Applications in Ukraine

  • Premium

    Tunnel solutions for the light sensors

    According to the International Committee on Illumination CIE recommendations, luminance should be monitored as the luminance contained within in a conical field of view, subtending an angle of 20º. It is recommended that a luminance photometer is mounted in the tunnel approach road approximately 120 - 200 metres from the portal, depending on the approach speed of the vehicles and their stopping distance. The purpose of monitoring the luminance at the portal is to adjust the level of light intensity inside the road tunnel to the light intensity outside so that drivers do not have to adjust their eyes quickly or become affected by the “black hole” effect where they decelerate rapidly and become a hazard to other road users.

    By Codel International Ltd Distributor in Kyiv, UKRAINE.

  • Premium

    Monitoring solutions for the flue gas desulphurisation

    Most large coal fired plants have a flue gas desulphurisation (FGD) plant to lower SO2 levels to below emission limit levels. The CODEL GCEM 40 series is used to monitor SO2 levels after the FGD to ensure they are below required levels and to ensure that the process is not too efficient and using too much sorbent. In addition, many plants monitor pre and post the FGD to ascertain the efficiency of the plant.

    By Codel International Ltd Distributor in Kyiv, UKRAINE.

  • Premium

    Monitoring solutions for the marine industry

    While land-based industry has been subject to strenuous emissions regulations over the past decades, air emissions from sea-going ships’ machinery has so far been largely unregulated. As a result, according to EU statistics, ships have become the single biggest source of sulphur dioxide (SO2) within the EU. The US EPA (US Environmental Protection Agency) reports similar findings, i.e., that the proportion of air pollutants released which can be attributed to the shipping industry is increasing. MARPOL Annex VI aims to reduce emissions from ships through international regulations, which hopefully will discourage states from enacting unilateral regulations problematic to the shipping industry.

    By Codel International Ltd Distributor in Kyiv, UKRAINE.

  • Premium

    Monitoring solutions for the opacity and dust monitoring

    There is a requirement for many small boiler operators to monitor Opacity to determine the smoke density emitted from the boiler. On small boilers we recommend the DCEM 1001 Opacity monitor; this simple, low cost monitor   has high efficiency air purges use compressed air to ensure that optical surfaces are virtually free of dust or debris contamination. This ensures minimal maintenance is required on the sensors.

    By Codel International Ltd Distributor in Kyiv, UKRAINE.

  • Premium

    Monitoring solutions for the dust collectors

    Most industrial processes have dust collectors of some form or other, the most popular being filter bag houses. Very few of these are covered by regulation other than to have a broken bag detector to prevent nuisance dusts escaping and creating a local nuisance. The CODEL StakGard is a low cost Tribo-electric monitor that directly measures mass particulate concentration by sensing the
    frictional charge created when particles collide with a conductor. The advanced electronics of the StakGard detect this signal and present it to the operator via a unique modulating LED display.

    By Codel International Ltd Distributor in Kyiv, UKRAINE.

  • Premium

    Monitoring solutions for the dust monitors areas

    For large combustion plants and power plants we offer the DCEM 2100 particulate monitor. This monitor is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It offers outputs in Transmission, Opacity and mg/m3 (when calibrated against a Standard Reference Method). The DCEM 2100 offers real-time zero and span calibration and an efficient air purge system to prevent optical contamination.

    By Codel International Ltd Distributor in Kyiv, UKRAINE.

  • Premium

    Reliable Shredding Technology for Metal-processing Industry

    Regardless of whether your metal waste comes from the metal-processing industry, automotive industry, electronics industry, waste industry or commercial production, we will always offer you the right shredding system for recycling your valuable resources! Metals are important raw materials for the industry and can be repeatedly returned to the recovered resource cycle with very little loss. The recycling of metals saves valuable raw materials and energy as opposed to the new processing of ores.  Our sturdy rotary shears that have been tried and tested a thousand times over, reliably and efficiently shred light metals such as aluminium, magnesium, Al-Mg alloys, copper or nickel, as well as harder metals such as iron, zirconium, titanium and sheet steel.

    By UNTHA Shredding Technology Distributor in UKRAINE.

  • Premium

    Reliable Shredding Technology for Refuse Derived Fuels (RDF)

    Our shredding solutions enable you to optimally recycle waste into substitute fuels / alternative fuels and ensure high quality by producing a homogeneous granulate free of foreign objects. The goal of recycling is to use the valuable energy contained in the waste and to substitute the use of fossil fuels. During the recycling process the portions with a high calorific value are separated from the commercial and industrial waste and turned into a marketable product. Depending on the calorific value and the granular size, these fuels are used in fluidised bed combustion, cement plants and substitute fuel power plants.

    By UNTHA Shredding Technology Distributor in UKRAINE.

  • Premium

    Reliable Shredding Technology for Plastic Materials

    As a renowned manufacturer of reliable plastics shredders, we offer special machines for in-house recycling and for heavily contaminated post-consumer waste. Due to its format, components and characteristics, plastic is a very versatile material that is primarily used in industrial mass production. The resulting plastic waste can be recycled by shredding and washing the material, before generating a reusable, recycled granulate. Shredded plastic waste can also be used for energy generation.

    By UNTHA Shredding Technology Distributor in UKRAINE.

  • Premium

    RDF/SRF shredder

    UNTHA shredding technology is offering reliable RDF/SRF shredder with high throughput.

    By UNTHA Shredding Technology Distributor in UKRAINE.

  • Premium

    Road tunnel atmosphere monitoring

    CODEL`s road tunnel monitors are designed exclusively for road tunnel applications. It offers a family of tunnel sensors that provide all the essential measurements necessary to monitor the tunnel atmosphere.

    By Codel International Ltd Distributor in Kyiv, UKRAINE.

  • Premium

    Reliable Shredding Technology for Waste Wood Recycling Industry

    Waste wood is a precious resource that is available in large volumes and may be used either for material recycling or energy production, depending on the quality grade. The rising cost of waste material disposal and a growing consciousness for the environment also contribute to the increasing importance of waste wood recycling. The term “waste wood” includes all woods and wood-based materials that have come to the end of their product lifespan and are thus considered waste.

    By UNTHA Shredding Technology Distributor in UKRAINE.

  • Premium

    Tunnel solutions for the extractive areas

    In some countries they do not allow tunnel atmosphere monitors to be mounted on the tunnel wall; also, where there is a single bore it is very difficult to gain access for maintenance purposes. The TunnelTech 400 series are extractive gaseous pollutant and visibility monitors and extract a gas and dust sample from the tunnel bore and carry to a remote analyser. This allows maintenance to take place without affecting tunnel traffic flow.

    By Codel International Ltd Distributor in Kyiv, UKRAINE.

  • Premium

    Tunnel solutions for the tunnel air flow

    Tunnel ventilation systems are designed to enable a sufficient throughput of air to be maintained to ensure a safe operating environment for users. These systems consume large amounts of power and need to be operated as efficiently as possible. To do this it is necessary to know the effectiveness of the system in terms of air flow and direction developed within the tunnel. The TunnelTech 301 is a single point ultrasonic flow monitor that is unaffected by traffic flow and sound reflections. It is designed to withstand the harsh tunnel environment and has a working range of 0-20 metres/second in both directions.

    By Codel International Ltd Distributor in Kyiv, UKRAINE.

  • Premium

    Monitoring solutions for the flow monitoring areas

    Many large combustion plants are now required to monitor mass emissions of major pollutants and to do so requires an accurate measurement of stack gas velocity. The VCEM 5100 is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It has several key advantages, firstly the sensors optics are not in contact with the hot and dusty environment, the VCEM 5100 can monitor gases at temperatures exceeding 10000C and the analyser requires minimal maintenance. The VCEM 5100 can be used in extremely dust environments such as SCR’s when dust loadings exceed 10g/m3. The VCEM 5100 is in full compliance with EN/ISO 16911 part 2.

    By Codel International Ltd Distributor in Kyiv, UKRAINE.

  • Premium

    Monitoring solutions for the flow combustion efficiency areas

    Combustion efficiency is of major importance on small boiler plants and the best way to monitor this is by monitoring CO2 emissions. CODEL offer the Model 1010 Cross-Duct CO monitor. Using Infra-red Gas Filter Correlation technology to filter out interferences such as dust and other gases. The Model 1010 has low maintenance requirements and meets the needs of most boiler applications. In addition to small boilers the Model 1010 is also used on Animal carcass incinerators and Crematoriums.

    By Codel International Ltd Distributor in Kyiv, UKRAINE.

  • Premium

    Fire detection solutions for the power stations sector

    One of the main hazards in a power station is a fire in a coal rich environment; the latter can often become an explosion with consequential damage to human life and capital equipment.

    By Codel International Ltd Distributor in Kyiv, UKRAINE.

  • Premium

    CO gas monitoring for coal pulverising mills

    Our range of safety analysers can offer early detection of fire / explosive conditions. From CO monitors for pulverising coal mills through to UV flame and smoke detectors installed on oil rigs and the cross-channel passenger shuttles, operated by Eurotunnel.

    By Codel International Ltd Distributor in Kyiv, UKRAINE.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you