Anaerobic Winery Waste Water Treatment Case Study

0
- By:

Courtesy of Integrated Engineers Inc.

Industrial Wastewater Treatment Success Stories

Anaerobic Winery Waste Water Treatment

Great Jar Test Results for Winery Digester Effluent

The winery wastewater effluent from the Anaerobic Digester was tested with the Floccin 1115 for reduction in suspended solids.

The initial pH was measured at 6.2. A dosage of 0.5 and 0.8 grams/1,000 ml of wastewater were tested with the results as shown below. At a dosage of 0.5 gram/1,000, the suspended solids were reduced from 750 ppm to 74 ppm. The dosage of 0.8 grams/1,000 ml dropped the suspended solids from 750 ppm to less than 20 ppm. At a dosage of 0.5 gram/1,000 ml, full scale Floccin usage to treat 2 MGD (million gallons/day) would be 1,000 lbs.


Bus Washing Facility Waste Water Treatment Before After Jar Test Using Floccing 1105 Flocculating Agent

The Floccin wastewater solids settled rapidly within 30 seconds, so clarification is the process selected versus dissolved air floatation.


Obtain Your Evaluation...Get Started

Customer comments

No comments were found for Anaerobic Winery Waste Water Treatment Case Study. Be the first to comment!