Applications in Poland
-
Premium
Analytical Instruments for Analyzing by-Products, Effluents and Waste
Discover analysis and sample preparation solutions for environmental sum parameters like TOC, AOX, EOX, TX, TOX, TC, TS and many more, for cooling and waste water, contaminated soil, brine, and other process relevant matters like catalysts, waste oil, residues among others. These solutions can be applied in environmental protection, industrial self-control for effluents, recycling, regeneration, and ...
By Analytik Jena - an EndressHauser Company Distributor in Poznań, POLAND.
-
Premium
Monitoring of mercury in mercury-containing waste
By Lumex Instruments Distributor in Warszawa, POLAND.
-
Premium
Determination of mercury in mercury-containing wastes
INTRODUCTION Mercury is widely used in chemical industry, electronic s, electric engineering, instrument making, medicine, pesticide and explosives production, etc. A number of techniques and equipment are developed for reclaiming mercury-containing waste, such as soil, sludge, stillage botto ms, slime sediments, fluorescent lamps, mercury-containing ...
By Lumex Instruments Distributor in Warszawa, POLAND.
-
Premium
Air pollution, emission and process monitoring systems for incineration
ENVEA’s long association with the Incineration Industry includes supporting Process Operators to meet environmental obligations and the requirement for high performance instrumentation with quality assurance features for compliance reporting. In addition to the importance of regulatory compliance, the control and treatment of emissions from Incineration processes represents a significant proportion of overall costs, therefore, quality data from emissions and process monitoring provides valuable feedback on ...
By ENVEA Distributor in Poznan, POLAND.
-
Premium
Machine condition monitoring for marine
Overview Machine condition monitoring based on oil analysis has become an important, if not mandatory, maintenance practice by the marine industry. An effective oil analysis program will keep important assets such as engines, gearboxes, hydraulic systems, turbines, compressors, generators and any other oil-wetted machinery in operation by reducing unexpected failures and costly unscheduled down ...
By AMETEK Spectro Scientific Distributor in Józefów, POLAND.
-
Premium
High-end baling and waste compacting solutions for RDF, SRF and MSW sector
Refused-derived fuel (RDF) is a form of municipal solid waste (MSW) that has been treated in order to burn more efficiently. Solid recovered fuel (SRF) is waste derived fuel that meet a higher quality specification than ...
By Presona AB Office in Warsaw, POLAND.
-
Pelleting plants for Recycling industry
Sustainability and recycling are becoming increasingly important issues. "What happens to the waste produced?" AMANDUS KAHL plants provide the answers to these ...
By Amandus Kahl GmbH & Co. KG Distributor in Warszawa, POLAND.
-
Bins for cooking fats, oils, food wastes, liquid slops, slaughterhouse wastes and animal by-products
The FATBOXX and FATBOXX max are perfectly new waste bins for disposing of cooking fats, oils, food wastes and liquid slops and slaughterhouse wastes and animal by-products. The special construction of the body and lid offer many benefits for end consumers and waste management ...
By P. Henkel GmbH Distributor in Milomlyn, POLAND.
-
Containers for empty and partially empty aerosols
Bins for disposal of empty or partially empty ...
By P. Henkel GmbH Distributor in Milomlyn, POLAND.
-
ANIS Binding device for plastic recyclers
We offer balers with great compression force and an additional binding device for cross-binding. It can bale PET packaging of up to 110 x 77 x 120–150 cm in size and weighing 400–500 kg. It will enable the loading of more than 22 tons into a 40'' ...
By Anis Trend d.o.o. Distributor in Lublin, POLAND.
-
Classification and identification of recyclable material
This level is expected to reach over 4 million tons by 2010. Companies that specialize in recycling carpet require a fast, reliable and accurate means of identifying the carpet face fiber type entering recycling streams. Collection of plastics for recycling is increasing rapidly. Plastic recycling faces one huge problem, plastic types must not be mixed for recycling. Even a small amount of the wrong type of plastic can ruin the melt. Whether it is a carpet or plastic, classification and identification of ...
By Bruker Corporation Distributor in Warszawa, POLAND.
-
ANIS Automatic binding devices for Cardboard factories and cardboard packaging manufacturers
The balers in this section are suitable for Printing offices, cardboard factories or cardboard packaging manufacturers, aluminum foils, hygiene paper. The balers are uppgraded to prevent affection by dust and small pieces. Ussually have custom made solution that includes a transport system from the origin of the waste to the ...
By Anis Trend d.o.o. Distributor in Lublin, POLAND.
-
ANIS Baling for wet insulation material manufacturers
The above-mentioned solutions are already available. New demands on us only mean new challenges. The bale can be bound according to the weight of the material transported into the baler. The material can be partially torn apart for easier filling if there are very large pieces at the filling entrance. We offer a baler that is adjusted to the baling of wet material and to having water leakage. Slide sleeves and other exposed parts are made of solid, wear-resistant materials because of the abrasiveness of the glass ...
By Anis Trend d.o.o. Distributor in Lublin, POLAND.
-
Waste compaction for the pet & plastic bottles industry
PET and other rigid plastics are usually made from either PET, high density polyethylene (HDPE), polypropylene (PP) or polystyrene (PS) – the hard, not expanded type. Recovered items such as bottles, pots and containers can all be baled sold on to recycling companies. If you’re unsure which type of plastic waste your business generates, we can help you identify it and recommend the best solution for your needs. HSM provides balers for use with plastics in many different scenarios from small volumes, ...
By HSM GmbH + Co. KG Office in Warszawa, POLAND.
-
Recycling equipments for shredder light fraction (SLF) recycling
Dismantled ELVs (End of Life Vehicles) are sold to shredder operators and are reduced to fist-size pieces by large rotating hammer mills. The Shredder Light Fraction (SLF) is removed from the stream by suction, the intensity of which determines the amount and composition of the SLF. SLF consists essentially of plastics/rubber (~60%), Glass/sand i.e. mineral substances (~15%), Textiles/leather/wood (~10%), Paint dust/rust (~10%) and Residual metals (~5%). Other names for SLF are ASR (Automobile Shredder Residue) ...
By Eldan Recycling A/S Distributor in Izabelin, POLAND.
-
ANIS Heavy-duty balers for paper mills
We manufacture heavy-duty type ATS110-110 balers, adjusted to your specifications, and with a large 120 x 190 cm filling shaft, 5 horizontal binding devices, 110–205 ton compression force, and 45–180 kWs of power. We also offer smaller balers such as the ATS75-100 and ATS75-75. Each baler can be equipped with an anti-blocking system for dealing with congestion due to an excess of loaded material. We also offer smaller automatic channel presses without the binding device for water extrusion from the waste during ...
By Anis Trend d.o.o. Distributor in Lublin, POLAND.
-
Recycling equipments for various scrap
Where some see waste or scrap, others see opportunities. The recycling equipment from Eldan has converted millions of tonnes of industrial and consumer waste and scrap into valuable resources, thus helping both business and environment. We have the know-how, the experience and the capability to help with your specific problem – from small to large scale projects, from designing the recycling system to commissioning, we are there for ...
By Eldan Recycling A/S Distributor in Izabelin, POLAND.
-
Bins for healthcare waste disposal
Bins for healthcare ...
By P. Henkel GmbH Distributor in Milomlyn, POLAND.
-
Waste handling solutions for the waste splitting sector
Mechanical treatment as the foundation for recycling: The reuse of materials and energy from waste is central to modern waste management. The foundation for it is laid by mechanical preparation in the form of waste splitting. In it, recyclables are recovered from the waste stream and high-yield combustibles are separated out for further processing as refusederived fuels (RDF). The remaining residue fraction can be stabilized and then ...
By Komptech GmbH Distributor in Warsaw, POLAND.
-
ANIS Plastic Bottle Recyclling
By Anis Trend d.o.o. Distributor in Lublin, POLAND.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you