air emissions control Articles

  • Scrubber Removes Grease and Particulates from Air Exhaust

    Operating Issue A food-industry leader in Alabama operates several pork-sausage cookers that exhaust over 4,000 ACFM of moisture and pork grease. The operator installed Electrostatic Precipitators (ESPs) to treat the exhaust but these systems performed poorly and generated high maintenance and operating costs. Additionally, these systems were antiquated and required significant capital ...


    By Pollution Systems

  • Air pollution regulations drive deployment of flexible abatement solutions - Case Study

    To address the growing complexity of air pollution regulations, which have to address a multi-tiered array of local authority, national and international requirements, AirProtekt of Cambridge is offering a total package air pollution service that embraces process assessment, project design, supply of the air pollution equipment, installation and commissioning. Modern Air pollution regulations ...


    By AirProtekt Limited

  • Keeping APCr out of Landfill

    The CIWM have recently featured an article by our very own Dr David Deegan in the latest edition of their magazine. The article explains why Tetronics International were unhappy to be informed recently that Defra ministers had taken the decision not to remove the ...

  • Controlling Hazardous Air Emissions With A Catalytic Oxidizer

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment. With well over twenty years of proven success, catalytic oxidation is a popular method for controlling volatile organic compound (VOC) emissions.During the past 25 years, industry has made progress in ...


    By The CMM Group, LLC

  • A cost-effective method for controlling compost air emissions

    In October 2007, ECS began conducting trials at California State University Fresno (CSUF) to explore using the new patent pending AC Composter (ACC) covered aerated static pile system to manage dairy manure solids and comply with airquality standards. A two-zone portable pilot system was delivered by ECS and installed at the CSUF research dairy. This research is being conducted under a Phase I ...

  • Metal Coating Emission Control

    The use of regenerative thermal oxidizers is expanding into applications where they wouldn’t have been considered years ago, says Mike Scholz As the first generation of oxidizer systems in the industry nears the end of their service life, many canmaking plants face repair or replacement of their existing air pollution control systems. Like many others in the industry, a Silgan canmaking ...

  • Greenhouse Gas Emissions Control

    Most of the time, people think about Greenhouse Gas (GHG) emissions with carbon dioxide, which is the most common of the GHGs. While fairly typical, carbon dioxide isn’t the only GHG U.S. Environmental Protection Agency (EPA) regulates.  Since EPA has begun regulating GHG emissions under its Clean Air Act authority, sources of emissions from others may require add-on air pollution ...

  • Controlling particulate emissions

    Cloud chamber technology uses electrically charged water droplets to attract fine particles and remove them from exhaust streams. At the Saint-Gobain Advanced Ceramics Boron Nitride (formerly Carborundum) plant in Amherst, ...


    By Tri-Mer Corporation

  • Clearing the air: the use of bio-oxidation for industrial air emissions control

    The wood products industry began rather ardous road to emissions control in the early 1990s with the first installation of a thermal oxidizer (an RTO) at a California MDF facility, for volatile organic compound (VOC) control. During the ensuing years, virtually every panel board facility has had to control emissions of VOCs, and up until the last few years, always with some sort of thermal ...


  • Effective control of fugitive emissions

    Are you Building a brand new process and want to get through the permit process quickly? Looking for ways to further reduce emissions? Under an order from U.S. Environmental Protection Agency (EPA) to further reduce emissions? With EPA continually pressuring industry to reduce emissions, control of fugitives is increasingly important to your overall emissions ...

  • Methods for the control of oil vapour emissions

    There are many oil vapours to discharge from oil containers into the atmosphere in oil operations (such as storage and loading). Two basic concepts are discussed regarding the control of oil vapour emission (OVE). The first is to invent active methods to restrain the OVE. The second is to develop passive tail–end remediation technologies to control the released vapour. Oil vapour recovery ...


    By Inderscience Publishers

  • Put energy into emission control projects

    Many companies feel pressured to spend the least amount possible to meet environmental regulations, primarily because compliance isn’t a profit generating endeavor. What some environmental and compliance managers fail to realize is that emission control equipment can quickly become a profit decreasing endeavor with this penny wise-pound foolish approach. With mandatory greenhouse gas (GHG) ...

  • Hydrocarbon evaporative emissions & control for automotives

    Even the cleanest and most efficient vehicle on the market today still pollutes the air and otherwise damages the environment. Motor vehicles emit several noxious pollutants which vehicle emissions standards are designed to regulate. Vehicles generally emit Hydrocarbons (HC), Carbon monoxide (CO), Nitrogen oxides (NOx) and Fine airborne particulate matter (PM) as pollutants that require control. ...

  • EPA Increases Ammonia Emissions Control

    Concern about ammonia emissions in the air and the water continues to grow, both officially and unofficially. As U.S. Environmental Protection Agency (EPA) moves to further reduce ammonia concentrations in surface waters, common water treatment methods transform what had been a water pollution problem into an air pollution issue. Earlier this year, EPA released its draft Integrated Risk ...

  • Panelboard emission control: An historical perspective

    Sometimes the best view of the future can be seen from the past. That's why we've written this paper. We believe that an understanding of the history of emission controls in the panelboard industry will help everyone understand how this industry got to where it is and what the future holds. This account focuses on the evolution of technology devoted to the control of air pollution emissions from ...


    By Lundberg, LLC

  • Carbon Fiber Emission Control Strategies

    Problem Carbon fiber (fibre) and graphite reinforced polymers are materials that have, and will continue to revolutionize the products we use everyday by making them stronger, lighter and more durable. However, the manufacturing process can have serious environmental ramifications and immediate danger to human health if careful consideration is not given to emission control at the ...

  • Kinetic Evaluation of H2S and Ammonia Biofiltration for Air Emissions Control

    ABSTRACTTraditionally the control of H2S emissions includes direct air stripping, precipitation and chemical oxidation. In this study, low cost biofiltration using a natural media of wood chips and compost and a commercial biofiltration media were evaluated for the removal of moderate concentrations of H2S (up to 50 ppmv) at different Empty Bed Contact Times (EBCT) in the range of 10-80 seconds. ...


  • Air Emissions from the automobile manufacturing industry: a bio-oxidation pilot study of paint emissions control

    Bio•Reaction Industries (BRI) was contacted by Toyota to assess the abatement potential of an engineered bio-oxidation system (biofilter). The proposed intent of the pilot was to evaluate the effectiveness of biofiltration as available alternative to traditional VOC removal technology on an existing 3 stage wheel paint booth. A pilot unit consisting of a biotrickling filter and a separate ...


  • Air Pollution Control Specs

    As the full effect of the federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With more than 25 years of proven success in a variety of industries, catalytic and thermal oxidation has become a popular method for controlling volatile organic compound (VOC) and hazardous air ...


    By The CMM Group, LLC

  • Air emissions from the automobile manufacturing industry a bio-oxidation pilot study of paint emissions control

    Bio•Reaction Industries (BRI) was contacted by Toyota to assess the abatement potential of an engineered bio-oxidation system (biofilter). The proposed intent of the pilot was to evaluate the effectiveness of biofiltration as available alternative to traditional VOC removal technology on an existing 3 stage wheel paint booth. A pilot unit consisting of a biotrickling filter and a separate ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you