Applications in Connecticut

  • Premium

    Recycling sorting solutions for the non-ferrous metals - post shredder

    The widespread use of electronic products has created an enormous demand for the sorting of non-ferrous metals such as copper and aluminum. To be usable, these non-ferrous metal fractions must be treated to a high degree of purity. Thanks to TOMRA’s efficient sorting technology, separating these materials from metal waste makes is worthwhile in every aspect.

    By TOMRA Sorting GmbH. Distributor in CONNECTICUT (USA).

  • Premium

    Waste sorting solutions for the packaging industry

    Packaging waste is mostly made up of different polymers, beverage cartons, paper and glass. Depending on the country in question, different collection systems apply and the material will invariably arrive in different conditions to the MRF’s (Materials Recovery Facility).

    By TOMRA Sorting GmbH. Distributor in CONNECTICUT (USA).

  • Premium

    Waste sorting solutions for the bulky waste

    Bulky waste sorting can produce a high number of valuable materials. The accessibility of these materials, however, is challenging due to its cumbersome nature.

    By TOMRA Sorting GmbH. Distributor in CONNECTICUT (USA).

  • Premium

    Waste sorting solutions for the refuse derived fuel

    One way in which valuables within waste can be utilized is by using it as fuel. Refuse derived fuel (RDF) is a term that applies to materials with a high calorific value (typically around 18 Mega joule per kilogram) that are removed from waste streams. Beneficiaries of this material are cement kilns to power plants.

    By TOMRA Sorting GmbH. Distributor in CONNECTICUT (USA).

  • Premium

    Waste Sorting - CRT Glass Sorting

    End of life TV sets and computer monitors require to be recycled to maximise the level of material recovery, and to meet the requirements of the EU WEEE Directive. CRT glass is the largest item by weight. However, because of the 2 different types of glass used in CRT manufacture, the glass fractions have to be sorted to achieve a separation of the 2 type of glass, i.e. panel glass sorted from funnel glass. X-TRACT separator is able to sort the panel glass from the funnel glass. It does it by comparing their different atomic densities, and analysing the data from the X-Rays using a bi-chromatic sensor system. X-TRACT is the first industrial application for any dry mechanical density sorting.

    By TOMRA Sorting GmbH. Distributor in CONNECTICUT (USA).

  • Premium

    Waste sorting solutions for the construction & demolition waste

    The growing demand for high-value secondary materials renders high quality recycling increasingly attractive. Thousands of tons of recyclable materials from construction and demolition (C&D) activities are sent to landfill every day, resulting in increasingly higher costs - and lost profit.

    By TOMRA Sorting GmbH. Distributor in CONNECTICUT (USA).

  • Premium

    Recycling sorting solutions for the wood industry

    TOMRA Sorting can help you sort the contaminants out of wood.

    By TOMRA Sorting GmbH. Distributor in CONNECTICUT (USA).

  • Premium

    Recycling sorting solutions for the ash recycling

    Incinerated municipal solids and other waste streams results in a significant amount of ash residue, which often contains valuable metals. The amount of this remnant being created globally is rapidly increasing due to legislation which prohibits landfilling and creates new incentives for incineration. TOMRA Sorting sensor-based systems allow waste management businesses to capitalize on today’s challenges whilst simultaneously enabling them to look to the future with confidence.

    By TOMRA Sorting GmbH. Distributor in CONNECTICUT (USA).

  • Premium

    Waste sorting solutions for the upgrading plastics industry

    Using innovative systems, TOMRA Sorting enables you to reliably produce high quality yield, leading to higher profitability and greater ROI.

    By TOMRA Sorting GmbH. Distributor in CONNECTICUT (USA).

  • Premium

    Recycling sorting solutions for the end-of-life vehicle scrap - shredder

    The growing demand for high-value, secondary raw materials renders targeted recycling increasingly attractive. Modern TOMRA Sorting technology generates clean non-ferrous metal fractions in customer shredder operations and results in valuable scrap metal gains.

    By TOMRA Sorting GmbH. Distributor in CONNECTICUT (USA).

  • Premium

    Pre-sorted Material Sorting

    TOMRA can help you sort the value out of Pre-sorted material. The input material of pre-sorted plastics will usually contain materials such as bottles and foil. Before recycling, any impurities need to be cleaned out in order to sort out any residue of organic matter, metals, PVC or coloured PET. The material is checked for colour and material. In the bottle-to-bottle procedures highest and consistent quality standards are required.

    By TOMRA Sorting GmbH. Distributor in CONNECTICUT (USA).

  • Premium

    Waste sorting solutions for the paper

    The recovery of valuable paper fractions from a paper sorting waste stream has been common practice for many years. To ensure that paper sorting process detect different paper grades with greater efficiency, TOMRA Sorting has innovated and further enhanced a unique solution based on optical technology.

    By TOMRA Sorting GmbH. Distributor in CONNECTICUT (USA).

  • Premium

    Recycling sorting solutions for the fines copper

    Copper granulate, recovered by the recycling process of copper wires and cables, has the potential to be a high value resource. However, even after the removal of impurities, polymers and ferrous from the granulate, it can still contain small amounts of lead, brass or aluminum – often up to three percent. TOMRA sorting technology removes the remaining pollutants efficiently and automatically from the copper granulate – with an especially high efficiency of lead removal.

    By TOMRA Sorting GmbH. Distributor in CONNECTICUT (USA).

  • Premium

    Recycling sorting solutions for the zorba - shredded non-ferrous metals

    The value of Zorba – shredded non-ferrous metals originating from end-of-life vehicles or WEEE – continues to increase, as the demand for copper, nickel and brass created by modern lifestyles is on the rise. TOMRA’s sensor-based sorting technology can double the value of Zorba.

    By TOMRA Sorting GmbH. Distributor in CONNECTICUT (USA).

  • Premium

    Recycling sorting solutions for the wire recovery

    Previously, cable and wire materials were often lost in the treatment and sorting process, resulting in a financial loss due to the high proportion of copper they contain. TOMRA sorting technologies are capable of detecting these wires, transferring them to a metal product and then finally sorting them in a further step into a cable fraction of outstanding purity.

    By TOMRA Sorting GmbH. Distributor in CONNECTICUT (USA).

  • Premium

    Waste sorting solutions for the organic waste

    The total waste volume contains a high percentage of organic waste material. Depending on the origin country, this fraction is treated in different ways. Within the organic fraction, the inert material can cause significant problems during the different treatment processes.

    By TOMRA Sorting GmbH. Distributor in CONNECTICUT (USA).

  • Premium

    Recycling sorting solutions for the electronic scrap sorting - weee

    The growing demand for high-value, secondary raw materials makes targeted recycling increasingly attractive. In the EU alone, experts estimated over 8 million tons of disused electrical equipment in 2010. TOMRA Sorting’s goal is to utilize electronic scrap sorting to sort out pollutants as well as high-purity components.

    By TOMRA Sorting GmbH. Distributor in CONNECTICUT (USA).

  • Premium

    Waste sorting solutions for the commercial & industrial waste

    Commercial and Industrial (C&I) waste sorting separates many elements, such as plastics, paper, cardboard, and film - all of which can be effectively recycled into saleable products.

    By TOMRA Sorting GmbH. Distributor in CONNECTICUT (USA).

  • Premium

    Waste sorting solutions for the single stream recycling

    Single stream recycling, otherwise known as dry commingled waste, comprises primarily of paper and cardboard, plastic packaging waste, textiles, cans and, in some cases, glass. The demand for these secondary resources continues to rise compared with that of primary resources.

    By TOMRA Sorting GmbH. Distributor in CONNECTICUT (USA).

  • Premium

    Waste sorting solutions for the municipal solid waste (msw)

    Municipal solid waste (MSW) contains recyclable fractions, such as plastics, mixed paper, cardboard, and metals. The demand for these materials is rising, compared with that for primary resources.

    By TOMRA Sorting GmbH. Distributor in CONNECTICUT (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you