IWA Publishing

Applicability of an electrochemical Fenton-type process to actual wastewater treatment


Courtesy of Courtesy of IWA Publishing

The applicability of an electrochemical Fenton-type process (EF-HOCl-ReFe) to the treatment of three actual wastewaters, namely wastewater from an automobile factory (automobile wastewater), metal scrap-cleansing wastewater, and municipal wastewater, is discussed in this research. The EF-HOCl-ReFe successfully removed the chemical oxygen demand (COD) from automobile wastewater pre-treated by a coagulation process without any inhibition. The apparent current efficiency reached 86%, 46% of which was ascribed to the electrochemical Fenton-type mechanism. The metal scrap-cleansing wastewater had a yellow colour and high concentrations of COD (6550 mg/L) and Cl (1560 mM). The EF-HOCl-ReFe could achieve almost complete COD removal and decolourization after 48 h of treatment, although a temporary intensification of colour was observed before the decolourization. The EF-HOCl-ReFe was also effective in the removal of 1,4-dioxane from municipal wastewater pre-treated by activated sludge and coagulation processes, which were unable to remove 1,4-dioxane. The 1,4-dioxane removal efficiency after 30 min of treatment reached 68.5%. Thus, the EF-HOCl-ReFe was applicable to the treatment of these actual wastewaters.

Customer comments

No comments were found for Applicability of an electrochemical Fenton-type process to actual wastewater treatment. Be the first to comment!