air pollution control equipment Articles

  • Maintenance solutions for air pollution control equipment

    Manufacturing facilities are constantly under pressure to meet production forecasts at the lowest possible cost. These two goals; production output and cost control, can be difficult to obtain consistently in any manufacturing operation. Additional frustration to meet these goals can be exaggerated in today’s lean manufacturing climates that have trimmed budgets and reduced workforce. ...

  • Fume Scrubber for Grain Etch, Metal Finishing, and Other Operations Generating Fumes and Gases

    World's Largest Investment Casting Company Selects Tri-Mer for Air Pollution Control. Tri-Mer engineered and built air pollution control equipment for Alcoa Howmet's grain etch facility, which houses two process lines.  Contaminants include hydrochloric acid, ferric chloride and phosphoric acid. The phosphoric acid line includes a Tri-Mer Vertical Flow (V-F) Scrubber, and 6-stage tank line. ...

  • How to Obtain an Air Pollution Construction Permit Infographic

    Today, U.S. Environmental Protection Agency (EPA) is more aggressively pursuing enforcement actions against industrial sources than ever before. This is a result of EPA desire to generate revenue, as well as reflecting the desires of current leadership. In this regulatory climate, it’s increasingly important for emission unit operators to understand enforcement risks and liabilities. ...

  • Innovative Dryer and Emission Control System at a Particleboard Installation

    In 1989, Bohemia Corporation installed a new primary drying system and also air pollution control equipment at their particleboard plant in Eugene, Oregon. The drying system was composed of a Westec America triple-pass rotary drum dryer fired by a Coen sanderdust burner. The primary and secondary particulate collectors installed were also of a Westec America design. The tertiary air pollution ...


    By Lundberg, LLC

  • Silicone converter succeeds with custom air pollution control equipment - Case study

    Many industries utilize silicone as an ingredient in their manufactured product. Silicone enhances the attributes of the product or helps to improve production characteristics. Whatever the reason may be, users of solvent borne silicone's all face very troubling issues when it comes to the selection of the right air pollution control system. Among the air pollution control choices available to ...

  • Controlling Hazardous Air Emissions With A Catalytic Oxidizer

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment. With well over twenty years of proven success, catalytic oxidation is a popular method for controlling volatile organic compound (VOC) emissions.During the past 25 years, industry has made progress in ...


    By The CMM Group, LLC

  • Repair, retrofit, and rebuild services for amine treating acid gas process - Case Study

    Catalytic Products International (CPI) was recently engaged by a Western Colorado Gas Processing Facility to review the existing amine treating acid gas process and the air pollution control equipment installed in an effort to help optimize the units and make improvements to the reliability of the entire system. Introduction: Identify root cause of numerous failures and create an ...

  • Achieving Air Pollution Control With Catalytic Or Thermal Oxidizers

    As the full effect of the Federal Clean Air Act (CAA) Amendments passed by Congress in 1990 continue to impact today's industry, many manufacturing operations have become subject to stricter local, State and Federal clean air regulations. Both VOC (volatile organic compound) and HAP (hazardous air pollutant) emissions are strictly regulated since they lead to the formation of ground level ozone ...


    By The CMM Group, LLC

  • Case study - Converter finds affordable compliance solution

    Overview It’s not just about increasing production for Fredman Bag’s president, Tim Fredman Jr., it’s also about being a environmentally conscious neighbor. A converter’s decision to expand their capacity is often made more complicated by a corresponding need to invest in air pollution control equipment. Recent expansions had Fredman Bag making major investments in ...

  • What`s the Best Air Pollution Control Technology for My Process?

    Air pollution control equipment is not something that business owners address by saying, “Let’s do the right thing for the environment and install an oxidizer!” In fact, the scenario is more likely to be “We need to increase productivity (always a good thing!), but that will put us over our annual emissions limits. Do we know what we will need? Where do we start? Who can ...

  • Catalytic Oxidizers

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many different companies will be required to install air pollution control equipment. With more than twenty-five years of proven success, catalytic oxidation continues to be a popular method for controlling volatile organic compound (VOC) emissions. According to the Clean Air Act, any organic ...


    By The CMM Group, LLC

  • Ethanol Plant Modifications Result in Capacity Increase

    Operating Issue When the production capacity of a Midwest ethanol plant was limited to 80% by their existing air pollution control equipment, Pollution System Solutions was sought to utilize their industry knowledge and resources to identify the underlying issue and resolve it. Project Solution After carefully considering the Thermal Recuperative ...


    By Pollution Systems

  • Achieving Air Pollution Control with Catalytic or Thermal Oxidizers

    As the full effect of 1990’s Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many manufacturing operations have become subject to stricter local, state and federal clean air regulations. Both VOC (volatile organic compound) and HAP (hazardous air pollutant) emissions are strictly regulated since they lead to the formation of ground-level ozone (or smog). The CAA ...


    By The CMM Group, LLC

  • Filter technology to meet evolving regulations

    Maguin has developed the Cercat filter for high temperature air pollution control. In this article, David Gambier and Hélène Real outline the technology, as well as installations planned for 2009. Maguin has been present in the waste thermal treatment field since the 1970s. The company’s knowledge has been built through the turnkey supply of thermal treatment units for different kinds of products ...

  • A Comprehensive Review Of Regenerative Thermal Oxidizers

    Within industry today, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new. In response to Congressional guidelines passed in the 1970’s, a number of companies with VOC emissions have been operating air pollution control systems of one type or another for 25 years or more. These guidelines have been revised and added to as the years progressed, making it ...


    By The CMM Group, LLC

  • Medical implant manufacturer succeeds with the QUADRANT SRS Silicone Series Thermal OXidizer - Case study

    Medical Implant Manufacturer Succeeds with Customized Air Pollution Control Equipment Many industries utilize silicone as an ingredient in their manufactured product. Silicone enhances the attributes of the product or helps to improve production characteristics. Whatever the reason may be, users of solvent borne silicone's all face very troubling issues when it comes to the selection of the right ...

  • High-temperature air pollution control technology

    Based on 35 years’ experience working for the environment, French company Maguin has developed the Cercat filter for high temperature air pollution control. David Gambier describes the technology and its potential use in the glassmaking industry.Maguin has been present in the waste thermal treatment field since the 1970s, offering customers innovative and state-of-the-art concepts. The company’s ...

  • The twin cities sludge-to-energy plant reduces greenhouse gas emissions

    ABSTRACTThe majority of Utilities and Agencies in the United States (U.S.) that incinerate sludge treat this practice as a disposal method and do not maximize the recovery of energy available in the sludge and hence, do not contribute to the reduction in greenhouse gas (GHG) emissions.  The Metropolitan Council Environmental Services (MCES) have used incineration at the Metro Wastewater ...

  • Ex Situ Thermal Treatment for Soil, Sediment, and Sludge

    The main advantage of ex situ treatments is that they generally require shorter time periods, and there is more certainty about the uniformity of treatment because of the ability to screen, homogenize, and continuously mix the soils. Ex situ processes, however, require excavation of soils leading to increased costs and engineering for equipment, possible permitting, and materials handling worker ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you