air pollution control catalytic Articles

  • `Refinery MACT II Compliance - Are We There Yet,` presented at the 2004 NPRA Environmental Conference

    Introduction Refinery MACTII. 40 CFR Part 63 Subpart UUU, was published in Federal Register on April 12. 2002 by the U.S. Knvironmental Protection Agency (KPA). This rule, as a subpart of the National Kmission Standards for Hazardous Air Pollutants (NKSHAP), controls hazardous air pollutants from catalytic cracking units (CCU), catalytic reforming unit (CRU), sulfur recovery units ...


    By Trinity Consultants

  • Refinery MACT II Compliance – Are We There Yet?

    Refinery MACT II, 40 CFR Part 63 Subpart UUU, was published in Federal Register on April 12, 2002 by the U.S. Environmental Protection Agency (EPA). This rule, as a subpart of the National Emission Standards for Hazardous Air Pollutants (NESHAP), controls hazardous air pollutants from catalytic cracking units (CCU), catalytic reforming unit (CRU), sulfur recovery units (SRU), and bypass lines ...


    By Trinity Consultants

  • Achieving Air Pollution Control With Catalytic Or Thermal Oxidizers

    As the full effect of the Federal Clean Air Act (CAA) Amendments passed by Congress in 1990 continue to impact today's industry, many manufacturing operations have become subject to stricter local, State and Federal clean air regulations. Both VOC (volatile organic compound) and HAP (hazardous air pollutant) emissions are strictly regulated since they lead to the formation of ground level ozone ...


    By The CMM Group, LLC

  • Achieving Air Pollution Control with Catalytic or Thermal Oxidizers

    As the full effect of 1990’s Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many manufacturing operations have become subject to stricter local, state and federal clean air regulations. Both VOC (volatile organic compound) and HAP (hazardous air pollutant) emissions are strictly regulated since they lead to the formation of ground-level ozone (or smog). The CAA ...


    By The CMM Group, LLC

  • Air Pollution Control Using Catalytic, Regenerative or Recuperative Systems

    For companies in a variety of industries, the clock is ticking regarding their compliance with local, state and federal clean air requirements. The need to provide adequate emission controls still looms on the horizon as these companies explore the various equipment and technology options available to them. While the guidelines regarding air pollution control are consistent by industry, a ...


    By The CMM Group, LLC

  • Automotive parts coater exceeds local air quality requirements - Case Study

    Today many companies are faced with unique air pollution control problems arising from their coating operations. Not only are vented emissions required to be controlled, but now a more pressing issue is how to treat fugitive emissions. Fugitive emissions are the VOC and HAP releases that occur at the coating process or in a mixing area. Fugitive emissions are sometimes difficult to capture when ...

  • Air pollution regulations drive deployment of flexible abatement solutions - Case Study

    To address the growing complexity of air pollution regulations, which have to address a multi-tiered array of local authority, national and international requirements, AirProtekt of Cambridge is offering a total package air pollution service that embraces process assessment, project design, supply of the air pollution equipment, installation and commissioning. Modern Air pollution regulations ...


    By AirProtekt Limited

  • Petro-chemical processor meets national emission standards for hazardous air pollutants

    A multitude of chemical and petroleum processing facilities across the country are now faced with having to meet new National Emission Standards for Miscellaneous Organic Chemical Manufacturing. One specific NESHAP is 40 CFR part 63, subpart FFFF. The applicability of meeting this NESHAP is: A facility must be a major source of HAP emissions Process units that: Produce organic chemicals that are ...

  • Petro-Chemical Processor meets National Emission Standards for Hazardous Air Pollutants - Case study

    A multitude of chemical and petroleum processing facilities across the country are now faced with having to meet new National Emission Standards for Miscellaneous Organic Chemical Manufacturing. One specific NESHAP is 40 CFR part 63, subpart FFFF. A facility must be a major source of HAP emissions Process units that: Produce organic chemicals that are not subject to other MACT ...

  • Canadian biofuel manufacturer requires air pollution control - Case study

    With the expected rise in oil prices in the next few years, the increasing instability of the world oil supply, and the increasing demands from the EPA for cleaner fuels and production processes, Food and Plant based Ethanol production is on the rise. Along with this rise in production comes an increased requirement for Air Pollution Control Solutions in the Bio-Fuel’s market. Catalytic ...

  • Maintenance Tips: Thermocouples

    Keeping air pollution control equipment properly maintained is essential for meeting regulatory requirements and efficient operation. Here on the CPI blog, we regularly share tips on maintaining your systems, which requires replacing components on a yearly basis. Today we're taking a closer look at the importance of replacing ...

  • Medical implant manufacturer succeeds with the QUADRANT SRS Silicone Series Thermal OXidizer - Case study

    Medical Implant Manufacturer Succeeds with Customized Air Pollution Control Equipment Many industries utilize silicone as an ingredient in their manufactured product. Silicone enhances the attributes of the product or helps to improve production characteristics. Whatever the reason may be, users of solvent borne silicone's all face very troubling issues when it comes to the selection of the right ...

  • Silicone converter succeeds with custom air pollution control equipment - Case study

    Many industries utilize silicone as an ingredient in their manufactured product. Silicone enhances the attributes of the product or helps to improve production characteristics. Whatever the reason may be, users of solvent borne silicone's all face very troubling issues when it comes to the selection of the right air pollution control system. Among the air pollution control choices available to ...

  • Controlling Hazardous Air Emissions With A Catalytic Oxidizer

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment. With well over twenty years of proven success, catalytic oxidation is a popular method for controlling volatile organic compound (VOC) emissions.During the past 25 years, industry has made progress in ...


    By The CMM Group, LLC

  • Innovative Solar-Panel Manufacturer Selects Recuperative Catalytic Oxidizer for New Product Line

    Operating Issue A solar-panel manufacturer in California was ready to commercially produce a groundbreaking product that had taken many years to develop. Pollution Systems (PSSI) was initially contacted as a consultant to determine what air pollution control technology was most appropriate for the new product line used in their solar-panel production. PSSI worked closely with the company ...


    By Pollution Systems

  • Catalytic Oxidizers

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many different companies will be required to install air pollution control equipment. With more than twenty-five years of proven success, catalytic oxidation continues to be a popular method for controlling volatile organic compound (VOC) emissions. According to the Clean Air Act, any organic ...


    By The CMM Group, LLC

  • Cellulosic biofuels meets national emission standards for hazardous air pollutants - Case study

    Cellulosic Biofuels meets National Emission Standards for Hazardous Air Pollutants A multitude of new cellulosic bio-fuel processing facilities across the country are now faced with having to meet new National Emission Standards for Miscellaneous Organic Chemical Manufacturing. One specific NESHAP is 40 CFR part 63, subpart FFFF. The applicability of meeting this NESHAP is: A facility must be a ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you