Applications in Pakistan

  • Premium

    BTEX in Ambient Air Application using a High-Sensitivity PID

    The Series 8900 BTEX Analyzer with a high-sensitivity PID provides direct low level measurement of Benzene, Toluene, Ethylbenzene, and Xylene`s in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites.

    By MOCON, Inc. - Baseline - AMETEK Distributor in Lahore, PAKISTAN.

  • Premium

    Weather monitoring for researching

    By RainWise Inc. Distributor in Karachi, PAKISTAN.

  • Premium

    Compressed air, gas and vacuum solutions for biogas/biomethane

    Customers benefit from the extensive know-how that AERZEN has gained from decades of experience in the chemical and petrochemical industry. The use of biogas as an energy source will considerably help achieve the environmental objectives set nationally and internationally; be that reducing reliance on nuclear energy or the reduction of CO2 emissions.

    By Aerzener Maschinenfabrik GmbH Office in Karachi, PAKISTAN.

  • Premium

    Compressed air, gas and vacuum solutions for water and waste water treatment

    There are many options to apply methods to avoid damaging the environment. In the case of wastewater e.g. the ventilation of the sediment tank or the pressure ventilation of biological wastewater treatment systems. The oxygen introduction is important, for deep wastewater tanks, wastewater treatment systems with standard aeration tanks or natural clarification ponds alike. If the wastewater has already entered the natural cycle, ventilating lakes and rivers prevents additional contamination. When treating drinking water, rinsing the filters with compressed air ensures that perfect water is provided and natural water reserves are not used excessively.

    By Aerzener Maschinenfabrik GmbH Office in Karachi, PAKISTAN.

  • Premium

    Measurement of methane, methanol and ethanol for the biomass monitoring for biofuels.

    The Series 8900 provides direct measurement of methane, methanol, and ethanol for the biofuel industry. The Series 8900 GC employs a flame ionization detector (FID). The methane, methanol, and ethanol in the gas sample are physically separated using proprietary GC columns. A dual-column configuration with timed backflush to vent is used to strip off moisture and heavier gases. At sample injection, a fixed volume of sample is carried through the pre-cut column. The backflush is timed so that primarily the MME and other similar compounds continue on to the analytical column. Contaminants are then backflushed to vent. Methane, methanol, and ethanol are separated from potentially interfering components on the analytical column and elute to the detector for analysis.

    By MOCON, Inc. - Baseline - AMETEK Distributor in Lahore, PAKISTAN.

  • Premium

    Measurement of methyl ethyl ketone, chloroform & carbon tetrachloride in air for remediation & super fund sites

    The Series 8900 Analyzer provides direct measurement of Methyl Ethyl Ketone, Chloroform and Carbon Tetrachloride in ambient air. This instrument is utilized for remediation and Super Fund sites and to monitor workplace exposure limits.

    By MOCON, Inc. - Baseline - AMETEK Distributor in Lahore, PAKISTAN.

  • Premium

    International testing for biofuels

    Sustainable use of biofuels requires reliable and precise analytical methods throughout – from the choice of raw materials through to process optimization and on to the compliant final product. As a leading manufacturer of instruments for chemical analysis, we are quite aware of these challenges.

    By Metrohm AG Distributor in Islamabad, PAKISTAN.

  • Premium

    Bromate analysis for the drinking water industry

    Bromate forms during the ozonization of drinking water. Several international standards stipulate detection limits and test methods. Conductivity detection with chemical suppression allows the determination of bromate in the lower μg/L range. In the ng/L range, bromate can be detected by IC/MS coupling or post-column derivatization with potassium iodide and subsequent UV detection.

    By Metrohm AG Distributor in Islamabad, PAKISTAN.

  • Premium

    Measurement of C1-C5 with carbon dioxide for oil & gas exploration.

    The PetroAlert Model 8900 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing fast analysis of C1-C5 hydrocarbons and Carbon Dioxide required in Mud Logging for Oil & Gas exploration. The PetroAlert Model 8900 uses a dual column configuration with timed backflush to vent which is used to strip off moisture and C6+ hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed sample volume is carried to the pre-cut column. Backflush of the pre-cut column is timed from sample injection so that only C1-C5 hydrocarbons are eluted from the pre-cut column to the analytical column. C6+ hydrocarbons on the pre-cut column are then vented.

    By MOCON, Inc. - Baseline - AMETEK Distributor in Lahore, PAKISTAN.

  • Premium

    Laboratory instruments solutions for pharmaceutical industry

    Pharmaceutical analysis guarantees drug safety by providing information on the identity, content, quality, purity, and stability of pharmaceutical products using analytical chemistry. Metrohm offers you a broad range of instruments and applications for quality control and for monitoring and improving drug manufacturing. With myriads of pharmacopeia-compliant analysis methods, we are your qualified partner for all chemical-pharmaceutical analysis issues and analytical method validations. In accordance with international pharmacopeias and various guidelines, Metrohm offers you analysis for active pharmaceutical ingredients (APIs), excipients, impurities, pharmaceutical solutions as well as pharmaceutical starting materials, and finished pharmaceutical products (FPPs). Additionally, we provide numerous wet chemical methods for atline and online process control as well as inline monitoring methods for assuring cost-effective manufacturing processes that satisfy all regulatory demands.

    By Metrohm AG Distributor in Islamabad, PAKISTAN.

  • Premium

    Low level measurement of aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring.

    The Series 8900 BTEX Analyzer with a high-sensitivity PID provides direct low level measurement of Benzene, Toluene, Ethylbenzene, and Xylene`s in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites.

    By MOCON, Inc. - Baseline - AMETEK Distributor in Lahore, PAKISTAN.

  • Premium

    VOC Abatement for Paint Finishing, Paint Manufacturing and Coating Operations

    Munters designs abatement systems to meet the indivual needs of our customers. Our experience allows Munters to design optimal solutions for any application including automotive paint finishing, aerospace paint finishing and coating industries.

    By Munters Zeol Division Distributor in PAKISTAN.

  • Premium

    Gas analyzers and detectors for the ethanol processing

    Gas chromatographs and hydrocarbon analyzers can be key in adding value to the ethanol production process and protecting the environment from Volatile Organic Compound (VOC)emissions created during the process.

    By MOCON, Inc. - Baseline - AMETEK Distributor in Lahore, PAKISTAN.

  • Premium

    Laboratory instruments solutions for surface finishing industry

    The coating and finishing of surfaces using electroplating techniques is a highly sophisticated process. Be it the finishing of metal parts or the coating of printed circuit boards, the quality required in the intermediate and end products is only achieved if the composition of the process baths is right. At the same time, rising costs of raw materials and energy make it absolutely essential to drive production as efficiently as possible. As a leading manufacturer of instruments for chemical analysis we know about the challenges of coating and finishing of surfaces using electroplating techniques. We offer you state-of-the-art instrumentation to control and optimize the quality of your coating processes − both in the laboratory and in the process environment.

    By Metrohm AG Distributor in Islamabad, PAKISTAN.

  • Premium

    RoHS analysis in electronic equipment

    The RoHS directive stipulates maximum limits for various hazardous substances in electrical and electronic equipment. Meeting the RoHS Directive requires reliable equipment and methods. As a leading manufacturer of precision instruments for chemical analysis, we are aware of these challenges.  For this reason, Metrohm offers you not only the most advanced equipment, but rather complete solutions for the particular tasks at hand.

    By Metrohm AG Distributor in Islamabad, PAKISTAN.

  • Premium

    ph determination for soil testing

    Determination of the pH value provides information about the acid or base action of the soil solution. This in turn is enormously important for the nutrient supply and microbial activity of the soil. For example, many metals (trace elements) are considerably more mobile in acidic soils. If the soil pH values are very low, toxic levels can soon be reached and these can damage the roots of plants. On the other hand, excessively high pH values quickly lead to a shortage of trace elements because of immobilization.

    By Metrohm AG Distributor in Islamabad, PAKISTAN.

  • Premium

    Measurement of naphthalene in ambient air to monitor workplace exposure limits & at remediation & Superfund sites

    The Series 8900 Naphthalene Analyzer provides direct measurement of Naphthalene in ambient air. This instrument is utilized in industrial plants to monitor workplace exposure limits and at remediation and Superfund sites. The Series 8900 Naphthalene Analyzer employs a photoionization detector (PID) as the sensing element. A dual column configuration with timed backflush to vent is used to strip off moisture and heavier hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed volume of sample is carried to the pre-cut column. Backflush is timed so that only the Naphthalene and other similar components are eluted to the analytical column. Contaminants on the pre-cut column are backflushed to vent. Naphthalene is separated from potentially interfering components on the analytical column and elute to the detector for analysis.

    By MOCON, Inc. - Baseline - AMETEK Distributor in Lahore, PAKISTAN.

  • Premium

    Total sulfur measurement for sulfur compounds in CO2 for food & beverage industry

    The BevAlert Model 8900 provides a total sulfur measurement for sulfur compounds in Carbon Dioxide. The measurement includes organic sulfides, Sulfur Dioxide, Carbonyl Sulfide, and Hydrogen Sulfide. The instrument is utilized by Specialty Gas Manufacturers and the Food and Beverage Industry to monitor sulfur compounds in CO2 used in carbonated beverages.

    By MOCON, Inc. - Baseline - AMETEK Distributor in Lahore, PAKISTAN.

  • Premium

    Measurement of vinyl chloride, acetaldehyde, methanol, and benzene in CO2 applicaitons for gas manufacturer & food and beverage industry

    The BevAlert Model 8900 provides direct measurement of Vinyl Chloride, Acetaldehyde, Methanol, and Benzene (VCAMB) in Carbon Dioxide. The instrument is utilized by Specialty Gas Manufacturers and the Food and Beverage Industry to monitor trace impurities in CO2 used in carbonated beverages.

    By MOCON, Inc. - Baseline - AMETEK Distributor in Lahore, PAKISTAN.

  • Premium

    Measurement of acetaldehyde, methanol, & benzene in CO2 applications for gas manufacturers & food & beverage industry

    The BevAlert Model 8900 provides direct measurement of Acetaldehyde, Methanol, and Benzene (AMB) in Carbon Dioxide. The instrument is utilized by Specialty Gas Manufacturers and the Food and Beverage Industry to monitor trace impurities in CO2 used in carbonated beverages. The BevAlert Model 8900 employs a photoionization detector (PID). The AMB in the gas sample are physically separated using proprietary GC columns. A dual-column configuration with timed backflush to vent is used to strip off moisture and heavier gases. At sample injection, a fixed volume of sample is carried through the pre-cut column. The backflush is timed so that primarily the AMB and other similar compounds continue on to the analytical column. Contaminants are then backflushed to vent. Acetaldehyde, Methanol, and Benzene are separated from potentially interfering components on the analytical column and elute to the detector for analysis.

    By MOCON, Inc. - Baseline - AMETEK Distributor in Lahore, PAKISTAN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you