Applications
-
Premium
Respirometry solutions for composting sector
Respirometry solutions for composting ...
By Challenge Technology based in Springdale, ARKANSAS (USA).
-
Premium
Industrial filtration solutions for the refinery industry
Industrial filtration solutions for the refinery ...
By Hilliard Corporation based in Elmira, NEW YORK (USA).
-
Premium
Atomic absorption spectrometry for refineries
By Analytik Jena - an EndressHauser Company based in Jena, GERMANY.
-
Premium
Smoke generator device for large scale external exercises and tunnel testing
Making smoke in a very open environment or external environment can be a challenging! An oil-based smoke generator, such as a ViCount system, can produce dramatically more artificial smoke than multiple water based systems. This is due to the fact that the smoke ViCounts produce, being oil-based, does not evaporate in the same way and speed that water-based smoke does. The smoke from a ViCount smoke generator will travel for 1000's of meters, compared to a typical water based smoke machine that may produce a ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
Premium
Respirometry System for Biomass Activity Testing
Pulse-Flow respirometers can be used to assess biomass activity for aerobic and anaerobic reactions. In aerobic tests, cultures are combined with nutrients, trace minerals, and an organic substrate – such as acetic acid or ethanol. The maximum oxygen uptake rate reflects the amount of active biomass in the test culture. Examples are shown ...
By Respirometer Systems and Applications, LLC (RSA) based in Fayetteville, ARKANSAS (USA).
-
Premium
Waste Treatment Solution for Mixed Construction Waste and Decoration Waste (C&D Waste)
Landfills and stock dump for construction and decoration waste in which there is more than 5% of slag and more than 8% of ...
By Suzhou Jono Environmental Technology Co., Ltd based in Suzhou, CHINA.
-
Premium
Monitors and analysers for Speciality metals industry
Encompassing a number of alloys and less common metals, the speciality metals industry relies on accurate and stable temperature measurements at key points in their processing. Temperature monitoring within these industries benefits the furnace operations involved in the commercial production processes used in the refining of speciality metals, such as copper and platinum. With many years of experience in providing non-contact temperature measurement solutions to metal processing industries, AMETEK Land’s ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
-
Premium
Ozone generators for health application
Ozone therapy was found to be efficient, easy to use, ensuring good tolerance and no sideeffects. According to the chosen therapeutic concentration ozone can produce its immune-modulating, anti-inflammatory, bactericidal, virucidal, fungicidal, analgesic and other ...
By Absolute Ozone® based in Edmonton, ALBERTA (CANADA).
-
Premium
Flame Photometer for Calcium in Unashed Plant Leaves
This procedure uses a TCA (trichloroacetic acid) extraction of the tissue to release all of the ...
By BWB Technologies Ltd. based in Newbury, UNITED KINGDOM.
-
Premium
Steelmaking process monitoring by Direct MS
Steel, an alloy of iron and carbon (up to 2% of weight), is one of the most widely used construction materials. It is produced by Basic Oxygen Steelmaking (BOS) in a converter : oxygen is blown to form carbon monoxide (CO) and carbon dioxide (CO2) with the carbon excess of molten pig iron. Other chemical elements (such as nitrogen) that may decrease the efficiency of furnace are also removed. Finally, oxygen is replaced by an inert gas (Ar) to minimize the ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Determination of water-soluble forms of inorganic cations in soils, clays, peat, wastewater silt, activated sludge, and bottom sediments
Introduction The content of water-soluble forms of inorganic cations (ammonium, potassium, calcium, sodium, magnesium) is one of the substantial characteristics in agrochemical, land reclamation, and sanitary assessments of soils (arable, hayland, pasturable, forest nursery soils). The cation balance should be controlled during ecological soil monitoring for the human activity impact ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Chemical Water Treatment for cooling and processing water
Innovative solutions to prevent corrosion, deposits and microbiology. An optimal heat transfer is the most important point in every water-cooled process. Scale, corrosion and biofouling negatively affect the heat transfer. Therefore Kurita develops customised solutions for cooling and process water systems, based on the combined treatments of scale & fouling prevention, corrosion inhibition, and ...
By Kurita Water Industries Ltd based in Tokyo, JAPAN.
-
Premium
Erosion and dust control solutions for heavy haul road stabilizer sector
Used on heavy haul roads, Envirotac prevents dust, wear, and erosion. Further, it helps saving water, preventing equipment damage due to dust, preventing loss of tire tread due to road wear and reducing emissions from equipment that would normally be used to maintain the ...
By Environmental Products & Applications, Inc. based in La Quinta, CALIFORNIA (USA).
-
Premium
Advanced resource recovery & purification solutions for hydrometallurgy sector
Eco-Tec Recovery Systems offer a simple, economical approach to purifying acid bleed streams, allowing their recycle and reuse. The separated metals can then be cost effectively reclaimed following acid-purification treatment. For years, electrorefining and electrowinning operations wishing to produce high-purity copper have relied on Eco-Tec’s Systems to continually remove metal impurities from copper and zinc electrolyte bleed streams. The purified acid can then be recycled back to the tank house. This ...
By Kovalus Separation Solutions, Inc. based in Wilmington, MASSACHUSETTS (USA).
-
Premium
Respirometry solutions for industrial waste treatability industry
Test Setup: 40 and 60 mL of wastewater were added to individual respirometer flasks each containing nutrient/mineral/buffer medium to form two different dilutions. TCMP was added to inhibit nitrification. 25 mL of seed from a laboratory scale reactor was added to each test reactor. Oxygen uptake was monitored using a CHALLENGE AER-200 respirometer for five days. A second dose of 40 and 60 mL of leachate sample was then added to each reactor and oxygen uptake was measured for another 5 ...
By Challenge Technology based in Springdale, ARKANSAS (USA).
-
Premium
Flame Photometer for Determination of Na and K using Emulsions and Microemulsions for Sample Preparation
This technique allows use of aqueous standards for calibration rather than relatively unstable organometallic standards and harmful solvents for the extraction. Microemulsions are thermodynamically stable systems composed of water, oil and surfactant. In some cases, an alcohol is added as a ...
By BWB Technologies Ltd. based in Newbury, UNITED KINGDOM.
-
Premium
Portable NH3 Gas Analyzer for Testing NH3
Applications:Testing NH3 content data of denitrification outlet 50-120PPM and desulfurization outlet 70ppm of No.1 production line. Testing NH3 Content Data at Desulfurization Export of No.2 Production Line. ...
By Enviro Solutions Technology Co.,Ltd based in Wuhan, CHINA.
-
Premium
Ceramic membranes and pressure vessels for biotechnology / chemical industry
In chemical and biotechnological applications, we use our ceramic membranes successfully for protein concentration, cell separation, recovery of catalysts, filtration of dyestuffs, and ...
By atech innovations gmbh based in Gladbeck, GERMANY.
-
Premium
Gas detection in water & waste industry
Wastewater and potable water treatment facilities produce and use various toxic and explosive gases such as methane, hydrogen sulfide, ammonia, carbon dioxide, carbon monoxide, chlorine, ozone, etc. In addition, in confined spaces, the increased formation of toxic gases and the decreased concentration of oxygen make these areas particularly dangerous for workers. The risk can be evaluated by measuring worker exposure to various pollutants present in the air in work areas. The measured concentrations are then ...
By Teledyne Gas and Flame Detection based in Arras Cedex, FRANCE.
-
Premium
Industrial wastewater treatment for the mechanical industry
Industrial wastewater treatment for the mechanical ...
By C&G Depurazione Industriale S.r.l. based in Rignano S.Arno (Firenze), ITALY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you