Applications in Saudi Arabia

  • Premium

    Boiler Water Testing / Cooling Tower Water Testing

    Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level...

    By Myron L Company Distributor in SAUDI ARABIA.

  • Premium

    Circuit Board Cleanliness Testing

    Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple `on line` test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L...

    By Myron L Company Distributor in SAUDI ARABIA.

  • Premium

    Deionized Water Testing

    Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car wash.

    By Myron L Company Distributor in SAUDI ARABIA.

  • Premium

    Oxidation Reduction Potential (ORP)/Redox

    Oxidation Reduction Potential or Redox is the activity or strength of oxidizers and reducers in relation to their concentration. Oxidizers accept electrons, reducers lose electrons. Examples of oxidizers are: chlorine, hydrogen peroxide, bromine, ozone, and chlorine dioxide. Examples of reducers are sodium sulfite, sodium bisulfate and hydrogen sulfide. Like acidity and alkalinity, the increase of one is at the expense of the other.

    By Myron L Company Distributor in SAUDI ARABIA.

  • Premium

    Pool Water Testing / Spa Water Testing

    Anyone and everyone who is responsible for operating and maintaining a swimming pool or spa has to test, monitor, and control complex, interdependent chemical factors that affect the quality of water bathers are immersed in. Additionally, aquatic facilities operators must be familiar with all laws, regulations, and guidelines governing what these parameters should be.

    By Myron L Company Distributor in SAUDI ARABIA.

  • Premium

    Water Testing for Automatic Rinse Tank Controls

    Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors...

    By Myron L Company Distributor in SAUDI ARABIA.

  • Premium

    Water Testing for Horticulture

    Modern growing practices include scientific evaluations of soil, water, fertilizers, diseases, etc. While some tests are best performed by a laboratory, others can be easily conducted on location, saving time and money. Three tests in particular, EC, pH, and ALKALINITY, can reveal valuable information about water quality, soil salinity, and fertilizer concentration. MyronL Company’s portable AGRI-METERS provide you with a simple, fast, and accurate means of testing these parameters.

    By Myron L Company Distributor in SAUDI ARABIA.

  • Premium

    Water Testing for Textile Manufacturing

    The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated...

    By Myron L Company Distributor in SAUDI ARABIA.

  • Premium

    Water Testing for Environmental Applications

    Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation`s waterways. Today, in many...

    By Myron L Company Distributor in SAUDI ARABIA.

  • Premium

    Fountain Solutions

    Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriate...

    By Myron L Company Distributor in SAUDI ARABIA.

  • Premium

    Reverse Osmosis Water Testing

    Osmosis is the phenomenon of lower dissolved solids in water passing through a semi-permeable membrane into higher dissolved solids water until a near equilibrium is reached. Reverse Osmosis (RO) is a membrane process of purification which removes most of the the total dissolved solids (TDS) in water by reversing the natural process of osmosis. Pressure is applied to a TDS-concentrated solution against a semi-permeable membrane, causing pure water to diffuse through the membrane. RO has become an important...

    By Myron L Company Distributor in SAUDI ARABIA.

  • Premium

    High pressure flow solutions

    Precision high pressure mass flow control is very difficult. Sierra has met this challenge with a patented high pressure mass flow controller design that offers impermeable elastomers with very little leakby.

    By Sierra Instruments, Inc. Distributor in Damman, SAUDI ARABIA.

  • Premium

    Waste sorting solutions for the upgrading plastics industry

    Using innovative systems, TOMRA Sorting enables you to reliably produce high quality yield, leading to higher profitability and greater ROI.

    By TOMRA Sorting GmbH. Distributor in Riyadh, SAUDI ARABIA.

  • Premium

    Pre-sorted Material Sorting

    TOMRA can help you sort the value out of Pre-sorted material. The input material of pre-sorted plastics will usually contain materials such as bottles and foil. Before recycling, any impurities need to be cleaned out in order to sort out any residue of organic matter, metals, PVC or coloured PET. The material is checked for colour and material. In the bottle-to-bottle procedures highest and consistent quality standards are required.

    By TOMRA Sorting GmbH. Distributor in Riyadh, SAUDI ARABIA.

  • Premium

    Portable and fixed gas analysers for sewage / waste water treatment AD

    AD of human waste has been common in many countries for years but increasing energy costs now drive efficiency. Sewage processors are large energy users and AD can offset and help manage this.

    By Geotech Distributor in Jeddah, SAUDI ARABIA.

  • Premium

    Laboratory instruments solutions for chemical industry

    Converting raw materials into more than 70 000 different products that are used in almost all industries, the chemical industry lies at the core of the global economy and, perhaps, modern civilization. There is hardly any industrially produced good that would exist without the chemical industry, all the more considering that it was not until the 19th century that chemistry, particularly organic chemistry, exploded with Wöhler’s urea synthesis. Within just a few decades, numerous important industrial...

    By Metrohm AG Distributor in Dammam, SAUDI ARABIA.

  • Premium

    Flow meters for the general research flow measurement solutions

    Supporting research and production worldwide for over 40 years.  Mass flow meters and controllers give you the advantage with precision data and application flexibility.

    By Sierra Instruments, Inc. Distributor in Damman, SAUDI ARABIA.

  • Premium

    Water analysis for municipal wastewater treatment

    Voltammetric determination of many heavy metals is also possible in municipal or industrial wastewater. On account of the usually high organic load the sample is usually mineralized by means of UV digestion. 

    By Metrohm AG Distributor in Dammam, SAUDI ARABIA.

  • Premium

    Flow Measurement instrumentation for mass flow measurement & control flow solutions

    We manufacture a variety of mass flow technologies for precision measurement of gases, liquids, and steam.

    By Sierra Instruments, Inc. Distributor in Damman, SAUDI ARABIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you