Applications in Europe
-
Premium
Water quality monitoring for textile industry
Wastewater from a textile facility contains a variety of dyes and organic chemicals from the manufacturing processes that are often difficult to treat. Spectral analysis is well suited for monitoring waste streams to identify problematic dyes prior to treatment. Continuous monitoring of effluent wastewater for BOD and COD helps to ensure effective treatment and quality of effluent to ensure regulatory goals are met prior to ...
By Real Tech Inc. Office in , FRANCE.
-
Premium
Wastewater treatment solutions for textile industry
The Textile industry is a water intensive industry. Rising water costs due to increasing water scarcity and more stringent environmental regulations have lead to textile companies globally to seek advanced, innovative and efficient textile wastewater treatment solutions to assist them to reduce their water footprint, decrease operational cost and maintain regulatory compliance. Therefore, sustainable water quality management and conservation through water reuse strategies are increasingly becoming critical to the ...
By Genesis Water Technologies, Inc. Distributor in London, UNITED KINGDOM.
-
Premium
Wastewater treatment for the textile industry
A reduction in the Biochemical Oxygen Demand BOD5, produced in the bleaching, washing and dying processes for ...
By Toro Equipment S.L. Distributor in , CYPRUS.
-
Premium
Water Testing for Textile Manufacturing
The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before ...
By Myron L Company Distributor in , UNITED KINGDOM.
-
Premium
Compressed air and industrial gases solutions for textile industry
Energy savings solutions in the Textile industry. In almost all stages of the manufacturing process, compressed air is required in textile factories to create those beautiful and colourful fabrics. Especially in the cotton textile industry with air-jet looms, as well as in the polyester yarn industry, large volumes of air are required. The compressed air consumption in the textile industry is increasing due to modernisation of the production process. It is used in almost all machines for both operations as ...
By VPInstruments Office in Braintree, UNITED KINGDOM.
-
Premium
Water and Wastewater Treatment Systems for Textile
Textile industries are water-intensive and large amounts of water are used in textile manufacturing processes. Almost all dyes and chemicals are applied to textiles in water baths. Preparation steps such as desizing, washing, bleaching and mercerizing generally use aqueous systems. The importance of water in textiles is noted by the textile industries in India and China, their use of local water supply, and the mixing of untreated wastewater, which is composed of fats, oils, colors and other chemicals added in a ...
By Zetaş Kimya based in Ostim OSB/Yenimahalle, TURKEY.
-
Environmental technology for textile finishing industry
The mercerisation of cotton materials yields large quantities of weak caustic soda. Recovery of mercerising lye by means of our Körting evaporation technology developed specially for this process results in an immense saving of costs and a minimised impact on the environment. When combined with a specially co-ordinated lye cleaning system the result is a nearly 100% recovery of ...
By Körting Hannover AG Distributor in Hannover, AUSTRIA.
-
Cleaners for Textiles industry
There are many cleaning applications in textile manufacturing and industrial textile laundering. In textile factories, manufacturing equipment, accessories, water recycling system filters, and wastewater filters must all be cleaned and maintained in order to keep the plant running efficiently. Minimizing downtime, by using the safest, most economical and environmentally friendly products that clean effectively, is critical. Returning filter system flux rates back to 100% is also important and can be accomplished ...
By International Products Corporation Office in London, UNITED KINGDOM.
-
Plastics & textile shredding
SSI manufactures a variety of low-speed, high-torque 1, 2 and 4-shaft shredders specially suited for size reduction of plastics and textiles. SSI has many shredders installed in plastic processing applications ahead of granulators to downsize bulky, difficult to manage or compressible materials before additional processing and recycling. We also have many shredders employed converting plastic materials into usable fuel sources for ...
By SSI Shredding Systems, Inc. Distributor in , UNITED KINGDOM.
-
Filter for Nylon Yarn Texturizing Emissions
PROCESS INFORMATION: In the production of Nylon filaments, polymer is melted and then pumped through a sand filter to a spinnerette. The filaments formed by the spinerette are cooled and solidified by air, before going to a humidifying chamber to stabilise the length of the spun polymer. The yarn filaments are then lubricated by a finishing agent and then stretched or ‘drawn’ to a desired diameter before being wound onto a ...
By Begg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM.
-
Grinder applications for Textile
Cotton, wool, industrial textile waste, rags, ...
By ITS - Shredding & Grinding Solutions based in Cesano Boscone (MI), ITALY.
-
Shredder applications for Textile, carpets, NWT
Cotton, wool, industrial textile waste, rags, ...
By ITS - Shredding & Grinding Solutions based in Cesano Boscone (MI), ITALY.
-
Dissolved air flotation systems solutions for textile industry
Dissolved air flotation systems solutions for textile ...
By SIGMADAF Clarifiers S.L - Wastewater Solutions Distributor in Vila Nova de Gaia, PORTUGAL.
-
Evaporating and drying equipments for textile sludge applications
The main process units include: industrial park sewage treatment, pending sludge drying reduction, dry sludge Utilization of blending by thermal power plant, industrial park production heat supply, dryer heat source recycle and reuse as well as other process, which formed an industrial chain that has the characteristics of circular economy and can be replicated and promoted, known as Sludge Treatment Demonstration Base in FOSHAN city. This project was rated as "Excellent Case of Chinese Sludge Treatment and ...
By Guangzhou Shincci Energy Equipment Co., Ltd. Office in Lesna , POLAND.
-
Water and wastewater treatment solutions for textile industry
The manufacture of textile products and concordantly, the textile product waste water rapidly increases and this situation contributes to the pollution having industrial sources in the world. ...
By Guven Aritma Muh. Tic. Ltd. Sti based in İzmit/Kocaeli, TURKEY.
-
Quality Management Software solutions for technical textiles industryt
Get rid of Excel and manual work. Automate and integrate everything within a week to save time and reduce waste. A smart solution for the smart ...
By AlisQI B.V. Office in Copenhagen, DENMARK.
-
Biomedical waste sterilization solutions for textile sector
Autoclave is used in the fixation process in the textile industry. The fixation process is carried out to increase the quality of the yarn raw material used in the textile industry with the effect of steam pressure and temperature. By removing the deformation effects in the yarn raw material, quality problems in the ongoing stages are eliminated. After the autoclave process, the yarn raw material becomes smooth and tough and ensures high quality products in the next ...
By ReCap based in Odunpazarı, TURKEY.
-
Shredding solutions for textile and carpets industry
All those textile materials (derived from natural or synthetic fibers) arrived at the end of the cycle, carpeting and rugs are shredded and used inside the mix of materials composing the RDF or SRF. The operation can be carried out in two or in one single stage. A two-stage process (volume reduction with two-shaft shredders and subsequent refinement of the final size of the material with single-, three- or four-shaft shredders) will grant a higher production and energy saving (in proportion) while, if processed ...
By SatrindTech Srl based in Arluno, ITALY.
-
Stack gas analysis for mineral wool plants
By Instrumatic aps based in Ry, DENMARK.
-
Chemical solutions for resins: textile and leather industry
Derypol, with more than 50 years of experience manufacturing resins and polymers, has the technology and experience necessary to develop products with applications in very diverse markets, such as textiles, tanning, construction, ...
By Derypol, S.A. based in Barcelona, SPAIN.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you