air monitoring reference standard Articles

  • Study of vehicular emissions with reference to Pakistan's National Environmental Quality Standards: case study of District Swat, North of Pakistan

    This study was conducted during 2011–2012 with the objective to assess the ambient air quality in the surroundings of a newly constructed road in relation to Pakistan's Environmental Quality Standard (Pak–NEQS). The area was monitored twice, before and during the construction, to determine levels of sulphur dioxide, nitrous oxide, carbon monoxide, and PM10 (particulate matter). A ...


    By Inderscience Publishers

  • Is it time to upgrade the PM2.5 federal reference method?

    The fine particulate matter (PM2.5) Federal Reference Method (FRM) has in many respects been a great success. When the method was implemented, there was some doubt that the state and local monitoring agencies that routinely provide air quality data would be able to manage a program, which often distinguishes one location from another by just a few μg/m3. As it turns out, data from the FRM ...

  • High-Purity DNPH Standards for Monitoring of Atmospheric Carbonyls

    Analysts monitoring for atmospheric carbonyls follow prescribed methods published by the US Environmental Protection Agency, the California Air Resource Board, and the American Society for Testing and Materials (ASTM®). These methods call for trapping carbonyls on an adsorbent coated with dinitrophenylhydrazine (DNPH). Sigma Aldrich offers more than fifty 2,4-DNPH carbonyl derivative ...


    By Sigma-Aldrich Co., LLC

  • New NO2 air standards prove technically challenging

    On February 9, 2010, the U. S. Environmental Protection Agency (EPA) established a new National Ambient Air Quality Standard (NAAQS) for nitrogen dioxide (NO2). The new NO2 NAAQS is a one-hour standard set at 100 parts per billion (ppb), which is approximately 188 micrograms per cubic meter (μg/m3). Effective on April 12, 2010, the new one-hour standard is intended to protect against peak ...


    By Trinity Consultants

  • Is the Rotameter Ready for Retirement in Air Sampling/Monitoring Applications?

    The variable area rotameter has been the primary tool utilized for determination of flowrates passing through the air circuitry pathway of air sampling or air monitoring systems for many years. In air sampling applications a pollutant is captured on a collection medium (filter paper, charcoal cartridge, etc.) and taken to a laboratory for determination of the quantity of pollutant on the ...

  • AQMesh: a new option for flexible air quality monitoring

    AQMesh has an impressive collection of global users and performance results measuring ambient air quality in applications ranging from traffic planning and urban hotspots to industrial fence line monitoring, building ventilation management, or environmental lobbying. This pole-mounted unit comes with an independent power supply and communications, so offering the possibility of measuring air ...


    By AQMesh

  • An ambient air quality monitoring network for Buenos Aires city

    This paper proposes an objective methodology for designing a multi-pollutant urban air-quality monitoring network to detect concentrations greater than reference concentration levels (CL). The network design includes both air quality simulation and an objective analysis based on monitoring tasks. The proposed methodology is applied to the city of Buenos Aires. Pollutants of concern are nitrogen ...


    By Inderscience Publishers

  • Air quality Monitors Track Pollution Hot-Spots

    Situated in the south west of Wales, in a largely rural area bordering the Brecon Beacons, Carmarthenshire’s air quality is predominantly good. However, there are areas of concern where major roads pass through some of the County’s larger towns, including Llanelli, Carmarthen and Llandeilo, where air quality is dominated by the effects of road traffic. The County Council is therefore ...


    By Air Monitors Ltd.

  • Leveraging Standards in the Energy Resurgence

    An Interview with Fred Walas, P.E., Fuels Technology Manager, Marathon Petroleum Company Marathon Petroleum’s Fred Walas talks about today’s energy developments, sustainability at his company’s refineries and the crucial role of standards in fuel production and quality control. As the energy spectrum shifts in the United States, forms of resource extraction and ...


    By ASTM International

  • Smart Air Sampling Instruments Have The Ability To Improve The Accuracy Of Air Monitoring Data Comparisons Among Nuclear Industry Facilities

    Introduction Valid inter-comparisons of operating performance parameters among all members of the nuclear industry are essential for the implementation of continuous improvement and for obtaining credibility among regulators and the general public. It is imperative that the comparison of performances among different industry facilities be as accurate as possible and normalized to ...

  • The Need to Clearly State the Reference Temperature and Pressure Conditions when Reporting Gas Volumes or Volumetric Flow Rates

    In the physical sciences, such as chemistry, the standard temperature and pressure (STP) is a set of conditions for experimental measurements that enables true comparisons between sets of data representing gas volumes. There are many different definitions of standard temperatures and pressures applicable to gas volumes and volumetric flow rates. The differences depend on the organization defining ...


    By F&J SPECIALTY PRODUCTS, INC.

  • U.S. adopts global transportation standards

    New proposed shipping rules that harmonize with international standards will require some study. On Aug. 24, 2010, the Department of Transportation's Pipeline and Hazardous Materials Safety Administration (PHMSA) proposed to harmonize the Hazardous Materials Regulations (HMR) with international standards – 75 Fed. Reg. 52069. The proposed rule revises several proper shipping names, hazard ...


    By Bergeson & Campbell, P.C.

  • EPA Reviews National Ambient Air Quality Standards for Ozone, and Other Recent CAA Developments

    EPA Reviews National Ambient Air Quality Standards For Ozone: On December 17, 2014, the U.S. Environmental Protection Agency (EPA) issued a proposed rule revising the air quality criteria for ozone (O3) and related photochemical oxidants and National Ambient Air Quality Standards (NAAQS) for O3. 79 Fed. Reg. 75234. EPA proposed to revise the primary standard to a level within ...


    By Bergeson & Campbell, P.C.

  • Monitoring Environmental Quality

    ' In order to determine the effectiveness of actions to improve environmental quality it is necessary to be able to measure relevant environmental parameters at a level of detail which is accurate enough to distinguish the anticipated changes. However, the establishment and maintenance of monitoring systems is time-consuming and expensive and therefore the scale of such systems needs to be kept ...


    By The World Bank

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • Monitoring - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Understanding and Monitoring Hydrocarbons in Water

    Untitled Document 1. Introduction Oil contamination continues to be a very hot topic, due largely in part to recent catastrophic events with shipping ...


    By Arjay Engineering Ltd.

  • ASTM Standards Help Meet Need for Clean Water

    The new ASTM Water Portal provides a single access point to standards and related information about ASTM International’s diverse committees working to protect and monitor this vital global resource. Clean and safe water is the underpinning of the quality of life for people around the world. Global economies depend on water, whether it’s to support the manufacturing of goods ...


    By ASTM International

  • General Air Sampling Guidelines (PDF)

    This Standard Operating Procedure (SOP) provides guidance in developing and implementing sampling plans to assess the impact of hazardous waste sites on ambient air. It presents the United States Environmental Protection Agency/Environmental Response Team's (U.S. EPA/ERT's) approach to air sampling and monitoring and identifies equipment requirements. It is not within the scope of this SOP to ...

  • Wireless monitoring for a safe indoor environment

    This article discusses the benefits of wireless technology for continously monitoring the indoor environment. In striving for the construction of energy efficient and cost-effective buildings, the imperative issue of the buildings Indoor Air Quality (IAQ) is often overlooked. This can often lead to a unhealthy indoor environment and even to conditions such as Sick Building Syndrome (SBS) or other ...


    By PPM Technology

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you