acidic membrane cleaner Articles

  • Micro-90 Effective Filter Membrane Cleaner for Wastewater Treatment Operations

    The care and cleaning of filter membranes is essential to the success of many water treatment systems.  International Products Corporation (IPC) manufactures a line of membrane cleaners effective at restoring 100% flux at safe pH ranges.  One of IPC’s customers treats industrial wastewater generated by the engine plant of a major automotive ...

  • The Chemistry of Membrane Cleaning

    International Products Corporation (IPC), incorporated in 1923, manufactures specialty chemicals. IPC has over 30 years experience making and selling membrane cleaners and formulated lubricants to industry. IPC is the proud recipient of the 2013 Environmental Innovation award by the Suppliers Partnership for the Environment. All products are manufactured in the New Jersey headquarters and are ...

  • White Paper - Four Membrane Cleaning Profile

    Four Membrane Cleaning Profiles With Micro-90® Alkaline Cleaning Solution, Micro® Green Clean Biodegradable Cleaner And Micro® A07 Citric Acid Cleaner SUMMARY Fouling and cleaning profiles of four types of filter membranes were obtained using MICRO-90®, MICRO® GREEN CLEAN and/or MICRO® A07. Simulated fouling processes were performed by using either a ...

  • Genairclean RO membrane cleaning - Case Study

    Trial Period September 2013 to May 2014 Site Water Reuse system, UK Background A Brackish Water Reverse Osmosis (BWRO) system with a history of rapid and consistent membrane fouling was selected to trial the new ‘Genairclean’ micro-bubble multi-mechanism RO membrane cleaning method. The plant reclaims process ...

  • Microbubble RO membrane cleaning reduces fouling on WWRO plant.

    Over the last ten years there have been significant developments in new devices for energy recovery, new membrane materials, and new sizes and orientations of reverse osmosis (RO) plants, all designed to reduce costs and improve efficiency. The fundamental issue of keeping membrane surfaces clean to ensure efficient RO plant operation has seen relatively few recent developments. This is ...

  • Cleaning biofouled membranes early improves plant operation. Comparison of autopsy and cleaning results on a small BWRO and large SWRO

    Abstract It is a fact that all new reverse osmosis membranes start to foul as soon as they start operation. The only variable is the rate at which they foul. Most RO plants operate at a differential pressure (ΔP) of 1.5 - 3 bar. Cleaning usually occurs when the ΔP is 10-15% above the design specification. This paper explores the benefits of early identification of foulants ...

  • White Paper - CIP Guidelines For Using IPC Detergents

    Cip Guidelines For Membrane Cleaning With Micro-90® Concentrated Cleaning Solution, Micro® Green Clean Biodegradable Cleaner, Micro® Ao7 Concentrated Citric Acid Cleaner, Zymit® Pro Enzyme CleanerWhen one of the following conditions occur, the membranes should be cleaned: a. Flux rate decreases by 10% b. Trans-membrane pressure (TMP) increases by 10% c. Permeate water ...

  • Chlor-Alkali Plants Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • The Use Of UV For Dechlorination

    For many years chemical disinfection techniques have been used to provide microbiologically pure water for industrial and domestic use. Free chlorine, typically introduced by municipal water treatment plants in gaseous form, has been employed for many decades as a primary oxidising agent for the control of microbiological growth. Free chlorine can also be introduced through the injection of ...

  • Electronic Water Treatment - An alternative solution to removing beerstone and limescale

    Beer contains 90% water and is the most important ingredient in determining its flavor.  Water contains calcium and is the most important mineral to the brewing process.  The levels of calcium in local water have determined the type of beer produced.  The different types of beer whether a light lager or a porter are for the most part due to the water profiles of the areas that made ...

  • pH Probe Maintenance

    The success or failure of pH measurement depends on the proper application of the probe and proper subsequent maintenance of the probe. The procedures described within apply to the most common pH probe in use today and that is the flat surface combination pH probe. The most common failure mode associated with pH probes is breakage. The pH electrode is a very thin glass membrane that is easily ...


    By Digital Analysis Corp.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you