Henan DOING Renewable Energy Equipment Co.,ltd

Automatic wire stripping machine


Automatic wires stripping machine is an environmentally friendly machine in recycling waste copper wire ,If you have large quantities of waste copper wires to process,the automatic wire stripping machine will bring much more profit for you!

Automatic wire stripping machine working process

1.    Starting

Please make sure all the machines and electrical equipments are in good condition. Then start the machine, and keep the machine running unloaded for 5-10 minutes before feeding.

Boot sequence: suction fan1→suction fan 2→blower-feeding blower →riddler→mainframe.
Shutdown sequence: Riddler→blower→suction fan1→suction fan 2→feeding blower→mainframe

2. Feeding

Before feeding, pick up the debris especially the iron from the wires in case of the damage to the crusher blades. During the feeding period, the feeding speed should be in accordance with the crushing speed.

3. Fine crushing

If there is any abnormal noise, please stop and check the crusher, or change different size screen.

If there is too much copper or the produced particles are relatively small during the production process, replace the screen and adjust the distance between the fixed knife and the moving one.

If the machine is easy to overheat, stop the device and inspect the gearing.

4.Vibrating separator

After crushed, the mixed material will be delivered to vibrating device. The copper from vibrating separator is complete copper without plastic, while the copper clad from the opposite discharging hole needs the second crushing.

1. Wide Application: Automatic wire stripping machine is designed to recycle various kinds of copper wire and cables with diameter between 0.2-20 mm.

Contact: Ms Bonnie
Phone: +86-371-5677 1821
Skype: bonniezhao2
Email: market@doinggroup.com

Customer comments

No comments were found for Automatic wire stripping machine. Be the first to comment!