Applications in United Kingdom

  • Premium

    Industrial evaporation of the chemical industry

    In the chemical industry a wide range of applications can be performed with an industrial evaporator

    By BÜCHI Labortechnik AG Office in Chadderton, Oldham, UNITED KINGDOM.

  • Premium

    Parallel evaporation in environmental consultancy

    For a fast and effcient sample concentration in order to monitor de pollution of the environment

    By BÜCHI Labortechnik AG Office in Chadderton, Oldham, UNITED KINGDOM.

  • Premium

    Laboratory evaporation for pharmaceutical laboratories

    BUCHI offers a variety of reliable solutions for regulated pharmaceutical laboratories

    By BÜCHI Labortechnik AG Office in Chadderton, Oldham, UNITED KINGDOM.

  • Premium

    Coating and Laminating

    MEGTEC’s experience and application know-how are at your command for tough drying and web handling applications such as slow-drying coatings and materials or thin film coating and laminating. Dryers can be equipped with a wide variety of nozzle configurations ranging from simple slot nozzles to sophisticated Coanda-style air bars and patented air foil systems. A full range of heat sources are available including steam, direct and indirect gas-fired, thermal oil, electric, hot water and IR. In addition, the air handling systems can be integrated into the dryer enclosure or stand-alone for remote installation. When the process requires pollution control systems for solvent-based applications, MEGTEC also offers regenerative thermal oxidizers, solvent recovery, distillation and purification systems. MEGTEC also offers waste heat recovery packages to “close the energy loop” between pollution controls and the process, in order to reduce production costs and increase customer profits

    By Babcock & Wilcox MEGTEC Office in Standish, UNITED KINGDOM.

  • Premium

    Wastewater Treatment

    Many industrial and pharmaceutical processes generate wastewater with volatile contaminants that increase the COD and BOD to a point where discharging to municipal wastewater is very costly or not an option. These contaminants can be removed from the water by distillation, substantially lowering the disposal cost, and, in many cases, the removed components can be further purified and reused in the process. MEGTEC offers the following solutions to remove the volatile contaminants and make wastewater suitable for discharge to most municipal wastewater treatment plants: Stripping columns using direct steam or a reboiler Distillation columns using indirect steam heat sources Our technologies have been applied to a range of processes including wastewater treatment from industries such as Pharmaceutical, Semiconductor, Chemical and Petrochemical.

    By Babcock & Wilcox MEGTEC Office in Standish, UNITED KINGDOM.

  • Premium

    Air pollution modeling for air pollution engineers

    By SoundPLAN International LLC Distributor in Pickering, UNITED KINGDOM.

  • Premium

    Waste to Energy

    We can treat the air streams from waste management plants, MBT (Mechanical Biological Treatment) reception and composting areas, Waste Water Treatment Plants (WWTP), Refuse Derived Fuel (RDF) Plants, gasification of waste, syngas, torrefaction, gas engines and biogas upgrading. In waste management plants and WWTP, we remove the odors that may be causing a nuisance to neighbors, with bioreactors using Biomass to degrade odorous components and where odors are particularly intractable or VOC emissions higher, thermal oxidizers to meet prescribed emission limits and odor levels. In RDF Plants, Syngas, Gasification, Gas Engine and Biogas Upgrading applications, we employ thermal oxidizers, particulate removal and DeNOX systems, for the control of VOC, NOx, CO and particulates to prescribed emission limits.

    By Babcock & Wilcox MEGTEC Office in Standish, UNITED KINGDOM.

  • Premium

    Power Generation

    MEGTEC is actively involved in providing Power Generation solutions for many applications ranging from utilizing process heat recovery systems to utilization with boilers, to recovering and utilizing Ventilation Air Methane (VAM) from coal mines. MEGTEC has developed VAM processing technologies for either abatement only and in combination with energy recovery and utilization. MEGTEC’s proven technologies are destroying methane while generating high quality carbon credits, electricity for coal mines and heating for local communities and facilities.

    By Babcock & Wilcox MEGTEC Office in Standish, UNITED KINGDOM.

  • Premium

    Odor Control

    We treat air streams to remove odors allowing industrial processes to be operated in compliance with local regulations and without causing a nuisance to neighbors due to odors and smells. Our technologies have been applied to a range of processes including: Waste treatment (municipal and industrial) Manufacture of flavors Food processing Waste water treatment (Municipal and industrial) Chemical manufacture Rendering

    By Babcock & Wilcox MEGTEC Office in Standish, UNITED KINGDOM.

  • Premium

    Electronics

    In the fast-changing electronics industry with its need for new materials and products, demand for 100% uptime, smooth production operation, many in clean-room environments, MEGTEC meets and exceeds continuous demand for raising the bar of technology excellence. MEGTEC works either directly with the end user or through engineering firms or contractor companies, offering tested package systems as required and our end user list includes most of the well-known manufacturing companies around the globe including producers of ceramic condenser/capacitor, thin film FCCL, solar back film, plasma and LCD screen makers in Asia. We have the breadth of technologies in our portfolio and with our strong engineering design capabilities, collaborate from each of our global facilities and can review your application and recommend the best solution.

    By Babcock & Wilcox MEGTEC Office in Standish, UNITED KINGDOM.

  • Premium

    Measurement solution for formaldehyde FTIR measurement

    Reciprocating internal combustion engines burning natural gas are a source of formaldehyde emissions. There are strict tolerances imposed on operators of engines to ensure that formaldehyde is removed effectively and that formaldehyde emissions are below published limits. The only instrumental method for formaldehyde monitoring is FTIR, following procedures such as US EPA Method 320 and Environment Agency TGN M22. Protea’s FTIR gas analysers have been specifically designed to follow these methods and our FTIR analyser have been proven in formaldehyde emission measurements over many years.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Measurement solution for Perflurocarbon (PFC) emissions from aluminium industry

    The aluminium industry is the major source of perflurocarbon (PFC) emissions to the atmosphere, which are a major contributor to global warming. PFCs have greenhouse gas effects up to 10000 times that of CO2. Emissions have been reduced over the last 20 years, but further reductions are harder to achieve as all the mechanisms for PFC production are not known. In order to better understand the production of PFC on an industrial level, laboratory studies have been carried out using a small scale cell.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Measurement solution for soil chamber gas flux

    Closed chamber gas flux measurements can be made with Protea FTIR analysers to allow researchers in the field of atmospheric gas analysis from agricultural and livestock to measure evolved gases such as N2O, CO2, CO, NH3, and CH4. Nitrous oxide (N2O) and Methane (CH4) emissions from soil, plant and livestock are especially important gases to measure, given their high potential as greenhouse gases (GHGs). NH3, whilst not a greenhouse gas on the scale of N2O, CH4 and CO2, is a major emission from agricultural, such as after the spreading of liquid manure, and steps are required to measure and reduce the NH3 emissions and the effects they have on the ecosystem.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Measurement solution for Biomass combustion research

    The use of alternative combustion fuels that provide a renewable source of energy is a major area of research and investment. Sources of biomass fuels include virgin wood, energy crops, agricultural residues, food waste and industrial waste. Controlling the combustion process of any new fuel and keeping track of the biomass fuel emissions of combustion by-products is important to users of these new fuels.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Measurement solution for fire testing for the railway industry

    A lot of research is carried out in laboratory and on real fires as to the gaseous substances produced in fire effluent. Measurement principles using analytical instrumentation are becoming more widely used in fire testing, due to the quick, real-time nature of the measurements. ISO 19702 is an international standard developed for the use of FTIR analysers in the analysis of gas from fire effluents. Further to this, local test standards such as DIN 5510, applicable to the railway industry, can provide further requirements for gases to be measured.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Measurement solution for liquid TiCl4 vanadium oxychloride monitor

    The chloride process of titanium dioxide (TiO2) pigment manufacture first converts titania-containing ores to TiCl4 via a carbochlorination reaction at a high temperature in a chlorinator in the presence of chlorine gas and petroleum coke added as a reductant.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Measurement solution for siloxane monitoring in biogas and landfill

    The generation of electricity from municipal digesters and land fill is of increasing interest, as the biogas can allow for a form of renewable energy. Organosilicon compounds often find their way into land-fill or digester gases as siloxanes. Siloxanes are low-level hazards to the atmosphere in terms of their emissions, however when they are combusted in gas engines the hard silica that is produced is very harsh to the moving parts of the gas engine.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Measurement solution for QAL2 EN 14181

    BS EN 14181 is a quality assurance standard relevant to plants operating under the Large Combustion Plant (LCPD) and Waste Incineration (WID) Directives. Quality Assurance Level 2 (QAL2) of this standard involves the parallel testing of the plant automated measurement systems (AMS) against a certified test house, making measurements with a comparative standard.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Measurement solution for acrylates speciation

    A customer had a requirement for continuous Ethyl Acrylate monitoring. The process operations emit multiple Acrylate species, all at low concentrations, but only Ethyl Acrylate being reportable to the EA under the terms of the IPC permit. A 204M FTIR analyser was deployed and a chemometric model was built specifically to target Acrylates, with the purpose of separating and accurately quantify the target Ethyl Acrylate species.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you