air duct Articles
-
COMMON BITE METHOD OF LOCKFORMER MACHINE
Lockformer machine, also known as roll bone machine, bite sewing machine, edge biting machine, windpipe bite machine，and windpipe roll bone machine. It is a kind of multifunctional machine, mainly used for the bite processing of plate connection and round air pipe closed connection. It is an important part of the windpipe processing equipment. Lockformer machine can meet a variety of different ...
-
Dust Extraction for Douay Martyrs School - Case Study
We were contacted by Douay Martyrs School in Hillingdon to help assist them with a dust extraction system to serve their relocated design and technology workshop. They were looking for a company that had experience with similar installations within a school and a company that could react quickly so that the installation could be designed and installed before the end of the summer break. ...
-
Introduction of laboratory PP air duct
China Xicheng Ep Ltd. specializes in processing laboratory PP air ducts. The material is PP polypropylene, which is resistant to acid, alkali and organic solvent corrosion. It is usually used in laboratory ceilings. After the branch pipes are aggregated into the main pipe, they are connected by ventilation shafts To the top of the building, enter the PP alkali washing tower or activated carbon ...
-
Recommendations for the purchase of laboratory exhaust ducts?
The laboratory ventilation ducts are individually made of PVC, PP, stainless steel, FRP and other materials according to the components contained in the exhaust air. Ventilation ducts are classified according to material: individual: steel plate air duct (individual steel plate), galvanized sheet (white iron) air duct, stainless steel air duct, glass fiber reinforced plastic air duct, plastic ...
-
KEY POINTS FOR USE OF AIR DUCT EQUIPMENT
For duct processing, it is forbidden to put your hand into the gap between the mechanical pressure plate when cutting the duct with the plate shears to avoid any accidents. Tools and other items cannot be placed on the top knife rest. In the demolition, we should also cooperate with each other and keep a certain distance from the folding machine, in order to prevent the overturned steel plate or ...
-
OPERATION OF DUCT PRODUCTION LINE
The normal operation of the duct production line is inseparable from the normal operation of the machine. Therefore, in order to ensure the normal operation of the machine and daily production of the air pipe does not appear stops caused by faults, it is necessary to carry out maintenance of the duct production line. 1. The material requirements of the flexible pipe of the air duct cleaning ...
-
Syncreon International Group - case study
Syncreon is a specialised provider of integrated logistics services to global industries who provide supply chain solutions designed and customized to achieve maximum flexibility and agility. When Syncreon entered into agreement with a major manufacturer of printer cartridges to establish and operate a new manufacturing plant in Poland for the filling of printer cartridges they knew precisely who ...
-
Luxury Yacht Builder Chooses Western Air Ducts and Inteliair™
When Sunseeker asked their supplier the Direct Tools Company for a solution to the airborne dust problems they were experiencing within their temperature controlled CNC hull forming building DTC knew exactly who to turn to. It was clear from the outset that no ordinary dust extraction system would suit this application, with a 30-metre * 12-metre CNC machine and a multi-axis routing head ...
-
Wood Waste Extraction for The Grain Sign Company - Case Study
The Grain Sign Company are a market leader in the manufacture of bespoke 3D wooden signs that are utilised for many different applications across the country. They contacted Western Air Ducts (UK) Ltd. as they were looking for a new wood waste extract system within their busy workshop in Cornwall, with specific requirements for an efficient and flexible system. The Grain were aware that ...
-
Project - Euro-Polyclinic Zurich - Switzerland
In this project there was only one empty area. Within this, 3 operating rooms were to be set up in different colours, one of them including a radiation protection panel. Our doors have been specially manufactured with a 2 colored coating – front and back – to match the architect’s color scheme. For exhaust air ducts, CNC-milled plates were precisely adapted for the intake ...
-
Analysis of Points for Attention in the Use of Raymond Mill
With the development of China's economy and technology, it puts forward higher requirements for coal industry crusher. Raymond mill can be used in coal industry, it integrates crushing, drying, crushing and other functions. In the large grinding process, it can meet the needs of customers. With the vigorous development of the western region, the resources of the western region can be displayed, ...
-
FUNCTIONS OF DIFFERENT AIR DUCT EQUIPMENT
The air duct equipment is composed of a series of machines. Different components have different functions and usages precautions. Bite machine: It uses the design of ball bearing, the material is operated according to the edge of the plate to minimize the wear of the machine, especially suitable for on site, processing plants and other non-special maintenance environments. Folding machine: The ...
-
Innovative Application of Rooftop Railing - Case Study
This particular application of KEEGUARD fall protection required creativity and ingenuity. There were many obstacles that made the installation of a straight run of guardrail unworkable. The railing had to go around air ducts, attach to some existing rail, and, in some cases, be mounted to the outer brick wall because of heating and cooling units protruding over the roof edge. The KEEGUARD ...
-
Troubleshooting of Raymond Mill
Common failure 1 Low yield or without flour Reasons: (1) The powder lock has not been adjusted properly and the seal is not tight, which causes powder inversion. (2) The shovel knife is worn out and the material cannot be shoveled. Removal methods: (1) Check and adjust the seal of the powder locker, and find that the air leak should be shoveled. (2) Replace the new spade. Common failures 2 The ...
-
Marketing Residential Air Duct Cleaning Services check list
The best marketing you can do is delivering good quality work. Satisfied customers (who will refer you) are the least expensive and most effective marketing tool created. It is estimated that 60% or more of your business will come from referrals. Quality work/customer satisfaction is your first and most important marketing tool. Take before cleaning and after cleaning photos. This shows your ...
By Vac Systems
-
10 point Weld Fume Extraction System - Case Study
In January 2019 The Health and Safety Executive (HSE) upgraded its policy on enforced control measures on fumes generated through welding. This follows an announcement from the International Agency for Research on Cancer (IARC), who classified welding fumes and UV radiation from welding as Group 1 carcinogens. Following on from these recommendations Centristic a company that designs, ...
-
COSHH LEV for one of the UK’s Largest Universities - Case Study
In early 2019 Exeter University made contact with Western Air Ducts to see whether as a company we have the scope and interest to look after the campus wide LEV systems they have. Exeter University is one of the leading universities in the UK, and although they cover many different core subjects they are particularly strong in life sciences and medicine. They currently have almost 150 Local ...
-
Polypropylene PP air duct cleaning and protection work
PP air ducts are mainly used in industrial and construction projects, and the application areas mainly include: the electronics industry of clean room purification systems, pharmaceutical and food aseptic workshop purification systems, hotels, factories, office buildings, shopping malls, air conditioning systems, industrial pollution control and dust , smoke and exhaust ducts, industrial ...
-
High Tech Research Centre - Case Study
The UK’s new High Temperature Research Centre (HTRC) has been designed to provide the UK with world-leading R&D capabilities in investment casting – and to tackle the dust extraction and fume extraction challenges these processes involve, both today and in the future, Western Air Ducts has designed and installed a complete, intelligent LEV system. The showcase £60m ...
-
High Tech Research Centre - Case Study
The UK’s new High Temperature Research Centre (HTRC) has been designed to provide the UK with world-leading R&D capabilities in investment casting – and to tackle the dust extraction and fume extraction challenges these processes involve, both today and in the future, Western Air Ducts has designed and installed a complete, intelligent LEV system. The showcase £60m ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you