air metal emissions Articles

  • Metal Coating Emission Control

    The use of regenerative thermal oxidizers is expanding into applications where they wouldn’t have been considered years ago, says Mike Scholz As the first generation of oxidizer systems in the industry nears the end of their service life, many canmaking plants face repair or replacement of their existing air pollution control systems. Like many others in the industry, a Silgan canmaking ...

  • X-Ray Fluorescence-Based Multi-Metal Continuous Emission Monitor

    ABSTRACT: Army demilitarization incinerators will need to comply with the Hazardous Waste Combustor National Emission Standard for Hazardous Air Pollutants that will regulate metals and metal compounds listed under the Clean Air Act Amendments. A large problem for these incinerator operations is limited knowledge of the type and quantity of emitted metals, so that compliance may be determined ...

  • Measurement of Trace metals in Ambient air case study

    Trace metals are found at low concentration in the ambient environment and are associated with adverse health effects. The gold standard metal measurement is Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES); however, sample preparation is laborious and expensive. The Xact 625 metals monitor uses non-destructive X-ray fluorescence technology. A built-in sample collection system ...

  • Common Treatment Technologies for Nonhalogenated VOCs in Air Emissions/Off-Gases

    Three technologies that are most commonly used to treat nonhalogenated VOCs in air emissions/off-gases are carbon adsorption, catalytic oxidation, and thermal oxidation. Carbon adsorption is a remediation technology in which pollutants are removed from air by physical adsorption onto the carbon grain. Carbon is 'activated' for this purpose by processing the carbon to create porous particles with ...

  • Common Treatment Technologies for Halogenated VOCs in Air Emissions/ Off-Gases

    Three technologies that are most commonly used to treat halogenated VOCs in air emissions/off-gases are carbon adsorption, catalytic oxidation, and thermal oxidation. Carbon adsorption is a remediation technology in which pollutants are removed from air by physical adsorption onto the carbon grain. Carbon is 'activated' for this purpose by processing the carbon to create porous particles with a ...

  • How to Monitor Mercury Emissions

    In recent years, mercury levels in the environment and in the food chain have risen substantially mainly due to human activities. As a long-range pollutant it can affect areas located thousands of kilometers away from its original source of emission. It’s no wonder then that the regulatory pressure to monitor mercury emissions grows stronger.  Before diving ...


    By Gasmet Technologies Oy

  • EMEP/EEA air pollutant emission inventory guidebook 2016

    1 Guidebook Introduction 1.1 Introduction The joint EMEP (1)/EEA Air Pollutant Emission Inventory Guidebook (the 'Guidebook'), following the 'Guidelines for Reporting Emissions and Projections Data' under the United Nations Economic Commission for Europe (UNECE) Convention on Long-range Transboundary Air Pollution (LRTAP) (2), provides concise guidance on how ...

  • Intraurban variability of Ambient PM Arsenic and other air toxics metals case study

    The Missouri Department of Natural Resources (MoDNR) and Washington University participated in a project to collect and analyze air toxics metals data. It was funded through a Community Air Toxics Grant from the U.S. Environmental Protection Agency (USEPA). The study grew out of the southside St. Louis Community Air Project (CAP) which identified six hazardous air pollutants of concern including ...

  • Air Rule for Cement Kilns Requires 92 Percent Cut in Mercury Emissions

    Portland cement kilns will be required to reduce emissions of mercury by 92 percent as part of an Environmental Protection Agency final rule announced Aug. 9 that imposes controls for several toxic pollutants. Although most of the emissions standards in the final rule are less stringent than what the agency had proposed in 2009, the cement industry said the cost to operate the required controls ...


    By Ohio Lumex

  • Heavy Metals in Waste

    Untitled Document Summary and discussion The aim of this report has been to demonstrate the existing knowledge regardng the harmful effects of heavy metals, the ...

  • Measurement of trace metals in ambient air: Validation of a rapid technique with gold standard ICP-AES

    Trace metals are found at low concentration in the ambient environment and are associated with adverse health effects. The gold standard metal measurement is Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES); however, sample preparation is laborious and expensive. The Xact 625 metals monitor uses non-destructive X-ray fluorescence technology. A built-in sample collection ...

  • Urban Air Quality Management

    ' Poor air quality due to pollution is a serious environmental problem in most urban areas. The greatest burden of pollution is on human health. Urban air quality management requires an integrated approach that (i) identifies the most serious problems and measures that offer cost-effective and feasible solutions across a range of economic sectors and pollution sources including industries, ...


    By The World Bank

  • Hydrocarbon evaporative emissions & control for automotives

    Even the cleanest and most efficient vehicle on the market today still pollutes the air and otherwise damages the environment. Motor vehicles emit several noxious pollutants which vehicle emissions standards are designed to regulate. Vehicles generally emit Hydrocarbons (HC), Carbon monoxide (CO), Nitrogen oxides (NOx) and Fine airborne particulate matter (PM) as pollutants that require control. ...

  • Evaluation of airborne heavy metal pollution from European sources

    An improved MSC-East model for the evaluation of the atmospheric concentration and deposition of heavy metals in Europe and adjoining regions is described. At present, modelling of lead, zinc, arsenic, cadmium and mercury concentrations is carried out within the EMEP grid. At the same time, MSC East performs model calculations within the whole northern hemisphere to the north of 20°N. Each ...


    By Inderscience Publishers

  • Metal releases from a municipal solid waste incineration air pollution control residue mixed with compost

    The influence of 10 wt.% mature compost was tested on the heavy metal leachate emissions from a calcium-rich municipal solid waste incineration air pollution control residue (MSWI APC). Apart from elongated columns (500 and 1250 mm), an otherwise norm compliant European percolation test setup was used. More than 99% of the metals Al, As, Cd, Cr, Cu, Fe and Ni were left in the APC residue after ...


    By SAGE Publications Ltd

  • Alcoa Brazil improves efficiency and reduces emissions with Xp3 Fuel Additive

    Uses Xp3 in 3 of their plants in Brazil in furnaces that melt down aluminum to improve efficiency and reduce emissions. A global leader in lightweight metals technology, engineering and manufacturing, Alcoa innovates multi-material solutions that advance our world. Their technologies enhance transportation, from automotive and commercial transport to air and space travel, and improve industrial ...


    By Xp3 Canada

  • Case study - Reactor vent emission control

    OVERVIEW Many chemical and petroleum companies use batch reactors to make their products.  These reactors typically have vents which are opened and closed during emptying, filling, mixing, heating or cooling and other steps of the production process.  The gases coming from these vents must be controlled under most government regulations.  Generally speaking, the ...

  • Analysis of point source emissions in the Texas-Mexico border region

    Pollutant emissions in the Texas-Mexico border were investigated using an emission database that covers 25 Texas counties and the states of Coahuila, Chihuahua, Nuevo Leon and Tamaulipas in Mexico. Major emissions are from energy generation, mainly from two coal-fired facilities in Coahuila, which also generate most of carbon dioxide. Texas exhibits a larger concentration of sources; around ...


    By Inderscience Publishers

  • Air quality in Europe - 2014 report

    Despite considerable improvements in the past decades, Europe is still far from achieving levels of air quality that do not pose unacceptable risks to humans and the environment. Air pollution is the top environmental risk factor of premature death in Europe; it increases the incidence of a wide range of diseases and has several environmental impacts, damaging vegetation and ecosystems. This ...

  • Metals: Scrubber System Removes HCL from Exhaust Case Study

    Although Indiana’s environmental protection agency has not yet added hydrochloric acid (HCl) standards to its Title 5 regulation of emissions sources, Allomatic Products Co., Sullivan, IN, was determined to erase HCI vapors from its plant discharge. In the mixed industrial/ residential neighborhood where its manufacturing plant is located, Allomatic wanted to be known as a good neighbor. ...


    By CR Clean Air Group, LLC

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you