Case study - Drinking water treatment in a hospital with ca. 200 beds

0

Courtesy of Aquadron

Aquadron FXL

Data:
Reading-controlled dosing in hot water. Cold water consumption of approximately 35 m3/d. Hot water consumption of approximately 20 m3/d. Pipe material: galvanized steel, stainless steel.

Features:
Many drinking water points throughout the building, corrosion and joint problems due to high hot water temperature.

Warm Water Treatment in Hospital with Ca. 200 Beds

Aquadron FXL

Data:
Hot water consumption of approximately 20 m3/d. Pipe material: galvanized steel.

Features:
Water system was designed for larger consumption, thus oversized lines and stagnation, no microbiological safety despite high hot water temperatures.

Warm Water Treatment in Hospital with Ca. 120 Beds

Aquadron FXL

Data:
Hot water consumption of approximately 13m3/d. Pipe material: galvanized steel.

Features:
Wide branched duct system, oversized lines, stagnation, thermal treatment of hot water treatment requires high demand for energy and personnel.

Customer comments

No comments were found for Case study - Drinking water treatment in a hospital with ca. 200 beds. Be the first to comment!