environmental technologies Applications in Russia

  • Environmental technology for evaporation industry

    Based on long-time experience and permanent development of the jet pump technology Körting is a world-wide leader with their products for heat recovery. As thermocompressors in evaporation plants or as compressors to adjust pressure levels in steam networks Körting jet pumps guarantee high energy efficiency.

    By Körting Hannover AG Distributor in Moskau, RUSSIA.

  • Environmental technology for chilling - crystallisation industry

    For the generation of chilled water (down to 0°C) as well as for diverse crystallisation processes Körting steam jet chilling plants are used. This special chilling technique uses waste heat at a temperature level down to 80°C as motive energy. The first plants with combination of power/heat/chilling coupling are already in operation.

    By Körting Hannover AG Distributor in Moskau, RUSSIA.

  • Environmental technology for paolyester plants industry

    For vacuum generation during the polycondensation process specially developed glycol steam jet vacuum systems are used.

    By Körting Hannover AG Distributor in Moskau, RUSSIA.

  • Environmental technology for chemical industry

    For the generation of vacuum in chemical process, Körting supplies tailor-made solutions to meet the complex requirements in chemical engineering: suction pressure ranging down to 0.01 mbar, suction flows down to 0.5 kg/h. The Körting technology including service and advice are essential components for plant stability and safe operation.

    By Körting Hannover AG Distributor in Moskau, RUSSIA.

  • Environmental technology for steel degassing industry

    In steel production raw steel is refined during the secondary metallurgy in so-called RH plants (Ruhrstahl-Hereaus-Plants). The vacuum treatment in RH plants produces steels which will fulfil the highest demands in quality. For this the liquid steel is delivered in to a vacuum chamber where a considerable drop in pressure causes it to disintegrate in to the smallest of parts. This increase in surface area allows the smelt to degas to the best possible extent. The vacuum plants required for such processes must be reliable and able to suck off very large flow rates under the most difficult of conditions (dusty atmospheres, high temperatures).

    By Körting Hannover AG Distributor in Moskau, RUSSIA.

  • Environmental technology for petroleum refineries industry

    Particulary high demands are placed on vacuum systems used in this industrial area. Exactly matching Körting steam jet vacuum pumps and Körting surface condensers fulfil the highest requirements. A reliable design for optimum consumption figures can be guaranteed at all times because of our company`s specially developed design software for these processes.

    By Körting Hannover AG Distributor in Moskau, RUSSIA.

  • Environmental technology for textile finishing industry

    The mercerisation of cotton materials yields large quantities of weak caustic soda. Recovery of mercerising lye by means of our Körting evaporation technology developed specially for this process results in an immense saving of costs and a minimised impact on the environment. When combined with a specially co-ordinated lye cleaning system the result is a nearly 100% recovery of lye.

    By Körting Hannover AG Distributor in Moskau, RUSSIA.

  • Environmental technology for paper industry

    The manufacture of paper requires an extremely careful and sensitive process control. Körting steam jet thermocompressors are a major factor for high product quality.

    By Körting Hannover AG Distributor in Moskau, RUSSIA.

  • Environmental technology for shipbuilding industry

    In shipbuilding Körting water jet ejectors do all critical pumping jobs on board a ship: bilging inaccessible tank and ballast spaces. conveying solids on long dredger suction heads. essential component in fresh water production plants on sea.

    By Körting Hannover AG Distributor in Moskau, RUSSIA.

  • Premium

    Thin-film Measurement Technology for Appliance Industry

    Measurement and control is an essential element in the success of products in the consumer appliance industry. Precise temperature measurement in cooking equipment along with flow control in cleaning equipment are crucial to the proper functioning of different appliances. IST’s thin film platinum temperature sensors are ideal for the long term precise measurements required by many of these devices. They are also capable of measuring extremely high temperatures at which some appliances operate. IST’s flow sensors, with the ability to measure pressure differential and flow direction, are more than capable of meeting the needs of products in the appliance industry.

    By Innovative Sensor Technology (IST) Distributor in St. Petersburg, RUSSIA.

  • Premium

    Peristaltic pumps and fluid path technologies for OEM solutions

    Watson-Marlow peristaltic pumps are fitted as original equipment to a vast range of products where accurate, safe and reliable transfer, metering and dosing duties are required.

  • Environmental technology for droplet seperation industry

    As component of the gas scrubbing plants or as single apparatus Körting swirl droplet separators for seperating droplets and recondensates make an essential contribution towards the observation of emission codes and therefore towards the protection of the environment. They are used in gas scrubbing and vacuum plants, for condensate separation in chimney stacks, in evaporating plants as well as for the separation of difficult products (e. g. those with a tendency to polymerisation).

    By Körting Hannover AG Distributor in Moskau, RUSSIA.

  • Environmental technology for gas cleaning industry

    For many decades now Körting gas scrubbing plants have distinguished themselves in diverse branches of industrial exploitation with great success. The principle components of these plants are the: The conversion of basic process engineering oparations for the exchanging of heat and materials such as cooling, physical and chemical absorption and dedusting permit separation and recovering of gaseous, liquid and solid materials from gases.

    By Körting Hannover AG Distributor in Moskau, RUSSIA.

  • Environmental technology for droplet seperation industry

    As component of the gas scrubbing plants or as single apparatus Körting swirl droplet separators for seperating droplets and recondensates make an essential contribution towards the observation of emission codes and therefore towards the protection of the environment. They are used in gas scrubbing and vacuum plants, for condensate separation in chimney stacks, in evaporating plants as well as for the separation of difficult products (e. g. those with a tendency to polymerisation).

    By Körting Hannover AG Distributor in Moskau, RUSSIA.

  • Environmental technology for water treatment industry

    In many fields of water treatment Körting ejectors are applied as gas introducing systems; Waste water aeration in aeration tanks and SBR-Plants. Introducing ozone or oxygen. Pressurised dissolved air flotation. Disinfection of potable water and de-acidification.  Further applications are: Diluting and conveying acids and lye during the process of regenerating ion exchangers.

    By Körting Hannover AG Distributor in Moskau, RUSSIA.

  • Environmental technology for edible oil industry

    In practically all important process stages for the production of edible oils, Körting steam jet vacuum pumps and vacuum systems are traditionally a guarantee for an energy - efficient and reliable vacuum creation. To meet today`s increasing demands for energy savings and environmental protection Körting now supplies different specially developed systems with closed water circuits, cold-water systems as well as ice (dry)-condensation vacuum systems.

    By Körting Hannover AG Distributor in Moskau, RUSSIA.

  • Premium

    Thin-film Measurement Technology for Building Automation Industry

    The Heating Ventilation and Air-condition (HVAC) market in the Building Automation industry focuses on controlling atmospheric conditions to make them more suitable. Among the conditions controlled by these systems are temperature and humidity. aIST’s thin film platinum and nickel temperature sensors are ideal for heat meter monitoring and control applications in HVAC because of their high resolution and long term accuracy. Additionally, IST’s thin film capacitive humidity sensors are ideal for controlling the relative humidity of an environment due to their rapid response times and accuracy over time. Thermal mass flow sensors also have applications in the HVAC industry as an indicator of duct airflow

    By Innovative Sensor Technology (IST) Distributor in St. Petersburg, RUSSIA.

  • Instrumentation technologies for marine

    When ships discharge their bilge water the maximum level of hydrocarbons in the water is regulated by various Environmental Protection Agencies, for example there is a limit of 15ppm enforced by the IMO (International Maritime Organisation) in all international waters.  Companies breaching these limits are liable to significant fines. Further regulations have been introduced to control the use of bunker fuels. The Marine Environment Protection Committee (MEPC) of the IMO has approved proposed amendments to the MARPOL Annex VI regulations to reduce harmful emissions from ships.

    By Advanced Sensors Ltd. - part of PAC L.P. Distributor in Moscow, RUSSIA.

  • Instrumentation technologies for offshore industry

    Offshore installations, whether it’s a drilling rig, production platform or FPSO, have some of the most testing operating environments possible. Operators must combine the drive to efficiency with their environmental commitments. Whatever analyzer you choose should not only match your needs and add value but must not take up valuable resources whether that’s personnel or consumables.

    By Advanced Sensors Ltd. - part of PAC L.P. Distributor in Moscow, RUSSIA.

  • Reliable Shredding Technology for Electronic Scrap

    Our customized solutions enable you to efficiently shred electronic scrap in your recycling facility and they align perfectly with your recycling system. The granulate size is adjusted such that metals and non-metals can be separated and recycled as best as possible. More than 40 million tons of electrical and electronic scrap are generated annually – and the trend is growing dramatically! Recycling electronic devices is not just beneficial for environmental reasons. This scrap, as a rule, contains many precious metals that are recovered during the recycling process. To ensure a high yield during the recovery process, the shredding should generate only a very low amount of fine particles.

    By UNTHA Shredding Technology Gmbh Distributor in RUSSIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you