Applications in United Kingdom

  • Premium

    Waste sorting solutions for the construction & demolition waste

    The growing demand for high-value secondary materials renders high quality recycling increasingly attractive. Thousands of tons of recyclable materials from construction and demolition (C&D) activities are sent to landfill every day, resulting in increasingly higher costs - and lost profit.

    By TOMRA Sorting GmbH. Office in Loughborough, UNITED KINGDOM.

  • Premium

    Recycling equipments for shredder light fraction (SLF) recycling

    Dismantled ELVs (End of Life Vehicles) are sold to shredder operators and are reduced to fist-size pieces by large rotating hammer mills. The Shredder Light Fraction (SLF) is removed from the stream by suction, the intensity of which determines the amount and composition of the SLF. SLF consists essentially of plastics/rubber (~60%), Glass/sand i.e. mineral substances (~15%), Textiles/leather/wood (~10%), Paint dust/rust (~10%) and Residual metals (~5%). Other names for SLF are ASR (Automobile Shredder...

    By Eldan Recycling A/S Office in Pulborough West Sussex, UNITED KINGDOM.

  • Premium

    Continuous emissions monitoring in waste incineration plants

    Waste-to-energy through incineration of waste is an effective way of producing electricity and heat, at the same time getting rid of the possibly hazardous or unrecyclable waste. The waste can be incinerated at specific WtE plants or at plants with permission for co-incineration of waste at biomass boilers or cement kilns. The waste incineration plants are, however, governed by strict emissions regulations.

    By Gasmet Technologies Oy Distributor in UNITED KINGDOM.

  • Premium

    Determination of mercury in mercury-containing wastes

    INTRODUCTION

    Mercury is widely used in chemical industry, electronic s, electric engineering, instrument making, medicine, pesticide and explosives production, etc. A number of techniques and equipment are developed for reclaiming mercury-containing waste, such as soil, sludge, stillage botto ms, slime sediments, fluorescent lamps, mercury-containing batteries.

    By Lumex Instruments Group Distributor in UNITED KINGDOM.

  • Premium

    Magnets for the recycling industry

    Master Magnets equipment is used in many recycling applications such as the recycling of automobiles, electrical goods, skip waste, domestic waste, in fact wherever there is a need to separate metals from other materials. The process of recycling and reclamation invariably involves end-of-life products that may be shredded, crushed or fragmentised and require separation. Master Magnets supply the widest range of industrial magnetic equipment for the separation of ferrous and non-ferrous metals from materials...

    By Master Magnets Ltd based in Redditch, UNITED KINGDOM.

  • Premium

    Waste compaction for the waste & recycling industry

    If you are in the business of waste management, you will share our vision of implementing streamlined systems, operationally sound processes and reliable equipment. HSM is committed to providing the right baler specification for your process, no matter how demanding. HSM has many important and longstanding relationships with many global leading waste management and recycling businesses, supplying balers around the world. We share their visions and understanding of their operational needs.

    By HSM GmbH + Co. KG Office in Burntwood, UNITED KINGDOM.

  • Premium

    Products for plastics recycling

    Machines for the dimensional reduction, cleaning and separation of plastics from contaminants (ex. glass, wood, aggregates, etc.).

    By Guidetti Recycling Systems Distributor in Bucks, UNITED KINGDOM.

  • Premium

    Products for dry densimetric separation

    Dry separation Products for cleaning products having uniform size and different specific weight (ex. metal/plastic, plastic/wood, rice/gravel, etc.).

    By Guidetti Recycling Systems Distributor in Bucks, UNITED KINGDOM.

  • Premium

    Machine condition monitoring for marine

    Overview

    Machine condition monitoring based on oil analysis has become an important, if not mandatory, maintenance practice by the marine industry. An effective oil analysis program will keep important assets such as engines, gearboxes, hydraulic systems, turbines, compressors, generators and any other oil-wetted machinery in operation by reducing unexpected failures and costly unscheduled down time.

    By Spectro Scientific Distributor in Stockport, UNITED KINGDOM.

  • Premium

    Waste compaction for the pet & plastic bottles industry

    PET and other rigid plastics are usually made from either PET, high density polyethylene (HDPE), polypropylene (PP) or polystyrene (PS) – the hard, not expanded type. Recovered items such as bottles, pots and containers can all be baled sold on to recycling companies. If you’re unsure which type of plastic waste your business generates, we can help you identify it and recommend the best solution for your needs. HSM provides balers for use with plastics in many different scenarios from small...

    By HSM GmbH + Co. KG Office in Burntwood, UNITED KINGDOM.

  • Large waste bins for councils and municipalities and the industry

    Absolutely hygienic, stable and cost-efficient. The MGB with spherical base represents hygienic waste disposal of residual and organic waste as well as food waste. The dustbins are optimised for side loaders. Cost benefits for councils and municipalities as well as private waste management companies. Absolutely low-noise, serially only 89 dB in accordance with EU outdoor noise directive 2000/14 EC at the MGB 120-KB and 91 dB at the MGB 240-KB. High operational safety.

    By P. Henkel GmbH Distributor in Woodbridge, UNITED KINGDOM.

  • Foam shredding for production waste industry

    By AWC Engineering Ltd based in Stalybridge, UNITED KINGDOM.

  • Waste shredding for the waste and recycling industry

    WEIMA makes waste valuable! No matter if it is industrial waste, bulky waste, production waste, rejects, paper, wood waste, textiles or carpet. WEIMA delivers the optimum results, winning secondary resource recovery by delivering correct size reduction. WEIMA shredding solutions are designed for every stage of process tailored to your individual needs.

    By WEIMA Office in Kent, UNITED KINGDOM.

  • Waste Treatment for Waste Preparation

    Material sorting and preparation is essential for effective product valorisation. Aware of this aspect, Ménart has participated in pioneering projects, equally in the preparatory stage of diverse organic waste destined for biogaz valorisation, through composting or co-generation, and in the sorting of household and industrial waste to be recycled, for example, for combustible waste.

    By Menart Distributor in Winchester, UNITED KINGDOM.

  • Recycling Equipment for Municipal Solid Waste

    Optimizing output in terms of economic value against the lowest possible costs per tonne. This is the short-term goal for every installation that Bollegraaf provides. The long-term goal is to ensure permanently low operatingcosts and achieve an optimal return on investment.

    By Bollegraaf Recycling Solutions Office in Rugeley, UNITED KINGDOM.

  • Energy and Fuels from Commercial Waste

    Commercial Waste is similar to Municipal Solid Waste although it tends to have more biodegradable products. Commercial waste is defined as all wastes created by commercial businesses. This can include, but is not necessarily limited to, solid or liquid wastes originating from offices, stores, markets, restaurants, shopping centres and other enterprises. We receive Commercial waste into the Materials Recycling Facility (MRF) at the front end of the Gasplasma® energy from waste plant. Any recyclable materials are...

    By Advanced Plasma Power (APP) based in Swindon, UNITED KINGDOM.

  • Compact Filtration for Parts Cleaning / High-pressure Cleaning

    Parts cleaning in the automotive industry; In view of the growing variety, shorter delivery times and continuously rising output volumes, short cycle times ensure both manufacturers and suppliers in the automotive industry remain competitive on the international market while safeguarding high parts quality and manufacturing precision at the same time.

    By GKD - Gebr. Kufferath AG Office in Tower Hamlets, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you