air handling fan Articles

  • Determining Proper Cooling Tower Size

    To maximize water-based cooling tower benefits, the appropriate tower size must be selected, requiring the identification of several critical factors. Cooling towers are a relatively inexpensive and reliable way of expelling heat from a number of industrial processes, including nuclear & thermal power plants, petroleum refineries, petrochemical plants, food processing plants, as well as HVAC ...


    By Delta Cooling Towers, Inc

  • Tri-Mer Fan / Separator Chosen by Boeing

    Boeing Helicopter, Ridley Park, Pa., manufactures specialty aircraft components, for the Chinook (CH-47).  The facility also repairs and overhauls aircraft, including the entire US Chinook fleet. In June, 2003, Boeing contacted with Walgren Company (Grand Rapids, MI) for manufacture of an alodize line.  The 5-stage alodize system was specified with a Tri-Mer “Fan/Separator” to handle ...


    By Tri-Mer Corporation

  • Case study - RTO handles high VOC loading at silgan containers

    OVERVIEW Regeneration Game - Originally printed in The Canmaker Magazine - Sayers Publishing Group As the first generation of oxidizer systems in the industry nears the end of their service life, many canmaking plants face repair or replacement of their existing air pollution control systems. Like many others in the industry, a Silgan canmaking plant in the ...

  • Air Pollution Control Specs

    As the full effect of the federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With more than 25 years of proven success in a variety of industries, catalytic and thermal oxidation has become a popular method for controlling volatile organic compound (VOC) and hazardous air ...


    By The CMM Group, LLC

  • A Breath of Fresh Air for Your

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With over two decades of proven success, catalytic oxidation is a popular method for controlling volatile organic compound (VOC) emissions.During the past 25 years, industry has made progress in ...


    By The CMM Group, LLC

  • Double Duty Scrubber for TDI Fumes A case-history description of a relatively uncomplicated but effective method for handling large runaway emissions of TDI and solvent vapors.

    NKI (B. V. Nederlandse Kleurstofindustrie, a subsidiary of Morton-Thiokol, Inc. U.S .A.), and one of the major industrial firms in the Netherlands, had a problem with extremely toxic TDI (toluene di-isocyanate) emissions from one of their processes . On a batch basis in different reactors, the largest being 6.5 m cubed(1717 U.S . gallons), a solution polymerization of TDI with polyols in a ...


    By CR Clean Air Group, LLC

  • Variable frequency drive energy saving on air compressors

    When we are looking for an innovative way to make its rotary-screw compressors more energy efficient and operator-friendly, they turned to Gozuk, Low-Voltage VFDs. In addition to supplying VFDs to control the speed and torque of the AF-series compressors, the Gozuk project team designed software to control the system pressure, air delivery, oil temperature and duty cycle directly from the VFD. ...


    By Variable Frequency Drives

  • Understanding Air Pollution Control System Design Specifications

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many different companies will be required to install new or additional air pollution control equipment.  With well over twenty-five years of proven success in a variety of industries, thermal and catalytic oxidation has become a popular method for controlling volatile organic compound (VOC) ...


    By The CMM Group, LLC

  • UVC keeps indoor air, a/c coils clean at College of the Sequoias

    At College of the Sequoias (COS), a California community college in Visalia, CA, indoor air quality is a high priority. “We have not had IAQ complaints, so when we discovered naturally occurring mold growth in the air conditioning coils, we decided to treat it proactively — before mold-related allergens circulated from the HVAC systems into the occupied space,” stated Eric ...


  • Thermal deoilers - Thermal deoiling of evaporator coils for air conditioners

    The Problem A major Air Conditioning company was mandated to have an alternate technology for degreasing evaporator fins. They had, until recently, been deoiling metal parts in a conveyorized solvent based vapor degreasing line, but the state environmental agency mandated that the line be shut down on a certain date due to the excessive water and air pollution it generated. The company ...


    By Epcon Industrial Systems, LP

  • Minimising Risks to Air Quality and Regulatory Compliance With Total Filter Management

    It has been shown in recent studies that as much as 25% of the total site operating budget (excluding raw material costs) for a typical medium-large dosage-form manufacturing facility will be spent on compliance measures for internal quality systems and external regulatory activities. (1) Market realities indicate that the pharmaceutical companies will need to address the overall cost of ...


    By GVS Filter Technology

  • Hyperion case study - UVC lights enhance air quality

    Located at the center of the Hyperion Wastewater Treatment Plant in Los Angeles, the Pregerson Building was experiencing indoor air quality (IAQ) problems. Built in 2002 to house nearly 400 city employees, the facility rapidly became the source of complaints about poor IAQ and odors. An engineered solution that incorporates both an odor control unit and supplemental ultraviolet- C (UVC) lights in ...


  • Operating Room - UVC lights provide infection control, green benefits

    Muskogee Community Hospital (Muskogee, OK) is using germicidal UVC (ultraviolet C) Emitters™ from Steril-Aire as part of an innovative infection control measure. The devices were installed in the air handling units and in custom-designed, ceilingmounted units in the surgical and procedural suites, marking the first time a hospital has used UVC technology in this way. Steril-Aire devices ...


    By E-CO

  • Impact lead the way in paper and glass separation

    Impact Air Systems was recently contacted by one of the UK's leading recycling led waste management companies to help them improve the process following the recent introduction of domestic glass into the material stream. The company involved have requested to remain anonymous, but currently operate 6 large scale operations in the UK.   We were called to their facility in the West ...


    By Impact Air Systems

  • Case study - Millbrook / General Motors

    Millbrook Proving Ground is one of the largest vehicle testing centres for the global automotive industry in Europe, constructed by General Motors. Today, they have a world-wide client base and test tracks for a whole range of vehicles. They chose Carbon Credentials, a leading supplier of Carbon & Energy Management software and related services, to conduct air conditioning inspections for ...


    By Carbon Credentials

  • TopAir’s Weighing Station

    TopAir is the flagship brand of Statitech Ltd., an ISO 9002 certified manufacturer of cleanroom products for the electronic, semi-conductor, biomedical and defense industries. Established in 1999 and ISO-9002 certified, Statitech Ltd. specializes in the development, production and marketing of a wide variety of standard and custom-made cleanroom products including a weighing station, and has ...


    By TopAir Systems

  • Liquid waste off-gas treatment - Case Study

    Application Biffa Waste Services operate a major waste disposal site at Kilsyth in Scotland where they handle many types of industrial liquid effluent. This can give rise to a range of emissions from both the tank farm and the road tanker deliveries. In addition, significant NO2 and nitric acid fume releases can arise from process upset conditions. ERG provided an emergency NO2 ...

  • Petro-Chemical Industry: Wet Scrubber Passes Acid Anhydride Test Case Study

    A leading U.S. chemical company upgraded air pollution control of maleic anhydride fumes at one of its overseas plants by installing a venturi scrubber. Selection of the scrubber was based on a pilot study to determine the percentage recovery and the maximum solution concentration of maleic anhydride that could be achieved using a wet scrubber. One significant reason for pretesting the ...


    By CR Clean Air Group, LLC

  • Chemical Industry: Wet Scrubber Passes Acid Anhydride Test Case Study

    A leading U.S. chemical company upgraded air pollution control of maleic anhydride fumes at one of its overseas plants by installing a venturi scrubber. Selection of the scrubber was based on a pilot study to determine the percentage recovery and the maximum solution concentration of maleic anhydride that could be achieved using a wet scrubber. One significant reason for pretesting the ...


    By CR Clean Air Group, LLC

  • LEV: What You Need to Know Before Selecting and Installing Dust Control Systems - White Paper

    Many processes in the production of drugs in the pharmaceutical industry produce significant quantities of dust which can cause serious health related problems to workers handling the materials. Additional problems of these operations are the loss of valuable material and the serious risk of cross contamination of drugs. Operations such as scooping, tablet processing, blending, milling, and tray ...


    By Kleissler P C, LLC

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you