Enhancement of struvite pellets crystallization in a full-scale plant using an industrial grade magnesium product
A full-scale struvite crystallization system was operated for the treatment of the centrate obtained from the sludge anaerobic digester in a municipal wastewater treatment plant. Additionally, the feasibility of an industrial grade Mg(OH)2 as a cheap magnesium and alkali source was also investigated. The struvite crystallization plant was operated for two different periods: period I, in which an influent with low phosphate concentration (34.0 mg P·L−1) was fed to the crystallization plant; and period II, in which an influent with higher phosphate concentration (68.0 mg P·L−1) was used. A high efficiency of phosphorus recovery by struvite crystallization was obtained, even when the effluent treated had a high level of alkalinity. Phosphorus recovery percentage was around 77%, with a phosphate concentration in the effluent between 10.0 and 30.0 mg P·L−1. The experiments gained struvite pellets of 0.5–5.0 mm size. Moreover, the consumption of Mg(OH)2 was estimated at 1.5 mol Mg added·mol P recovered−1. Thus, industrial grade Mg(OH)2 can be an economical alternative as magnesium and alkali sources for struvite crystallization at industrial scale.
Customer comments
No comments were found for Enhancement of struvite pellets crystallization in a full-scale plant using an industrial grade magnesium product. Be the first to comment!