Applications in Florida

  • Premium

    Air pollution control for the printing, laminating & converting industry

    Achieving cost effective local regulatory compliance in the printing and converting industry requires a complete understanding of both regulatory standards and the printing process. Through experience, Anguil has developed unparalleled expertise in meeting your unique requirements. We understand the effects of water versus solvent-based inks on the line, elimination of odors and toxic fumes from...

    By Anguil Environmental Systems, Inc. Distributor in FLORIDA (USA).

  • Premium

    Air pollution control for the rubber curing industry

    One-time, on-site final destruction of particulates. This is the key benefit gained from an Anguil solution to the emissions generated by the rubber curing process. Other advantages of an Anguil solution include the elimination of visible blue haze, guaranteed destruction efficiency compliance, and the elimination of costly mechanical filtration media and the lingering liability issue associated with filter disposal.

    By Anguil Environmental Systems, Inc. Distributor in FLORIDA (USA).

  • Premium

    Composites and Carbon Fiber

    For Thermoplastic Composites customers MEGTEC offer process development in our R&D Center, customized roll-to-roll lines for R&D or production, in addition to our environmental compliance solutions. MEGTEC supports the development of new thermoplastic materials by providing customers a flexible pilot line for initial tests and process definition. Once a process is defined, MEGTEC will design and build the production line to meet the unique process.

    By Babcock & Wilcox MEGTEC LLC Office in Vero Beach, FLORIDA (USA).

  • Premium

    Petrochemical

    Durable regenerative thermal oxidizer (RTO) technology is at the core of our systems. MEGTEC designs and engineers system solutions to meet your special requirements, ranging from energy-efficient treatment of dilute volatile organic compound (VOC) flows, such as tank ventilation, to demanding applications utilizing VOC energy for secondary heat recovery; for example, in the form of process streams. This can include pre- and tail gas treatment systems, and could handle hazardous components such as sulphurous or...

    By Babcock & Wilcox MEGTEC LLC Office in Vero Beach, FLORIDA (USA).

  • Premium

    Wood Products

    MEGTEC is a leader in providing regenerative thermal oxidizers (RTO) for VOC control for products such as OSB, MDF, SYP, plywood, particleboard, wood pelletizing and other engineered wood products, with particular expertise in solving the problems of media plugging and alkali attack associated with wood dryer exhaust. With thousands of systems installed worldwide in many process industries, MEGTEC has the knowledge to provide you with the best solution for your specific needs. MEGTEC’s designs are modular and...

    By Babcock & Wilcox MEGTEC LLC Office in Vero Beach, FLORIDA (USA).

  • Premium

    Water Testing for Environmental Applications

    Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation`s waterways. Today, in many...

    By Myron L Company Distributor in FLORIDA (USA).

  • Premium

    Water Testing for Horticulture

    Modern growing practices include scientific evaluations of soil, water, fertilizers, diseases, etc. While some tests are best performed by a laboratory, others can be easily conducted on location, saving time and money. Three tests in particular, EC, pH, and ALKALINITY, can reveal valuable information about water quality, soil salinity, and fertilizer concentration. MyronL Company’s portable AGRI-METERS provide you with a simple, fast, and accurate means of testing these parameters.

    By Myron L Company Distributor in FLORIDA (USA).

  • Premium

    Water Testing for Textile Manufacturing

    The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated...

    By Myron L Company Distributor in FLORIDA (USA).

  • Premium

    Air pollution control for the composite & carbon fiber industry

    Anguil is intimately familiar with emission capture, control and compliance hurdles that composite and carbon fiber producers face. We specifically address the needs of our carbon fiber customers with proprietary oxidizer designs for furnace and oven emissions. Our systems are recognized for energy efficient operation and destruction capabilities by the U.S. Federal Government at their Oak Ridge National Laboratories (ORNL). Anguil continues to help producers drive down energy consumption and emission output...

    By Anguil Environmental Systems, Inc. Distributor in FLORIDA (USA).

  • Premium

    Air pollution control for ventilation air methane industry

    Ventilation Air Methane (VAM) is a Greenhouse Gas (GHG) released by coal or mineral mining operations, it is also commonly known as Coal Mine Methane (CMM).  The air pollutants from this process have a global warming potential 21 times greater than carbon dioxide, which is another well known GHG.  As alternative energy technologies have developed, methane is increasingly used to generate electricity and heat.  Landfills and mines represent two of the most abundant sources, however reports...

    By Anguil Environmental Systems, Inc. Distributor in FLORIDA (USA).

  • Premium

    Iron and Steel

    SoniCool™ Evaporative Gas Cooling & Conditioning uses a finely atomized water spray to cool EAF, BOF off-gases from over 2,400°F (1,315°C) to as low as 240°F (115°C), protecting ductwork and downstream air pollution control equipment from high temperature and sparks, while providing rapid cooling for dioxin and furan control. By optimizing humidity levels, SoniCool™ helps electrostatic precipitators. The water spray completely evaporates while cooling gases. There is no free water and no troublesome deposits in...

    By Babcock & Wilcox MEGTEC LLC Office in Vero Beach, FLORIDA (USA).

  • Premium

    Fountain Solutions

    Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriate...

    By Myron L Company Distributor in FLORIDA (USA).

  • Premium

    Water Testing for Automatic Rinse Tank Controls

    Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors...

    By Myron L Company Distributor in FLORIDA (USA).

  • Premium

    Air pollution control for the paint and paint spray industry

    In addition to tightened government regulations, paint manufacturers and paint booth owners face several unique challenges when controlling their emissions. These challenges include airflow reduction, fugitive emissions, particulate control and reducing operating costs.

    By Anguil Environmental Systems, Inc. Distributor in FLORIDA (USA).

  • Premium

    Air pollution control for the chemical processing industry

    Anguil thermal and catalytic oxidizer systems are used on various applications throughout the chemical processing industry for emission abatement. Our experience includes applications on tank vents, amine tail gases, API separators, acid gases, inert streams and more. Regulatory Compliance Guaranteed, Seamless Process Integration, Efficient Destruction Technologies, Advanced System Controls.

    By Anguil Environmental Systems, Inc. Distributor in FLORIDA (USA).

  • Premium

    Air pollution control for the food and bakery industry

    Anguil`s Food and Bakery industry experience provides reliable solutions for your emission control challenges. We have worked on a wide range of applications: achieving a high destruction level of ethanol from bakery ovens, chaff and particulate from coffee roasting, efficiently destroying grease from frying and rendering operations, handling smoke house emissions, and maintaining required opacity...

    By Anguil Environmental Systems, Inc. Distributor in FLORIDA (USA).

  • Premium

    Odor Control

    We treat air streams to remove odors allowing industrial processes to be operated in compliance with local regulations and without causing a nuisance to neighbors due to odors and smells. Our technologies have been applied to a range of processes including: Waste treatment (municipal and industrial) Manufacture of flavors Food processing Waste water treatment (Municipal and industrial) Chemical manufacture Rendering

    By Babcock & Wilcox MEGTEC LLC Office in Vero Beach, FLORIDA (USA).

  • Premium

    Reverse Osmosis Water Testing

    Osmosis is the phenomenon of lower dissolved solids in water passing through a semi-permeable membrane into higher dissolved solids water until a near equilibrium is reached. Reverse Osmosis (RO) is a membrane process of purification which removes most of the the total dissolved solids (TDS) in water by reversing the natural process of osmosis. Pressure is applied to a TDS-concentrated solution against a semi-permeable membrane, causing pure water to diffuse through the membrane. RO has become an important...

    By Myron L Company Distributor in FLORIDA (USA).

  • Premium

    Coating and Laminating

    MEGTEC’s experience and application know-how are at your command for tough drying and web handling applications such as slow-drying coatings and materials or thin film coating and laminating. Dryers can be equipped with a wide variety of nozzle configurations ranging from simple slot nozzles to sophisticated Coanda-style air bars and patented air foil systems. A full range of heat sources are available including steam, direct and indirect gas-fired, thermal oil, electric, hot water and IR. In addition, the air...

    By Babcock & Wilcox MEGTEC LLC Office in Vero Beach, FLORIDA (USA).

  • Premium

    Electronics

    In the fast-changing electronics industry with its need for new materials and products, demand for 100% uptime, smooth production operation, many in clean-room environments, MEGTEC meets and exceeds continuous demand for raising the bar of technology excellence. MEGTEC works either directly with the end user or through engineering firms or contractor companies, offering tested package systems as required and our end user list includes most of the well-known manufacturing companies around the globe including...

    By Babcock & Wilcox MEGTEC LLC Office in Vero Beach, FLORIDA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you