air filtration equipment Articles

  • Air filtration applications for membranes

    Given their unique performance attributes membranes are finding use in a growing number of high efficiency air filtration applications. One example is in respirators and personal protective equipment. Applications where intense physical demands and risk of exposure to harmful contaminants are present demand the high efficiency / low pressure drop combination of expanded polytetrafluoroethylene ...

  • Case study - Organic particulate filtration

    Overview A food products company that mixes various types of waxes and other components to make the base for chewing gums was faced with the issue of cleaning up a slightly odorous, visible emission being exhausted from two of their process lines. The components of the emission were hot particles of chewing gum and some volatile organic compounds (VOC's). The particles would quickly clog ...

  • Air Canada - Landing Gear Shop completes initiative to enhance air quality case study

    Canada's national carrier, Air Canada, based in Montreal asked DiversiTech to find a solution to their dust problem in the landing gear maintenance area. Dust from exotic metals were flying all over the shop and creating an unsafe environment for employees and computer systems. DiversiTech installed articulating capture arms and downdraft tables to capture the dust at the source and ...


    By Diversitech

  • How to Choose the Right Commercial Air Filter

    When it comes to selecting a commercial air filter, or air filtration system, there are many variables that have to be considered. In general, the choice of which air filter can be made a bit easier by first defining the overall goal that you are trying to achieve which is usually one of two options. Is the purpose of the filter to protect the air circulation equipment, or is it to provide a ...


    By Camfil Ltd

  • BHP Billiton - cooling water treatment & solids filtration

    Client: BHP Billiton Douglas CETCO Oilfield Services was requested to supply a water treatment package to treat heavily contaminated water in-line. Consequently CETCO’s equipment had to operate at pressures of up to 15.5 bar and temperatures of 120°C. Following lab bench studies and a technical onsite evaluation, CETCO modified an existing RFV 3000 adsorption skid to carry out this unique closed ...


    By CETCO Energy Services

  • Optimising existing equipment with Bioconservación products

    As part of its technical support service offered to clients on an ongoing basis, Bioconservacion conducted an efficiency study at the express request of one of its customers. The study explored solutions to improve efficiency in eliminating odours origintating from biological reactors through the use of horizontal deodorisation systems. The objective was to guarantee the ...


    By Bioconservacion SA

  • Indoor Air Quality and Hazardous Gas Detection

    Indoor air contaminants come in a variety of forms and originate from multiple sources. Interactions between building materials and furnishings, activities and equipment inside the building, internal temperature and relative humidity, filtration and ventilation system operations, climate and building occupants all contribute to the indoor air quality (IAQ) in commercial, industrial, residential ...

  • The Hidden Danger Of Air Quality in Indoor Firing Ranges

    Indoor gun ranges are popular with both professionals who use guns as a part of their job and hobbyists who just enjoy guns and shooting. ...


    By Camfil Ltd

  • Why choose an electrostatic, washable air filter?

    When deciding what type of air conditioner or furnace filter to use, you should keep two things in mind: Airflow and Efficiency. In order to work at its optimum level, the a/c or heating unit requires no restriction to air flow. You should choose a filter that has the least effect on airflow, but removes the most dust from the air. ACI’s electrostatic air filters allow the air conditioning ...


    By ACI Manufacturing

  • Indoor air quality can be improved by employing plants as walls

    The practice of planting ivy to climb up the walls of buildings has existed for centuries. Now, the trend towards sustainability and green building practices can lead to the development and use of living walls as a means of filtering and improving a building’s indoor air quality. Green walls are a living, breathing, regenerating type of cladding that can be as simple as a living art installation ...


    By Actual Media

  • Dry/Wet Scrubbers for Clean Air Compliance

    Air-scrubbing venturis and towers may be the answer to clean air compliance for small- to medium-sized companies. Forthcoming requirements of the Clean Air Act Amendments of 1990 will inventory many more specific chemicals considered hazardous. From acetaldehyde to xylenes, the list regulated under the air taxies program includes 189 hazardous air pollutants (HAPs). That number may ...


    By CR Clean Air Group, LLC

  • Ethylene removal through oxidation in EthylClean Machines versus forced air through ozone

    Fruit constantly emits ethylene inside the chambers. To efficiently reduce the concentration of ethylene in these spaces, it needs to be eliminated at a speed that is faster than the production ratio of the fruit. This is achieved when the airflow that passes through the machines in one hour is equal to the volume of the chamber. Depending on the chamber's volume, Bioconservacion recommends ...


    By Bioconservacion SA

  • Crossflow Membrane Filtration High-Purity Water Systems

    INTRODUCTION As the electronics industry continues to provide us with such products as high resolution television, notebook size portable computers and cars with automatic navigation systems, it becomes necessary to produce semiconductors with finer device geometries to allow for efficient placement of more circuits per a given area. This requires increased control of a semiconductor's material ...

  • On-Line Fast Analysis of AMC from ppt to % levels in Clean Air Room

    To ensure people’s safety and a good repeatability of industrial process, near real-time risk management and the continuous monitoring are crucial. In the semiconductor fabrication process, particle control is an essential part. Clean room technology, which relies on the use of HEPA and ULPA filtration, has in the past exclusively focused on the control of micro- and nano-particles. ...


    By Chromatotec Group

  • The Key To Controlling Airborne Contamination In Food Processing

    In the food and beverage industry, contamination is always a high priority concern. Small mistakes in handling, preparation, and even in the cleaning of the environment where food comes into contact with surfaces can cause disastrous results that can potentially affect hundreds of thousands of people. Often overlooked is the threat from another source of food contact: air. ...


    By Camfil Ltd

  • Chemical Air Pollution in the Clinical Research Environment

    There has been a revolution in awareness of chemical air pollution in research laboratories. I could tell you several 'horror stories' of casual exposure to mercury vapour, benzene and chromic acid (the ultimate glassware cleaning agent) among innocent biomedical PhD students (including myself) in the 1970s. But researchers in hospitals, and other laboratories can never afford to be complacent ...


    By Commercial Air Filtration

  • Bioconservacion at the CEPSA Chemical Plant - Case Study

    CEPSA continues to trust in Bioconservacion solutions for the prevention of corrosion in electrical control rooms. In CEPSA's different refineries we have already installed equipment to regulate corrosion and pressurisation in electrical rooms. We recently published an article on this subject on our blog; to read the article ...


    By Bioconservacion SA

  • Maintain a Healthy Workplace with Oil Mist Collectors

    Many machining shops use a variety of metal working fluids, which support the creation of the metal components. During the creation process, lubricants and coolants get converted into vapors, aerosols and mist, which can be very harmful to workers who work in the facility. The inhalation of metal working fluids can lead to a number of medical conditions, which includes irritation of the eyes, ...


    By ProVent, LLC

  • Project profile - Naval air station Electronic Warfare Range (EWR) centroid Facility - Fallon, NV

    Background In late 2006, AdEdge Technologies was awarded a turnkey adsorption based system for arsenic removal for the NAS Electronic Warfare Range (EWR) Centroid Facility - Fallon, NV. AdEdge performed this turnkey contract under a Task Order from Barajas & Associates and NAVFAC oversight. Engineering plans and permit application were developed and submitted by AdEdge and ...

  • North American R&D facility builds prototypes

    Situation: North American R&D facility of U.S.-based leading global security company builds prototypes of unmanned airborne systems for the purpose of testing and validation. Parts are produced in limited numbers throughout the fabricating shop. Component building process involves the use of adhesives that will only successfully bond within very specific temperature ...


    By Duroair Technologies Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you