Applications in Georgia (US)

  • Premium

    Special orders for air purification equipment

    We are able to offer custom solutions for air purification and odor control. We can design new equipment for special orders or offer branding for existing equipment.

    By International Ozone Technologies Group, Inc. Distributor in Suwanee, GEORGIA (US) (USA).

  • Premium

    Panel mounted OEM pumps

    A large selection of panel mounted pumps and pump heads for use in Original Equipment Manufacture (OEM). These pumps are custom engineered to integrate within your own equipment whenever accurate and repeatable dosing or liquid transfer is a must. Pumps can be supplied with a range of power options including both A.C or D.C. motors.

    By Verderflex Peristaltic Pumps - part of the Verder Group Office in Macon, GEORGIA (US) (USA).

  • Premium

    Industrial solutions for manufacturing industry

    WesTech partners with manufacturing in every industry worldwide. For raw water treatment, wastewater treatment and water reclamation, process equipment supplied and manufactured by WesTech is designed to work and built to last. Design-build, plant expansions, and upgrades are each approached from a holistic view of the flow sheet and a broad base of experience in yours and other industries with similar challenges, always with an eye for efficiencies that go to the bottom line.

    By WesTech Engineering, Inc. Distributor in GEORGIA (US) (USA).

  • Premium

    Peristaltic pumps and fluid path technologies for ceramics

    All types of ceramics from fine china to brick manufacture use materials which are extremely hard on pumps. The daily wear on plant and the cost of rejected product can be enormous, and the constant need for manufacturers to drive down costs make savings in these areas vital.

    By Watson-Marlow Fluid Technology Group Distributor in GEORGIA (US) (USA).

  • Premium

    Geotextiles solutions for tunnel construction areas

    Quicker, easier, safer transportation means are required.  Depending on geographical zones, tunnels can be a must to reach your final destination easily. Decades of experience in tunnel constructions with TenCate Polyfelt P have shown that protection geotextiles replaces the need for drainage material around the tunnel lining.

    By TenCate Geosynthetics Netherlands bv Office in Commerce, GEORGIA (US) (USA).

  • Premium

    Geotextiles solutions for railway construction sector

    TenCate geosynthetics enhance the performance and the design life of railway construction structures.  For these applications, a TenCate geosynthetic is installed as separation and filter layers in areas where groundwater is a problem. TenCate geosynthetics offer the ideal characteristics of robust mechanical properties coupled with high water flow capabilities.

    By TenCate Geosynthetics Netherlands bv Office in Commerce, GEORGIA (US) (USA).

  • Premium

    Peristaltic pumps and fluid path technologies for industrial sector

    Watson-Marlow products are engineered to meet the process needs of industrial fluid pumping in a broad range of industries. Watson-Marlow peristaltic pumps have no valves, seals or glands, and the fluid only comes into contact with the bore of the hose or tube ensuring that safe containment and no contamination of the pump or the process fluid.

    By Watson-Marlow Fluid Technology Group Distributor in GEORGIA (US) (USA).

  • Premium

    Peristaltic pumps and fluid path technologies for engineering

    Watson-Marlow positive displacement pumps provide reliable and low cost transfer of fluids for the widest range of equipment and plant applications.

    By Watson-Marlow Fluid Technology Group Distributor in GEORGIA (US) (USA).

  • Premium

    Geotextiles solutions for hydraulic constructions sector

    Water is irreplaceable for life and for a great many businesses. It is a guarantee of survival and a scarce resource. Today`s society demands increasingly large volumes of increasingly high-quality water. TenCate Geosyntehtics has had a constant hand in the creation of water management infrastructure. In the last 20 years it has built more than 30 dams of a wide range of types and has used for that purpose the most modern of construction systems. TenCate filtration systems offer optimized hydraulic properties with high compression strength. Sensitive hydraulic structures - dams, dykes, canals, reservoirs - require perfect water control. Whether used to protect banks, around a drainage structure or against clay sealing cores, TenCate filtration geosynthetics achieve this level of requirement.

    By TenCate Geosynthetics Netherlands bv Office in Commerce, GEORGIA (US) (USA).

  • Premium

    Infrared temperature measurement for other industries

    Ceramics. Chemical/Petrochemical. Food/Medical/Biological. Paper/Rubber/Textiles. And more..

    By AMETEK Land Distributor in Peachtree City, GEORGIA (US) (USA).

  • Premium

    Piping & ducting solutions for the marine industry

    PROCO Products designs and manufactures durable, low-maintenance check valves for use specifically in marine industries, such as sewage treatment plants, outfalls, and tidal operations. Marine and aquatic conditions are unique and require equipment that can withstand the turbulence, wear, and corrosion that can occur. PROCO Products provides you with items that can endure even the most rigorous environments. PROCO operates worldwide, and maintains one of the largest product inventories in North America.

    By Proco Products, Inc. Office in Atlanta, GEORGIA (US) (USA).

  • Noise monitoring solutions for production testing

    The word `quality` is generally used in connection with expensive items and luxury goods. Nowadays, the quality of their product is what suppliers and sub-suppliers live by. Customers, world over, demand and expect it. In manufacturing, much effort has gone into `engineering in` quality by carefully optimising the design and production methods. However, a variety of manufacture and assembly faults often result in unacceptable noise and vibration levels in manufactured products. There is still only one method that makes absolutely sure that every item coming off the production line fulfils expectations. That method is production line testing, where every unit produced gets checked as part of its production cycle.

    By Brüel & Kjær Sound & Vibration Measurement A/S Office in Norcross, GEORGIA (US) (USA).

  • 2-Channel sound insulation for building acoustics

    Façade sound insulation is measured like sound insulation between rooms, except that one `room` is actually open space. The sound level is measured inside the receiving room and outside the façade of the building. The level difference is then corrected for the influence of the reverberation time and background noise level in the receiving room. Finally a single-number index is calculated by averaging over all the frequency bands. A loudspeaker source can be used for the measurement, giving a choice of sound incidence angle. But in practice, placing the loudspeaker and getting a high enough sound level can be difficult.

    By Brüel & Kjær Sound & Vibration Measurement A/S Office in Norcross, GEORGIA (US) (USA).

  • Noise monitoring solutions for material testing

    With today`s growing focus on noise control issues and the emergence of sound quality as an important aspect of product design, acoustic material testing is becoming increasingly relevant to engineers, designers and manufacturers from a broad range of industries. Acoustic material testing is the process by which the acoustic characteristics of materials are determined in terms of absorption, reflection, impedance, and admittance, including transmission loss.

    By Brüel & Kjær Sound & Vibration Measurement A/S Office in Norcross, GEORGIA (US) (USA).

  • Recycling Solutions for the automation industry

    ANDRITZ AUTOMATION is a leading supplier of machines and plant control systems with 65 sites worldwide. ANDRITZ AUTOMATION makes your plant effective and economical: ANDRITZ AUTOMATION stands by your plant, starting with quotation engineering, project management, hardware and software engineering, to erection work, start-up and operator training, and continuing with maintenance and engineering work for expansions and improvements. With our plant control systems and simulation and advanced control tools, we help plants become operationally ready.

    By ANDRITZ MeWa - ANDRITZ Group Office in Alpharetta, GEORGIA (US) (USA).

  • Sanding & Finishing

    Sanding & Finishing dusts are Unbreathable. Using any coated abrasive for sanding, polishing, or finishing introduces small amounts of both surfaces into the air. The particle size of the dusts produced in this application depends significantly on the abrasive’s grit size and composition, as well as the material being worked. Wood, metal, or plastics dusts each have specific health risks if inhaled. Companies involved in sanding, polishing, buffing and the use of abrasives on belt sanders, time savers and bench grinders have to deal with the buildup of significant amounts of airborne dust. Frequently, the best way of eliminating finishing dust is to try and capture it at source. Most of this abrasive work is done over a table surface, therefore a downdraft table naturally lends itself to the effective capture and collection of composite, metal, plastic, wood and many other dusts. Improving the air quality in your work space by using sanding dust collection equipment can prevent damaging lung conditions and long lasting health problems. Diversitech can provide comprehensive range of solutions including dust collectors, downdraft tables and evironmental booths to extract your sanding & finishing dust.

    By Diversitech Office in Atlanta, GEORGIA (US) (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you