Applications in South Dakota

  • Premium

    Fountain Solutions

    Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriately...

    By Myron L Company Distributor in SOUTH DAKOTA (USA).

  • Premium

    Water Testing for Environmental Applications

    Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation`s waterways. Today, in many...

    By Myron L Company Distributor in SOUTH DAKOTA (USA).

  • Premium

    Water Testing for Horticulture

    Modern growing practices include scientific evaluations of soil, water, fertilizers, diseases, etc. While some tests are best performed by a laboratory, others can be easily conducted on location, saving time and money. Three tests in particular, EC, pH, and ALKALINITY, can reveal valuable information about water quality, soil salinity, and fertilizer concentration. MyronL Company’s portable AGRI-METERS provide you with a simple, fast, and accurate means of testing these parameters.

    By Myron L Company Distributor in SOUTH DAKOTA (USA).

  • Premium

    Reverse Osmosis Water Testing

    Osmosis is the phenomenon of lower dissolved solids in water passing through a semi-permeable membrane into higher dissolved solids water until a near equilibrium is reached. Reverse Osmosis (RO) is a membrane process of purification which removes most of the the total dissolved solids (TDS) in water by reversing the natural process of osmosis. Pressure is applied to a TDS-concentrated solution against a semi-permeable membrane, causing pure water to diffuse through the membrane. RO has become an important...

    By Myron L Company Distributor in SOUTH DAKOTA (USA).

  • Premium

    Circuit Board Cleanliness Testing

    Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple `on line` test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L...

    By Myron L Company Distributor in SOUTH DAKOTA (USA).

  • Premium

    Oxidation Reduction Potential (ORP)/Redox

    Oxidation Reduction Potential or Redox is the activity or strength of oxidizers and reducers in relation to their concentration. Oxidizers accept electrons, reducers lose electrons. Examples of oxidizers are: chlorine, hydrogen peroxide, bromine, ozone, and chlorine dioxide. Examples of reducers are sodium sulfite, sodium bisulfate and hydrogen sulfide. Like acidity and alkalinity, the increase of one is at the expense of the other.

    By Myron L Company Distributor in SOUTH DAKOTA (USA).

  • Premium

    Pool Water Testing / Spa Water Testing

    Anyone and everyone who is responsible for operating and maintaining a swimming pool or spa has to test, monitor, and control complex, interdependent chemical factors that affect the quality of water bathers are immersed in. Additionally, aquatic facilities operators must be familiar with all laws, regulations, and guidelines governing what these parameters should be.

    By Myron L Company Distributor in SOUTH DAKOTA (USA).

  • Premium

    Deionized Water Testing

    Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car wash.

    By Myron L Company Distributor in SOUTH DAKOTA (USA).

  • Premium

    Water Testing for Automatic Rinse Tank Controls

    Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors have...

    By Myron L Company Distributor in SOUTH DAKOTA (USA).

  • Premium

    Boiler Water Testing / Cooling Tower Water Testing

    Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can...

    By Myron L Company Distributor in SOUTH DAKOTA (USA).

  • Premium

    Water Testing for Textile Manufacturing

    The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before...

    By Myron L Company Distributor in SOUTH DAKOTA (USA).

  • Premium

    Process heating for commercial and industrial functions

    By Acme Engineering Prod. Ltd. Distributor in Sioux Falls, SOUTH DAKOTA (USA).

  • Premium

    Effluent cleaning for wastewaters

    By Acme Engineering Prod. Ltd. Distributor in Sioux Falls, SOUTH DAKOTA (USA).

  • Premium

    Solutions for potable water treatment

    Outstanding water quality in line with global WHO standards. ProMinent turns water into hygienically perfect potable water – with powerful systems and components, which can be ready mounted for operation or individually configured.

    By ProMinent GmbH Distributor in SOUTH DAKOTA (USA).

  • Premium

    Solutions for waste water treatment

    Very low-impact treatment for waste water. Our water treatment technology delivers thorough yet environmentally friendly waste water treatment. What`s more, with precisely metered additives and optimised processes, you also save money.

    By ProMinent GmbH Distributor in SOUTH DAKOTA (USA).

  • Premium

    Water treatment solutions for swimming pool water treatment

    Modern disinfection procedures improve swimming enjoyment. Our UV and ozone systems make swimming pool water hygienically pure. In addition to conventional disinfection with chlorine, unpleasant smells are also avoided, for example.

    By ProMinent GmbH Distributor in SOUTH DAKOTA (USA).

  • Premium

    Water treatment solutions for utility water treatment

    It makes economic sense to reuse process water. Why would you discharge water just because you`ve used it once? If this water is treated properly, it can be reused with ease, cutting costs in no time.

    By ProMinent GmbH Distributor in SOUTH DAKOTA (USA).

  • Premium

    Water treatment solutions for oil and gas industry

    "Made in Germany" for the global oil and gas industry. ProMinent`s tailored products are made in Germany. Designed as complete solutions and manufactured in-house, they are quickly ready for use (up-, mid- and downstream).

    By ProMinent GmbH Distributor in SOUTH DAKOTA (USA).

  • Premium

    Water treatment solutions for energy generation industry

    Powerful components for power plants. ProMinent solutions simplify everything: even complex power plant systems are optimally organised through a combination of our pumps and metering systems.

    By ProMinent GmbH Distributor in SOUTH DAKOTA (USA).

  • Premium

    Water treatment solutions for beverage industry

    Metering and disinfection for the beverage industry. Disinfection processes are essential for smooth, hygienic operations. ProMinent offers solutions suitable for the entire production and bottling section. And the good news is that this investment pays off in no time.

    By ProMinent GmbH Distributor in SOUTH DAKOTA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you