air filter element Articles

  • Southwest Research Institute® (SwRI®) Technical Report Summary; SwRI Project No. 08.16032.009, “Filter Cleanability Testing”

    This Technical Report Summary presents an overview of laboratory testing conducted at SwRI to evaluate the performance of a Diversi-Tech Green Filter Cleaning Machine under controlled laboratory conditions. In particular, the objective was to measure if and by how much, if any, airflow resistance, efficiency, and dust capacity changed for a given number of dust loading/filter cleaning cycles, ...


    By Diversitech

  • Green Filter Cleaning Machine case study

    This Technical Report Summary presents an overview of laboratory testing conducted at SwRI to evaluate the performance of a Diversi-Tech Green Filter Cleaning Machine under controlled laboratory conditions. In particular, the objective was to measure if and by how much, if any, airflow resistance, efficiency, and dust capacity changed for a given number of dust loading/filter cleaning cycles, ...


    By Diversitech

  • Why use purge air? And what practicalities to consider.

    Many AMETEK Land instruments use purge air, in the post I am going to explain the purpose and some of the practicalities surrounding this technology. In general, purge air is used on optical instruments such as emissions monitors and ...


    By AMETEK Land

  • What is Indoor Air Quality and How Can You Improve It?

    For the longest time, air quality was meant to refer to the quality of air circulating outdoors. However, indoor air or the air found inside and around homes and office buildings is just as important to pay attention to. Improving indoor air quality should be a priority for everyone.  What is Indoor Air Quality? Indoor air quality is the quality of air found circulating ...


    By Filter Buy

  • The determination of major and minor elements in air filters and urine for hazard assessment, using a new CCD DUAL-VIEWED ICP optical emission spectrometer

    This article describes the application of a new type of CCD-based, dualviewed ICP optical emission spectrometer for the analyses of industrial hygiene types of samples. Several trace elements in air filter media are determined by ICP-OES. Urinary electrolytes and trace elements are determined in a single dilution automatically in both the axial and radial plasma viewing orientations. Results of ...


    By PerkinElmer, Inc.

  • Why Use Purge Air? And What Practicalities to Consider.

    Many AMETEK Land instruments use purge air, in the post I am going to explain the purpose and some of the practicalities surrounding this technology. In general, purge air is used on optical instruments such as emissions monitors and ...


    By AMETEK Land

  • Dry dust control systems - Case study

    Two gold mining companies each chose multiple Tri-flow systems for dry dust control on thermal treatment systems that exhaust to atmosphere. The Tri-Flow units range in capacity from 2000 to 20,000 cfm; all use Tri-Plus MERV 15 filters, an alternative proven superior to bags and cartridges, which are typically MERV 10-13. ...

  • Breathe easy: The importance of emission reduction and energy efficiency

    Breathe easy Blue oil mist is an unwelcome by-product of industrial work in the energy sector. contec specialises in high-powered, energy efficient and environmentally friendly oil mist filtration systems that reduce health risks and are an inexpensive alternative to traditional exhaust piping. The high concentrations of blue oil mist produced by industrial ...

  • The main benefits of using good branded air purifier in home

    Air purifiers assist to remove impurities in the air we breathe. For example: dust, pollen, pet dander, smoke, mold spores, and other airborne pollutants. Most air purifiers use a woven material to capture particles as they try to pass through. A system of internal fans in the air purifier pulls the air in the home and a series of filters in the air ...

  • Exhaust Air Filtration in Systec Autoclaves

    Steam sterilization in autoclaves is used – especially in biological and medical laboratories – to inactivate natural or genetically modified microorganisms. However, during the heat-up phase, in which air is removed from the pressure vessel, biological agents can potentially escape into the work area as aerosols. This means ...


    By Systec GmbH

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you