Applications in North Carolina

  • Premium

    Reverse Osmosis Water Testing

    Osmosis is the phenomenon of lower dissolved solids in water passing through a semi-permeable membrane into higher dissolved solids water until a near equilibrium is reached. Reverse Osmosis (RO) is a membrane process of purification which removes most of the the total dissolved solids (TDS) in water by reversing the natural process of osmosis. Pressure is applied to a TDS-concentrated solution against a semi-permeable membrane, causing pure water to diffuse through the membrane. RO has become an important...

    By Myron L Company Distributor in NORTH CAROLINA (USA).

  • Premium

    Circuit Board Cleanliness Testing

    Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple `on line` test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L...

    By Myron L Company Distributor in NORTH CAROLINA (USA).

  • Premium

    Boiler Water Testing / Cooling Tower Water Testing

    Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level...

    By Myron L Company Distributor in NORTH CAROLINA (USA).

  • Premium

    Pool Water Testing / Spa Water Testing

    Anyone and everyone who is responsible for operating and maintaining a swimming pool or spa has to test, monitor, and control complex, interdependent chemical factors that affect the quality of water bathers are immersed in. Additionally, aquatic facilities operators must be familiar with all laws, regulations, and guidelines governing what these parameters should be.

    By Myron L Company Distributor in NORTH CAROLINA (USA).

  • Premium

    Deionized Water Testing

    Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car wash.

    By Myron L Company Distributor in NORTH CAROLINA (USA).

  • Premium

    Oxidation Reduction Potential (ORP)/Redox

    Oxidation Reduction Potential or Redox is the activity or strength of oxidizers and reducers in relation to their concentration. Oxidizers accept electrons, reducers lose electrons. Examples of oxidizers are: chlorine, hydrogen peroxide, bromine, ozone, and chlorine dioxide. Examples of reducers are sodium sulfite, sodium bisulfate and hydrogen sulfide. Like acidity and alkalinity, the increase of one is at the expense of the other.

    By Myron L Company Distributor in NORTH CAROLINA (USA).

  • Premium

    Water Testing for Automatic Rinse Tank Controls

    Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors...

    By Myron L Company Distributor in NORTH CAROLINA (USA).

  • Premium

    Water Testing for Textile Manufacturing

    The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated...

    By Myron L Company Distributor in NORTH CAROLINA (USA).

  • Premium

    Fountain Solutions

    Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriate...

    By Myron L Company Distributor in NORTH CAROLINA (USA).

  • Premium

    Water Testing for Horticulture

    Modern growing practices include scientific evaluations of soil, water, fertilizers, diseases, etc. While some tests are best performed by a laboratory, others can be easily conducted on location, saving time and money. Three tests in particular, EC, pH, and ALKALINITY, can reveal valuable information about water quality, soil salinity, and fertilizer concentration. MyronL Company’s portable AGRI-METERS provide you with a simple, fast, and accurate means of testing these parameters.

    By Myron L Company Distributor in NORTH CAROLINA (USA).

  • Premium

    Water Testing for Environmental Applications

    Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation`s waterways. Today, in many...

    By Myron L Company Distributor in NORTH CAROLINA (USA).

  • Premium

    Special orders for air purification equipment

    We are able to offer custom solutions for air purification and odor control. We can design new equipment for special orders or offer branding for existing equipment.

    By International Ozone Technologies Group, Inc. Distributor in Raleigh, NORTH CAROLINA (USA).

  • Premium

    Cleaning process for water intake

    By Acme Engineering Prod. Ltd. Distributor in Raleigh, NORTH CAROLINA (USA).

  • Premium

    Odor Control for Disaster Restoration and Cleanup

    Total Zone Ozone Generators and Titan Hydroxyl Generators are used by restoration and remediation professionals to help bring properties back to normal after a disaster. Ozone Generators and Hydroxyl Generators are used to purify the air and eliminate

    By International Ozone Technologies Group, Inc. Distributor in Raleigh, NORTH CAROLINA (USA).

  • Premium

    Odor Eliminator

    Titan Hydroxyl Generators and Total Zone Ozone Generators are used to eliminate odors.

    By International Ozone Technologies Group, Inc. Distributor in Raleigh, NORTH CAROLINA (USA).

  • Premium

    Recycling equipments for ferrous scrap metal shredding & recycling

    Ferrous scrap metal includes metals that can be reclaimed for use through traditional ferrous scrap recovery systems. These metals include a wide variety of light ferrous scrap such as sheet steel, 55 gallon drums, white goods, and other forms of loose tin. Heavier ferrous scrap can be processed through the Saturn hammermill line of shredders which also produce a more consistent, higher density shred. Shredders prepare the metals for further separation or directly to end ferrous scrap consumers. Additional...

    By Granutech-Saturn Systems Distributor in Hendersonville, NORTH CAROLINA (USA).

  • Premium

    Recycling equipment for industrial paper & wood shredding

    Our industrial paper shredders are designed to process paper, cardboard, and pulp waste. The shredded material is then used to manufacture new products, enabling manufacturers to efficiently recycle paper products. In addition, industrial paper shredders are used to ensure secure and total destruction of documents.

    By Granutech-Saturn Systems Distributor in Hendersonville, NORTH CAROLINA (USA).

  • Premium

    Recycling equipments for shredding & reducing medical waste

    Shredding and reducing medical waste poses special challenges. Processing must meet stringent regulatory standards for the safe handling of infectious and red bag waste, including precise size reduction to ensure proper sterilization. In addition, the waste is comprised of many different materials, ranging from sharps to textiles, requiring shredders that can effectively process the variety of materials.

    By Granutech-Saturn Systems Distributor in Hendersonville, NORTH CAROLINA (USA).

  • Premium

    Meteorological monitoring

    A range of traditional manually read instrumentation for the measurement of surface meteorological parameters.

    By Casella Distributor in NORTH CAROLINA (USA).

  • Premium

    Precipitation measurement

    From simple manual rainfall collection devices, electronic tipping bucket rain gauge sensors, through to fully autonomic stand alone data logging systems with telemetry for hydrological network applications.

    By Casella Distributor in NORTH CAROLINA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you