4-gas combustion analyzer Articles

  • AMETEK THERMOX Introduces the WDG-V Combustion Analyzer

    Abstract AMETEK THERMOX Introduces the 5th Generation THERMOX Combustion Gas Analyzer in a CONTROL Magazine Exclusive. WDG analyzers are based on a zirconium oxide cell that provides a reliable and cost-effective solution for measuring excess oxygen in flue gas as well as CO and methane levels.  Information from the Gas Analyzer allows operators to obtain the highest ...

  • Application of combustion analyzers in safety instrumented systems

    The combustion process has always been considered having the potential for a hazardous event which could lead to personnel injury or loss of production. To mitigate this risk, the process industry is now implementing Safety Instrumented Systems which can identify hazardous operating conditions and correctly respond in such a way to bring the combustion process back to a safe operating condition ...

  • 5th-Generation Thermox WDG Flue Gas Combustion Analyzer

    "For more than 40 years, we have been a leader in combustion gas analysis," says Mike Fuller, divison VP of sales and marketing and business development for Ametek Process Instruments, "and we believe the WDG-V is the combustion analyzer of the future." WDG analyzers are based on a zirconium oxide cell that provides a reliable and cost-effective solution for measuring excess oxygen in flue gas as ...

  • Introducing LaserGas III SP CO – a combustion analyzer for rough environments

    NEO Monitors unveils the industry’s most compact CO combustion analyzer suitable for the most demanding environments. LaserGas III CO includes measurement of CH4, H2O and temperature in one single unit designed to reduce risk. Based on decades of experience and customer feedback, NEO Monitors has designed an Ex-d certified tunable diode laser (TDLS) analyzer. The instrument is ...


    By NEO Monitors AS

  • FTIR resolution requirements for industrial gas analyzers

    FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...


    By CIC Photonics, Inc.

  • Combustion optimization by fast excess air control – Case Study

    Combustion is the conversion of primary chemical energy contained in fuels into heat through the process of oxidation at high temperatures. The oxygen required for the combustion is supplied as part of the combustion air that is fed to the process. In ideal (stoichiometric) combustion the amount of oxygen supplied to the process is just sufficient to burn all combustibles completely. In real ...

  • Forklift Emissions Analyzers

    Forklifts are commonly used in warehouses of various size and capacity for the movement and shipping of goods; however, the unoptimized engines can produce excess quantities of silent and deadly CO gas that can risk the health and safety of the workers. When forklifts are brought in for service usually the CO gas isn't measured. If the CO gas isn't measured and the engine properly optimized then ...

  • FTIR resolution requirements for industrial gas analyzers

    FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...


    By CIC Photonics, Inc.

  • Catalytic Exhaust Emission Control of Small Internal Combustion Engines

    ABSTRACT Gaseous emissions present in the engine exhaust of on-road motor vehicles are subject to stringent exhaust emission 2ontrol standards for carbon monoxide (CO), hydrocarbons, and ...


    By DCL International Inc.

  • MAXUM edition II - Total sulfur analyzer – Case Study

    To comply with environmental regulations in the production of low-level sulfur fuel, it is necessary to get reliable information about the product quality and sulfur content. The Siemens Maxum II, Total Sulfur on-line process gas chromatograph, provides this information in reliable manner using process suitable analytical procedures. The Total Sulfur solution applies a continuous sample ...

  • Why You Should Consider a Sample Conditioning Unit for Taking Low NOx Measurements When Using a Portable Emissions Analyzer

    Using state-of-the-art technology, we here at E Instruments create high-quality portable industrial combustion gas and emissions analyzers that are capable of taking precise, low NOx measurements for both NO and NO2. In particular, we recommend our sample conditioning unit to those of you who need to take accurate, low NOx or SO2 ...

  • Comparative Evaluation of Test Methods for Reciprocating Engines; EPA Reference Methods vs. Portable Analyzer

    Abstract This is a comparative evaluation of errors in testing engines using reference methods and portable analyzers. New Mexico Environment Department (NMED) Air Quality Bureau has published a guidance document, Standard Operating Procedure (SOP), Use of Portable Analyzers in Performance Tests. EPA provides guidance on reference method testing in 40 CFR 60, Appendix A. This document is ...


    By Trinity Consultants

  • SITRANS SL in-situ analyzer saves cost for a steel plant replacing existing extractive setup – Case Study

    The customer Steel industry plants all over the world have multiple processes, most of them emitting CO and CO2 in very high concentrations (tens of %). CO is used as a combustible due to its high calorific value. It is stored in a huge tank before it is used by the power plant next door. CO in such high concentration is explosive in presence of a few molecules of oxygen. Therefore, ...

  • PureAire Oxygen Analyzer for 3D Printers: How Argon is used and Why O2 Detection is Required

    Thanks to new technologies, the 3D printers that have been used to create plastic three-dimensional objects can now print metal. Titanium 3D printing is possible thanks to a technique called DMLS, or Direct Metal Laser Sintering. While the potential to use titanium 3D printing is groundbreaking for many industries, the new advances could pose a health hazard if volatile gases used in the printing ...

  • Biofuels Gas Monitoring

    The Customer The Company is one of the world’s leading developers and producers of advanced fuels and green chemicals. The Process The Company uses a gasification process that breaks down wood chips, waste and other feedstock using plasma technology. The process produces a uniform synthetic gas (syngas) that is used to power their turbine engines. ...

  • Natural Gas Processing Case Study

    The Customer The Company is an exploration and production company that builds natural gas reserves through the acquisition and development of oil and gas assets across the U.S. They are one of the largest producers of natural gas in the Nation. The Process The Company uses multiple scrubbers to clean out the impurities of the natural gas that they ...

  • New gas calibration method eases TOC analysis

    LAR Process Analysers AG of Berlin,  Germany expanded the range of feaiures of its measuring device QuickTOC, which facilitates the monitoring of ultra pure and cooling water, boiler feed and condensate measurement, and industrial wastewaters. For many years, the Berlin company lias been developing, high quality measuring devices and processes for the TOC analysis of condensates and boiler ...


    By LAR Process Analysers AG

  • Selecting and Placing Gas Detectors for Maximum Application Protection

    Many industrial processes involve dangerous gases and vapors: flammable, toxic, or both. With the different sensing technologies available, and the wide range of industrial applications that exist, selecting the best sensor and locating them properly for the job at hand can be a challenge. To ensure a high level of safety, know the latest sensing technologies, which technology is best for the ...

  • Developing Technologies to Detect Hydrogen Sulfide (H2S) Gas

    Abstract Hydrogen sulfi de (H2S) gas can cause nausea, headaches, unconsciousness, and death. Industries struggle to detect this deadly substance before it harms workers or communities. Safety system manufacturers have developed detectors that sense the H2S quickly and accurately. This paper illustrates, in general terms, considerations in effective placement of H2S detectors: ...

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you