working range of 0-20 metres/second in both directions.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Compressed air, gas and vacuum solutions for marine industry

    Screw compressors, positive displacement blowers and rotary lobe compressors are essential for ships of all sizes with a variety of applications and processes. As specialist for the compression of process air and process gases we understand exactly what you require. Thanks to 150 years of experiences in development and manufacture of blowers and compressors, AERZEN always provides you with the product solution you need.

    By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.

  • Premium

    Electrochemical solutions and water technologies for corrosion prevention

    Today, many man-made structures using steel face harsh futures from the ravages of their natural enemy-corrosion. The cost of corrosion has proven to be almost incalculable as it shortens the life of almost any structure using steel. De Nora’s cathodic protection anodes, marketed under the trade names of LIDA® and ELGARD®, provide customers with a solution to this problem.

  • Premium

    Water treatment solutions for hotels and resorts industry

    Check in for the best water quality. Your objective: Satisfied guests and optimum utilisation. Our contribution: Crystal-clear pool water and hygienically pure potable water. We supply efficient all-inclusive solutions for any size of hotel and any specific requirement - worldwide.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you