air advanced oxidation Articles

  • Advanced monitoring method for air environment

    The Ogawa Passive Sampler is one of the only known methods of passive simultaneous monitoring of more than two components in the air. The first advantage of Ogawa Sampler is to have two chambers with the same configuration where one can place two different kinds of collection filter pads. In the case of simultaneous collection of NO and NO2, The  O2 collection filter foated with triethanolamine ...


    By Ogawa & Company, USA, Inc.

  • Unexpected toxicity to aquatic organisms of some aqueous bisphenol A samples treated by advanced oxidation processes

    In this study, photocatalytic and catalytic wet-air oxidation (CWAO) processes were used to examine removal efficiency of bisphenol A from aqueous samples over several titanate nanotube-based catalysts. Unexpected toxicity of bisphenol A (BPA) samples treated by means of the CWAO process to some tested species was determined. In addition, the CWAO effluent was recycled five- or 10-fold in order ...


    By IWA Publishing

  • Advanced gas analysis - on the go

    The field of ambient air analysis - monitoring industrial and other environments for harmful concentrations of gases - has traditionally faced a technology limitations: Would you prefer a complete and reliable tool, which will be bulky, complicated and inconvenient? Or would you like a nice portable one that's simple and lightweight, but unreliable and limited in its capability? Truly complete ...


    By HHCS Handheld USA Inc.

  • Thermal oxidizer - Aluminum / alloy manufacturing company

    Epcon has extensive experience in designing and building Thermal Oxidizers for the Aluminum Industry. The Problem Gas usage kept going up and up over the years on the Thermal Oxidizer. Heat exchanger for hot air supply temperature from the oxidizer was dropping of over the years. Excessive heat loss on exterior components. The ...


    By Epcon Industrial Systems, LP

  • Case study - Styrene emissions: Catalytic oxidizer with concentrator

    Overview The world's largest button manufacturer needed a pollution control system that would destroy styrene emissions from a variety of plant processes. The plant was proactively seeking a cost-effective air pollution control solution to preempt future regulatory action. The main concern of the customer was the high operating cost of an emission control system. ...

  • Odor Control Advances at Composting Facility

    The Rockland County (New York) Cocomposting Facility began operations in February, 1999, processing biosolids from the five publicly owned treatment works (POTWs) in the county. The Rockland County Solid Waste Management Authority (RCSWMA) owns the facility, but contracted with Waste Management of New York to design, build and operate (DBO) the 110 wet tons/day agitated bin composting facility ...


    By BioCycle Magazine

  • On the thermal oxidation stability of pyrolysis biomass oil

    The rice husk-based biomass-oil is composed of complex organic compounds and water, and its oxidation stability has a direct influence on its physico-chemical property and application. The advanced oxidation experiments were carried out through the flowing of air and oxygen respectively. The influences of four factors, including gas flux, oxidation time, temperature and copper foil, on the ...


    By Inderscience Publishers

  • LATEST TECHNOLOGY: Low Cost INDUSTRIAL OXIDIZER SYSTEMS

    SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else:  (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator,  (3) VERY SMALL FOOTPRINT - -  usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring ...


    By Soil-Therm Equipment, Inc.

  • Catalytic Oxidizers…What You Should Know.

    Within the U.S., depending upon specific plant operations, geographic locations, etc.,  many companies concerned with controlling VOC emissions have been operating air pollution control systems for years.  However, due to business expansion, plant modifications or recent changes in EPA guidelines, an increasing number of companies are now finding it necessary to install new emission control ...


    By The CMM Group, LLC

  • A perfect pair: SBR designs & advanced aeration technology

    Conventional sequencing batch reactors (SBRs) that utilize diffused-air networks have existed in the U.S. for about three decades now. The reliability of controls and instrumentation has significantly improved in the last 10 to 15 years, and as a result, SBR plant designs are becoming more widely accepted. The attractiveness of their compact layout and ease of operation has also helped increase ...

  • LATEST TECHNOLOGY: Low Cost PAINT BOOTH VOC OXIDIZERS

    SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else:  (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator,  (3) VERY SMALL FOOTPRINT - -  usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring ...


    By Soil-Therm Equipment, Inc.

  • LATEST TECHNOLOGY: Low NOx PAINT BOOTH & INDUSTRIAL OXIDIZERS with Heat Recovery

    SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else:  (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator,  (3) VERY SMALL FOOTPRINT - -  usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring ...


    By Soil-Therm Equipment, Inc.

  • LATEST TECHNOLOGY: Small PAINT BOOTH OXIDIZERS with Heat Recovery

    SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else:  (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator,  (3) VERY SMALL FOOTPRINT - -  usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring ...


    By Soil-Therm Equipment, Inc.

  • A Breath of Fresh Air for Your

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With over two decades of proven success, catalytic oxidation is a popular method for controlling volatile organic compound (VOC) emissions.During the past 25 years, industry has made progress in ...


    By The CMM Group, LLC

  • LATEST TECHNOLOGY: Smartphone SVE BLOWER & OXIDIZER SYSTEMS with Remote Monitoring

    SOIL-THERM designs and builds SVE Blower and Oxidizer systems for environmental and remediation applications that are full of features and LOW in price. By integrating advanced PLC capabilities into these systems, SOIL-THERM offers our customers a whole new level of capabilities.  The SVE Blower system with or without oxidizer allows changes to flows, blower speeds, alarms, manual ...


    By Soil-Therm Equipment, Inc.

  • Air Pollution Control Specs

    As the full effect of the federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With more than 25 years of proven success in a variety of industries, catalytic and thermal oxidation has become a popular method for controlling volatile organic compound (VOC) and hazardous air ...


    By The CMM Group, LLC

  • The Right Mix for Clean Air

    Reducing air pollution is an increasingly important topic all around the world. Many governments—also in developing countries—set new limits for emissions such as nitrogen oxides in flue gas. Sulzer offers advanced mixing technology for flue gas cleaning. The installation in a large power plant shows that these high-performance mixers can cope with the most difficult requirements. ...


    By Sulzer

  • NOx in Non-Utility Industries - Part I NOx in Non-Utility Industries - Part I - Air emission origins, best control solutions and monitoring methodology for nitrogen oxides

     Problems with reducing nitrogen oxides (NOx) are widespread in the general process industries. These industries, together with medium size utility and power generators contribute about 15 percent of global NOx emissions. The emission sources addressed include various heaters employed in chemical and petrochemical plants, nitric and sulfuric acid plants, glass furnaces, iron and steel mills, ...


  • Effect of EGR on performance and emission characteristics of diesel engine at advanced injection timing

    This work attempts to reduce the smoke density of diesel engine by advancing the fuel injection timing and also the NOx emission of the engine by introducing EGR at the advanced injection timing. A single cylinder 4.4 kW air cooled, naturally aspirated, stationary diesel engine was utilised for the investigation. Engine tests were conducted at different loads at standard injection timing and ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you