How to Prevent the Corrosion in the Tanks of Dung Truck?
The widespread use of dung suction trucks has dramatically increased the effectiveness that sanitation staffers. It's more simple and quicker for sanitation employees to clear the septic tanks, sewers and sludge. However, we'll also confront a variety of problems during the process of using the truck for removing dung. For instance, the corrosion in the tank that houses the dung machine causes a decrease in the lifespan for the suction vehicle.
As we are all aware, carbon steel is extensively used in the construction of tanks for the body parts of the dung sucking vehicle. Its thickness for the body of smaller and moderate dung suction trucks typically is five centimeters or six centimeters. In contrast, it is the same for the body of the larger dung suction truck is usually eight centimeters. Its tank bodies of a dung suction trucks is primarily dependent upon its material which is the resistance to corrosion of carbon steel. Due to the corrosive nature of Fecal sludge and the acidity and turbidity that rusts from water, oxygen and temperature, as well as the pressure strain from suction and sewage and sewage, it is not uncommon for the tank in the dung suction vehicle typically has damaged and damaged after use for 4 to 5 years. What is the best solution to prevent the corrosion of this tank on the vehicle? Yes, it is.
1. 1. When creating the tank body of Hubei dung suction trucks, we use premium carbon steel plate top-quality carbon steel plate that is more resistant to corrosion and naturally will have an longer time to service.
2. Spray anticorrosive coating to the inner tank in the suction vehicle. Anticorrosive coatings are effective in preventing corrosion. Typically, the Tank body in the dung sucking machine equipped with anti-corrosion coatings is two years longer lifespan than the tank that doesn't have a protective coating. Some suggest that spraying a layer anticorrosive paint to the interior of the tank may also provide anticorrosive effects. The current world's paint that is rust-proof is typically acid paint, whereas the sludge and the feces taken in by the dung suction trucks are alkaline. The mixture with acids and the alkali produces chemical reactionthat causes the breakdown of paint that is acid-rust-proof. So, spraying anticorrosive paint is the most effective method.
3. When that the suction operation on the vehicle is complete, it has to be cleaned out in a timely manner. Get rid of any remaining impure substances in the tank at time to prevent any residual impurities from corroding and damaging the tank of and the truck for dung. Cleaning the tank and dry both inside and the outside is a good method of reducing corrosion.
4. Avoid prolonged exposure to sun in order not to damage the paint on the tank and result in the loss of paint. If you notice scratches on the paint on the tank fix them promptly so that you can avoid corrosion of the tank.
5. Inspections on a regular basis and regular maintenance on the tank must be performed. If it is determined that the tank is suffering from an issue with rust penetration It is essential to fix the corrosion promptly. Only after repair will it not impact the effects for the truck that sucks dung.
The suction tank forms the primary part of the suction truck as well as the tank for the sewage waste, and the principal material for creating vacuum suction. Thus, the care and maintenance of suction tanks takes up significant space when it comes to the maintenance of the suction truck that requires the care of every car owner.