Green Roofs - Case Study
The green roofs of the buildings are completely covered with vegetation. In event of a leakage in its sealing system, its technically very difficult or in some cases even impossible to locate and repair the leakage. For that reason we developed a Sensor DDS system which is permanently implemented into the roof design.
Solution for flat roofs – SENSOR DDS technology
The most used and effective way of testing the liner integrity on green roofs is survey using SENSOR DDS technology. As the technology is based on the distribution of geoelectrical field below and above the liner the problem could be presence of the thermoisolation which is non-conductive.
For that reason Sensor has developed the Sensor leak detection geotextile which is installed below the PVC, TPO, bitumenous or other non-conductive geomembrane. It is a direct replacement of standard geotextile so no additional installation is needed.
Sensor leak detection geotextile is installed as standard geotextile with overlap of minimum 100mm. Please see the gallery below for details of installation.
After intallation of geomembrane we can now test its integrity using SENSOR DDS MIT portable Arc Testing device. In this step we have eliminated every pinhole found on flat area or corners.
As a next step a drainage gravel layer was careful installed on top of the tested roof liner. Final test of geomembrane integrity was completed using our SENSOR DDS Mobile dipole testing kit which identified small damage made by sharp stone when placing overliner.
Where permanent 24/7 monitoring of the roof waterproofing is required we install SENSOR DDS RFM system. This sophisticated Sensor system consists of buried components called Sensor tiles which divide the monitoring area into sectors. Each sector is monitored permanently in real time what can be seen on the touch screen of control panel inside the building.
In event of a leak system automatically triggers an alarm and informs the client via SMS/Email. Identified sector is displayed also on the Sensor control panel’s screen. Precise localisation of the leak within the detected sector is made using Sensor’s dipole system SENSOR DDS Mobile or SENSOR DDS MIT Arc Tester.