Applications in Georgia (US)

  • Premium

    Reverse Osmosis Water Testing

    Osmosis is the phenomenon of lower dissolved solids in water passing through a semi-permeable membrane into higher dissolved solids water until a near equilibrium is reached. Reverse Osmosis (RO) is a membrane process of purification which removes most of the the total dissolved solids (TDS) in water by reversing the natural process of osmosis. Pressure is applied to a TDS-concentrated solution against a semi-permeable membrane, causing pure water to diffuse through the membrane. RO has become an important process for a wide variety of applications including: medical, laboratory, desalination, industrial wastewater, Deionized (Dl) pretreatment, and drinking water.

    By Myron L Company Distributor in GEORGIA (US) (USA).

  • Premium

    Deionized Water Testing

    Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car wash.

    By Myron L Company Distributor in GEORGIA (US) (USA).

  • Premium

    Circuit Board Cleanliness Testing

    Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple `on line` test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L Company Ultrameter II™ 4P or 6P, a suitable container, and a mixture of Dl (deionized) water and alcohol.

    By Myron L Company Distributor in GEORGIA (US) (USA).

  • Premium

    Boiler Water Testing / Cooling Tower Water Testing

    Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can be determined by the Ryznar or Langlier indices and correlated to a conductivity or TDS range. Most people recognize problems associated with corrosion. Effects from scale deposits, however, are equally important. For example, as little as 1/8` of scale can reduce the efficiency of a boiler by 18% or a cooling tower heat exchanger by 40%!

    By Myron L Company Distributor in GEORGIA (US) (USA).

  • Premium

    Pool Water Testing / Spa Water Testing

    Anyone and everyone who is responsible for operating and maintaining a swimming pool or spa has to test, monitor, and control complex, interdependent chemical factors that affect the quality of water bathers are immersed in. Additionally, aquatic facilities operators must be familiar with all laws, regulations, and guidelines governing what these parameters should be.

    By Myron L Company Distributor in GEORGIA (US) (USA).

  • Premium

    Oxidation Reduction Potential (ORP)/Redox

    Oxidation Reduction Potential or Redox is the activity or strength of oxidizers and reducers in relation to their concentration. Oxidizers accept electrons, reducers lose electrons. Examples of oxidizers are: chlorine, hydrogen peroxide, bromine, ozone, and chlorine dioxide. Examples of reducers are sodium sulfite, sodium bisulfate and hydrogen sulfide. Like acidity and alkalinity, the increase of one is at the expense of the other.

    By Myron L Company Distributor in GEORGIA (US) (USA).

  • Premium

    Water Testing for Environmental Applications

    Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation`s waterways. Today, in many cases, there are restrictions on wastewater that is discharged to city sewer systems or to other publicly owned treatment facilities. Many jurisdictions even restrict or regulate the runoff of stormwater — affecting not only industrial and commercial land, but also residential properties as well.

    By Myron L Company Distributor in GEORGIA (US) (USA).

  • Premium

    Water Testing for Horticulture

    Modern growing practices include scientific evaluations of soil, water, fertilizers, diseases, etc. While some tests are best performed by a laboratory, others can be easily conducted on location, saving time and money. Three tests in particular, EC, pH, and ALKALINITY, can reveal valuable information about water quality, soil salinity, and fertilizer concentration. MyronL Company’s portable AGRI-METERS provide you with a simple, fast, and accurate means of testing these parameters.

    By Myron L Company Distributor in GEORGIA (US) (USA).

  • Premium

    Fountain Solutions

    Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriately wetted.

    By Myron L Company Distributor in GEORGIA (US) (USA).

  • Premium

    Water Testing for Automatic Rinse Tank Controls

    Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors have all encouraged many manufacturers and platers to invest in automatic rinse tank control systems. Many platers using automatic control systems for the first time are pleased to discover a reduction in water usage of up to 80%.

    By Myron L Company Distributor in GEORGIA (US) (USA).

  • Premium

    Water Testing for Textile Manufacturing

    The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before discharge of effluent wastes. This can be done manually with handheld instruments or automatically with in-line monitor/controllers.

    By Myron L Company Distributor in GEORGIA (US) (USA).

  • Premium

    Noise monitoring solutions for electroacoustics

    Manufacturers of electroacoustic equipment such as loudspeakers, microphones, telephones, headsets, hearing aids, hydrophones, etc., have, for many years, successfully developed new innovative acoustical designs and introduced these into the market in the form of high-quality products.

    By Brüel & Kjær Sound & Vibration Measurement A/S Office in Norcross, GEORGIA (US) (USA).

  • Premium

    Noise monitoring solutions for production testing

    The word `quality` is generally used in connection with expensive items and luxury goods. Nowadays, the quality of their product is what suppliers and sub-suppliers live by. Customers, world over, demand and expect it. In manufacturing, much effort has gone into `engineering in` quality by carefully optimising the design and production methods. However, a variety of manufacture and assembly faults often result in unacceptable noise and vibration levels in manufactured products. There is still only one method that makes absolutely sure that every item coming off the production line fulfils expectations. That method is production line testing, where every unit produced gets checked as part of its production cycle.

    By Brüel & Kjær Sound & Vibration Measurement A/S Office in Norcross, GEORGIA (US) (USA).

  • Premium

    Noise monitoring solutions for material testing

    With today`s growing focus on noise control issues and the emergence of sound quality as an important aspect of product design, acoustic material testing is becoming increasingly relevant to engineers, designers and manufacturers from a broad range of industries. Acoustic material testing is the process by which the acoustic characteristics of materials are determined in terms of absorption, reflection, impedance, and admittance, including transmission loss.

    By Brüel & Kjær Sound & Vibration Measurement A/S Office in Norcross, GEORGIA (US) (USA).

  • Premium

    Noise monitoring solutions for urban noise

    The sounds in a city are central to our quality of life. Constant exposure to noise effects both our physical and psychological health, and our ability to learn and communicate.

    By Brüel & Kjær Sound & Vibration Measurement A/S Office in Norcross, GEORGIA (US) (USA).

  • Premium

    Dosing pumps for water and wastewater treatment industry

    Peristaltic pumps are proven performers in water and waste treatment solving problems including: Dosing and metering treatment chemicals and reagents including ferric chloride (“Ferric”), sodium hypochlorite (“Hypo”), chlorine water, lime (Kalic or Kalkmilch), caustic soda, powder activated carbon and polymers, sludge transfer, filter press feeds.

    By Verderflex Peristaltic Pumps - part of the Verder Group Office in Macon, GEORGIA (US) (USA).

  • Premium

    Environmental dewatering solutions for environmental dredging

    TenCate Geotube technology helps to dewater and contain contaminated sediments in rivers, bays, harbors, marinas, ports, dock facilities, hydro basins and other waterways.  In many cases, these sediments pose significant environmental hazards, and remediation is a difficult and expensive task.

    By TenCate Geosynthetics Netherlands bv Office in Commerce, GEORGIA (US) (USA).

  • Premium

    Environmental dewatering solutions for mining and mineral processing

    TenCate Geotube technology provides cost-effective and efficient dewatering and containment in the mining and mineral processing industry. In mining and mineral processing (mine tailings, coal sludge, etc), TenCate Geotube dewatering technology enables the recovery of valuable materials, provides structural stability, improves water quality, or reduces storage footprint by sometimes 50 to 80%. Conditioners or polymers are normally used to promote flocculation to improve dewatering rates, solids retention, filtrate quality and increase in solids consolidation within the tubes.

    By TenCate Geosynthetics Netherlands bv Office in Commerce, GEORGIA (US) (USA).

  • Premium

    Geotextiles solutions for pipeline construction areas

    The world registers less than 3.5 million kms of pipelines in 120 countries. Pipelines conveying flammable or explosive material, such as natural gas or oil, pose special safety concerns. To avoid pipeline instability and damage caused by differential settlements, TenCate Geosynthetics EMEA offers you the optimum solution from its wide range of reinforcement geosynthetics: TenCate Geolon PET & PP, TenCate Miragrid GX & TenCate Rock PEC ranges.

    By TenCate Geosynthetics Netherlands bv Office in Commerce, GEORGIA (US) (USA).

  • Premium

    Geotextiles solutions for tunnel construction areas

    Quicker, easier, safer transportation means are required.  Depending on geographical zones, tunnels can be a must to reach your final destination easily. Decades of experience in tunnel constructions with TenCate Polyfelt P have shown that protection geotextiles replaces the need for drainage material around the tunnel lining.

    By TenCate Geosynthetics Netherlands bv Office in Commerce, GEORGIA (US) (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you