air duct design Articles

  • Luxury Yacht Builder Chooses Western Air Ducts and Inteliair™

    When Sunseeker asked their supplier the Direct Tools Company for a solution to the airborne dust problems they were experiencing within their temperature controlled CNC hull forming building DTC knew exactly who to turn to. It was clear from the outset that no ordinary dust extraction system would suit this ...


    By Western Air Ducts (UK) Ltd.

  • Understanding Air Pollution Control System Design Specifications

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many different companies will be required to install new or additional air pollution control equipment.  With well over twenty-five years of proven success in a variety of industries, thermal and catalytic oxidation has become a popular method for controlling volatile organic compound (VOC) ...


    By The CMM Group, LLC

  • Ducted or Ductless Fume Hoods? Is this the real issue?

    Most laboratories will need some form of fume cabinet at some point. The type of cabinet is usually the starting point of the process, and the choice of either ductless or ducted cabinet is made. With the ever increasing need to save money and to be environmentally responsible there are other considerations that need to be explored before a decision can be reached. ...


    By Camlab Limited

  • UnderDuct contributes to LEED design at library (FRP)

    Application Spotlight Location: Eastern Avenue Library, Davenport, IA UnderDuct Details: Over 1500-linear feet of UnderDuct from 36" diameter down to 8" diameter Project Details (from Davenport Library Press Release): A successful public and private collaboration raised $8.2-million toward construction of Eastern Avenue Branch ...


    By Monoxivent

  • A new exhaust ventilation system design software

    By industries development, the amount of air contaminants that are released in workplace has grown increasingly. To reduce these contaminants, there are several methods that, one of which is control at source. Industrial ventilation is perhaps the most powerful tool available for environmental professionals to control workplace pollution. Exhaust ventilation can capture contaminants at source, ...


    By University of Tehran

  • The Right Mix for Clean Air

    Reducing air pollution is an increasingly important topic all around the world. Many governments—also in developing countries—set new limits for emissions such as nitrogen oxides in flue gas. Sulzer offers advanced mixing technology for flue gas cleaning. The installation in a large power plant shows that these high-performance mixers can cope with the most difficult requirements. ...


    By Sulzer Ltd.

  • Air Pollution Control Specs

    As the full effect of the federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With more than 25 years of proven success in a variety of industries, catalytic and thermal oxidation has become a popular method for controlling volatile organic compound (VOC) and hazardous air ...


    By The CMM Group, LLC

  • Expanding Reservoir Air Filters

    In all vented tanks, the rise and fall of fluid levels is offset by a corresponding volume of incoming and outgoing air. Keeping the incoming replacement air clean is essential for contamination control and thus the reliability of hydraulic systems. While targeting the system's reliability, JLM Systems Limited has developed the OilMiser™ Reservoir Aspirator (ORA) kit. This product represents a ...


    By JLM Systems Ltd

  • What makes an effective odor control cover system design?

    Background A common side effect of wastewater treatment processes is the unpleasant odor that can linger near the plant, annoying neighbors, who then complain. Often, the wastewater treatment plant was built many years ago in an isolated part of town.  Over the years, the town’s population grew until subdivisions were developed next to the treatment plant.   ...

  • 4 Signs Of Poor Indoor Air Quality To Watch For

    The quality of indoor air is something most of us take for granted. Unless there is something very specific and unusual going on around us, like heavy cleaning or maybe new construction, we don’t often think about whether or not there is anything wrong with the air we breathe as we go about our daily business. The truth is, though, that indoor air quality is often worse than ...


    By Camfil Ltd

  • Design, Construction, Installation, and Operation of a Compact Bio-Oxidation System to Manage Odors at the City of Wilsonville WWTP

    ABSTRACTThe 5 mgd Wilsonville WWTP was experiencing odor complaints from the adjacent residential neighborhood. An existing in-ground, bark and wood-chip biofilter was not performing well. In December 2004, the City of Wilsonville contacted BioReaction Industries (BRI) requesting the design of a bio-oxidation system with guaranteed performance criteria. The project required an understanding of ...

  • Minimising Risks to Air Quality and Regulatory Compliance With Total Filter Management

    It has been shown in recent studies that as much as 25% of the total site operating budget (excluding raw material costs) for a typical medium-large dosage-form manufacturing facility will be spent on compliance measures for internal quality systems and external regulatory activities. (1) Market realities indicate that the pharmaceutical companies will need to address the overall cost of ...


    By GVS Filter Technology

  • Textile Industry: Air Pollution Control Through Wet Scrubbers, High Energy Venturi Scrubbers, Packed Bed Scrubbers and Other Technologies

    Wet Scrubbers, High Energy Venturi Scrubbers, Packed Bed Scrubbers are an excellent solution for air pollution in the textile industry. The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well ...


    By CR Clean Air Group, LLC

  • Industrial Noise Control Services

    Industrial Noise Control Studies Study different equipment noise and recommend suitable noise insulation. This include diesel generators, gas turbines, compressors, pumps, fans, chillers, factory machineries, traffic noise,...etc. Our evaluations and recommended solutions meet general guidelines and practices of international standards and nroise laboratories such as ...

  • High Tech Research Centre - Case Study

    The UK’s new High Temperature Research Centre (HTRC) has been designed to provide the UK with world-leading R&D capabilities in investment casting – and to tackle the dust extraction and fume extraction challenges these processes involve, both today and in the future, Western Air Ducts has designed and installed a complete, intelligent LEV system. The showcase £60m ...


    By Western Air Ducts (UK) Ltd.

  • TopAir`s Fume Hood

    TopAir, Statitech Israel’s flagship brand, manufactures a full line of superior cleanroom equipment including a reliable fume hood for neutralizing potential airborne chemical hazards in the laboratory. The fume hood mechanism offers maximum protection to laboratory staff working at a cleanroom table under the fume hood.   There are two basic types of fume hood. Many industries use a ...


    By TopAir Systems

  • Syncreon International Group - case study

    Syncreon is a specialised provider of integrated logistics services to global industries who provide supply chain solutions designed and customized to achieve maximum flexibility and agility. When Syncreon entered into agreement with a major manufacturer of printer cartridges to establish and operate a new manufacturing plant in Poland for the filling of printer cartridges they knew precisely who ...


    By Western Air Ducts (UK) Ltd.

  • Case study - Rubber curing emissions

    Overview A rubber curing company was looking for a new, affordable abatement solution to treat their blue haze and low-level Volatile Organic Compounds (VOCs) in order to meet regulatory requirements. The large Electrostatic Precipitator (ESP) in use was extremely expensive to operate and maintain. The company began their search for a system that offered effective opacity control and ...

  • Building Science Issue (Attic)

    Client: Upscale Custom Home Builder  Location: Florida Gulf Coast  Completion: Sept thru Oct 2007  Corrections Cost: ~$25,000 Key Project Team: Timothy Toburen Indoor Environmental Technologies (IET) was retained by the builder to determine the cause of excessive sweating ...

  • Fume control in large weld cells case study

    The Problem Tayco-Panelink is a Canadian based manufacturer of office furniture. Their customer base is worldwide. In 2001, DiversiTech installed a small fume extraction system which continues to do the job today. With this in mind, Tayco called on us to set up their new welding cell. Unfortunately, the welding fixtures were too large to accommodate a source capture system.   ...


    By Diversitech

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you