Applications in Europe

  • Premium

    Hazardous waste treatment solutions for metal industry

    Sludge by-products from the metalworking industry have a high potential for recycling. Prolonged grinding processes can generate large amounts of highly valuable, alloy-rich sludge; consisting of metal powder and cooling lubricants. Inside our VacuDry system, the thermal separation of the liquids (hydrocarbons, eventually water) and solids (metal powder) takes place in an oxygen free atmosphere. This absence of oxygen ultimately eliminates material degradation by oxidation, and self-ignition or explosion risks. Operation under a low vacuum ensures the possibility to recover the cooling lubricants for later reuse. After the thermal treatment, for appropriate handling in the melting process, the metal powder is pressed into briquettes. With the econ VacuDry technology, 100% recycling of all ingredients is possible.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Air pollution control for the metal decorating industry

    Environmental regulations for air pollution cotrol at metal decorating and packaging facilities usually address can makers, base coil coaters, or metal parts and packaging manufacturers. Metal Decorating can be classified as any process where metal is formed painted, or coated. Metal Packaging is generally considered processes involved in the production of aluminum cans, light metal containers, closures and components.

    By Anguil Environmental Systems, Inc. Distributor in UNITED KINGDOM.

  • Premium

    Air pollution control for the coating industry

    Whether you are flow coating miniblinds, magnetic tape, aluminum cans, coils, wire or paper, Anguil`s 35 years of pollution control experience has provided unique insight into the wide variety of applications in the coating industry. Anguil`s experience leads directly to savings for our customers. Determining your solution begins by quantifying the problem with a thorough assessment of your emissions. Utilizing proven principles of design engineering, your system will evolve to incorporate air volume reduction strategies to reduce system size, meaning a reduction in both capital and operating costs. This can be achieved by recirculating the air in drying ovens or by cascading areas of lower VOC concentration to areas of higher VOC concentration.

    By Anguil Environmental Systems, Inc. Distributor in UNITED KINGDOM.

  • Premium

    Metal Sludge Plants for Oil and Metal Industry

    Grinding-swarf from the metal processing industry may contain metal alloys, stainless-steel and high-alloyed steel, all of which are ideal input-materials VacuDry unit. The absence of oxygen in the VacuDry process prevents any changes in the chemical structure of the oil, emulsions or metals during the treatment. The output material can later be sold at high prices.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Odor control for metal casting

    Use Ecosorb products to remove foundry smells naturally. Ecosorb odor control products by OMI Industries are extremely effective at breaking down and eliminating the many odorous gases produced by the metalcasting process. They chemically convert foul and potentially harmful gases into non-odorous byproducts. Within the metalcasting industry, Ecosorb products are effective on amines, sulfur dioxide, phenols, formaldehyde, ammonia, partially burnt hydrocarbons solvent odors and more.

    By OMI Industries (OMI) Distributor in Vienna, AUSTRIA.

  • Premium

    Recycling equipments for ferrous scrap metal shredding & recycling

    Ferrous scrap metal includes metals that can be reclaimed for use through traditional ferrous scrap recovery systems. These metals include a wide variety of light ferrous scrap such as sheet steel, 55 gallon drums, white goods, and other forms of loose tin. Heavier ferrous scrap can be processed through the Saturn hammermill line of shredders which also produce a more consistent, higher density shred. Shredders prepare the metals for further separation or directly to end ferrous scrap consumers. Additional Granutech machinery such as the MAC Magnum Logger, or MAC Big MAC auto crusher can compact and densify larger ferrous items reducing transportation costs.

    By Granutech-Saturn Systems Distributor in UNITED KINGDOM.

  • Premium

    Recycling equipments for shredding scrap metals

    Scrap metal includes metals that can be reclaimed for use in manufacturing, processed for re-melting or prepared for disposal in landfills. These metals include industrial scrap metal and remainders, electronic scrap, aluminum and precious metals. Shredders prepare the metals for bailing and bundling, saving storage space, transportation and disposal costs. Quad shaft shredders reduce and separate electronic scrap and prototypes in one process, allowing for the recovery of precious metals. Dual or quad shaft shredders break bales or briquettes of pre-processed metal scrap for final size reduction and separation for reclamation or re-melting, allowing for recovery and reuse of the metals. Integrated systems include grinders and hammer mills for producing small size or powdered materials for reuse.

    By Granutech-Saturn Systems Distributor in UNITED KINGDOM.

  • Premium

    Metal swarf shredding for the metal industry

    In metal-working shops utilising swarf-producing manufacturing techniques, the generated swarf is often an underestimated cost factor.

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY.

  • Premium

    Recycling equipments for non-ferrous scrap metal shredding & recycling

    Non-Ferrous Metal Recycling is a large industry focusing on the recovery of metals such as aluminum, brass, copper, and even precious metals from electronic scrap. The applications and needs of non ferrous metal recyclers vary greatly. These can include a large corporate recycler buying UBC bales for shredding to be converted back into beverage cans or a small recycler who is recovering precious metals from circuit boards or catalytic converters.

    By Granutech-Saturn Systems Distributor in UNITED KINGDOM.

  • Premium

    Industrial air pollution control for the metals and mining

    Since mankind`s early beginnings, mining, metallurgy and the subsequent processing of natural resources have evolved into one of the most significant industries. Known as `heavy-industry`, this branch plays an important economic role in most countries. The scope of applications for CTP systems ranges from the mining of natural resources (e.g. bauxite and gold-ore mining), through the production of acetylene gas from coal and calcium carbonate, to the aluminium and steel industry and their foundries.

  • Premium

    Briquetting of Copper

    RUF Briquetting Systems for copper with throughput rates between 50 - 4,800 kg/hr.

    By Ruf Maschinenbau GmbH & Co. KG based in Zaisertshofen, GERMANY.

  • Premium

    Recycling Solutions for the metals industry

    ANDRITZ METALS – highest quality in metalforming technology. Complete lines for the production and further processing of cold-rolled carbon steel, stainless steel, and non-ferrous metal strip. ANDRITZ METALS provides solutions for lines to produce steel and other metal strips. These lines consist of equipment for pickling, cold rolling, annealing, heat treatment, strip coating and finishing, and for pickling acid regeneration. Additionally, ANDRITZ METALS supplies turnkey industrial furnace systems for thermal processes, such as heat treatment of slabs and forged pieces, as well as refining furnaces for the copper industry. ANDRITZ METALS furthermore supplies presses for punching and deep drawing.

    By ANDRITZ MeWa GmbH based in Gechingen, GERMANY.

  • Premium

    Emission Monitoring for the Metal Industry

    The metal industry comprises a large variety of different branches, beginning with metal winning and recovery, metallurgy, metalworking and extending to manufacture of machines and devices for which metal finishing and electroplating are indispensable process steps for quality standards. These industries face the difficulties of improved process control and lower environmental stress. AppliTek implements on-line monitoring in specific processes of the metal industry to increase process efficiency and lower emissions to air.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Process instrumentation and analytics solutions for metals industry

    Continuous monitoring of HF concentration in aluminum smelters is a key issue for optimization of aluminum production.  Continuous gas analyzers support the steel industry by helping facilities optimize processes and reduce expenses.

    By Siemens Industry, Inc. - Process Analytics Office in Tres Cantos, SPAIN.

  • Premium

    Emissions Monitoring for Steel Mills

    Steel mills include a multitude of activities that generate gaseous emissions. Besides continuous emissions stack monitoring, the applications in a steel mill also include process mesaurements that provides important data to the operators in order to optimize the steel making process.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Air Pollution Control for Metal Finishing

    ERG`s purpose-designed scrubbing systems are engineered to suit each application and client`s requirements.

    By ERG (Air Pollution Control) Ltd based in Horsham, UNITED KINGDOM.

  • Premium

    Briquetting of Cast-iron

    Throughput: 30 to 3,000 kg/hr

    By Ruf Maschinenbau GmbH & Co. KG based in Zaisertshofen, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you