air pollution control Articles

  • Air Pollution Control Specs

    As the full effect of the federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With more than 25 years of proven success in a variety of industries, catalytic and thermal oxidation has become a popular method for controlling volatile organic compound (VOC) and hazardous air ...


    By The CMM Group, LLC

  • Controlling Air Pollutants case study

    While it's not always easy to determine what's required for compliance, new technologies can help achieve air-pollution control Selecting air-pollution control equipment can be tricky. It's not only difficult to determine which pollutants must be controlled, but also which type of equipment will best control them to required levels for any given process or facility because there is no ...


    By Bionomic Industries Inc.

  • Alternative Fuels for Air Pollution Control

    Non-traditional, alternative fuels are all the rage now, especially with government pressure forcing increasing numbers of fossil-fired assets to shut down. While wind and solar have a place in our energy future, neither is reliable or inexpensive enough to be the complete answer.  Industry is looking for new fuels that can replace coal, oil and natural gas. Proposed alternative fuels come ...

  • Ammonium, nitrate, and total nitrogen determination in fly ash

    Fly ash is a by-product of the combustion of pulverized coal and is composed of small particles. The composition of the fly ash may vary considerably, however, all fly ashes contain substantial amounts of silicon dioxide (SiO2), aluminum oxide (Al2O3) and calcium oxide (CaO). Nowadays, air pollution control standards require a separation of flue gas before being released to the atmosphere. Fly ...


    By BÜCHI Labortechnik AG

  • High-temperature air pollution control technology

    Based on 35 years’ experience working for the environment, French company Maguin has developed the Cercat filter for high temperature air pollution control. David Gambier describes the technology and its potential use in the glassmaking industry.Maguin has been present in the waste thermal treatment field since the 1970s, offering customers innovative and state-of-the-art concepts. The company’s ...

  • Modest Growth for Air Pollution Control Market

    The Clean Air Act amendments of 1990 created a wave of optimism in the air pollution control (APC) business. The subsequent decade, however, resulted in backwash of disappointment for APC companies as the market for stationary source equipment declined from 1-4% per year from 1993-1998. Growth returned to the APC market, however, with 1999 and 2000 characterized as 'good' years by the Institute ...

  • Maintenance solutions for air pollution control equipment

    Manufacturing facilities are constantly under pressure to meet production forecasts at the lowest possible cost. These two goals; production output and cost control, can be difficult to obtain consistently in any manufacturing operation. Additional frustration to meet these goals can be exaggerated in today’s lean manufacturing climates that have trimmed budgets and reduced workforce. ...

  • Time to address the air pollution control residue problem

    The incineration of municipal solid waste is gaining increasing importance in the UK, especially as the burning of waste can be used to generate energy, providing a more sustainable solution to our waste problem by diverting it from landfill sites. An issue with incineration is that some of our waste contains hazardous chemicals such as chlorine and lead which are volatilised during the process. ...

  • Biofiltration - A Disruptive Technology for Sustainable Air Pollution Control

    ABSTRACTAir Pollution Control has emerged over the past 40 years as a significant industrial sector helping industrial facilities reduce emissions to comply with environmental regulations, reduce costs, and improve their public image. A variety of technologies have been developed to meet the needs of both the industries and the regulatory agencies.  Engineered biofiltration is a sustainable ...


  • Preventative Maintenance Solutions for Air Pollution Control

    Production output and cost control can be difficult to obtain consistently in any manufacturing operation.  In this white paper, we describe one facility’s experience with installing and maintaining a Volatile Organic Compound (VOC) control system. This is a typical example of how a preventive maintenance plan can ensure the control system operates with 100 percent reliability, how ...

  • Integrated maximum efficiency air pollution control system

    A major uranium refiner required an air pollution control system to control emissions from their hazardous incinerator. The presence of radioactive material demanded that outlet emissions approach non-detectable levels. Macrotek was contracted to design and supply the system. Advanced, cutting edge technology was used to design a system with the lowest possible emissions, which has been ...


    By Macrotek Inc.

  • Getting The Most From Air Pollution Control Systems

    Today’s air pollution control systems (APCSs) use high-efficiency heat exchangers, natural-gasfired burners, industrial-grade blowers, electric or pneumatic actuators and programmable logic controllers (PLCs) to ensure safe and efficient operation. However, dependable performance and a long life expectancy are contingent on thorough inspections and preventive maintenance at regular intervals. ...


    By The CMM Group, LLC

  • Achieving Air Pollution Control with Catalytic or Thermal Oxidizers

    As the full effect of 1990’s Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many manufacturing operations have become subject to stricter local, state and federal clean air regulations. Both VOC (volatile organic compound) and HAP (hazardous air pollutant) emissions are strictly regulated since they lead to the formation of ground-level ozone (or smog). The CAA ...


    By The CMM Group, LLC

  • Air Pollution Control in the Flexographic Printing Industry

    A basic review of technologies used, and selection criteria to consider, to successfully control the VOC/HAP emissions exhausted from flexographic printing presses. Within the flexographic printing industry, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new. Today, because of business expansion, modifications to plant operations, or changes in ...


    By The CMM Group, LLC

  • Achieving Air Pollution Control With Catalytic Or Thermal Oxidizers

    As the full effect of the Federal Clean Air Act (CAA) Amendments passed by Congress in 1990 continue to impact today's industry, many manufacturing operations have become subject to stricter local, State and Federal clean air regulations. Both VOC (volatile organic compound) and HAP (hazardous air pollutant) emissions are strictly regulated since they lead to the formation of ground level ozone ...


    By The CMM Group, LLC

  • Air Pollution Control in the Printing and Web Coating Industries

    For many U.S. companies in the printing and web coating business, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new.  In these industries, depending upon their location, companies have been installing APCS since the early 1970's.  However, for some companies the clock is still ticking regarding their compliance with local, state and federal ...


    By The CMM Group, LLC

  • Understanding Air Pollution Control System Design Specifications

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many different companies will be required to install new or additional air pollution control equipment.  With well over twenty-five years of proven success in a variety of industries, thermal and catalytic oxidation has become a popular method for controlling volatile organic compound (VOC) ...


    By The CMM Group, LLC

  • Air Pollution Control: Ready for the 21st Century

    The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well into the 21st century. The nature of the problem The major air pollution problem in the textile industry occurs during the finishing stages, ...


  • Treatment and Disposal of Air Pollution Control Residue

    What is APCr? Thermal waste management using Energy Recovery Facilities (ERFs) is now a well-managed and mature technology that is subject to environmental monitoring by a range of competent international bodies. These ERFs have been established as a means of diverting waste away from landfill disposal and for valorising the material and energy content of the waste. Counter to historic ...

  • Intelligent Pollution Control

    The world faces difficult pollution control decisions. For every dollar spent on pollution control, there is an alternative investment in health improvement. For every dollar spent on reducing one pollutant, there is an alternative to reduce another. The most prudent course to make the best investment should include: Intelligent uncertainty Intelligent classification of options ...


    By The McIlvaine Company

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you