air pollution control industry Articles

Experimental investigation into performance characteristics of reversed flow cyclone separators

Cyclone separators have been extensively used both for particle sampling and particle removal from fluids, air or process gases in the field of air pollution control and in industry. In this experimental study, effects of inlet velocity, inlet shape and cyclone length on the cyclone collection efficiency and pressure losses were investigated. A new cyclone design without conical part and its ...

May 27, 2014

By Inderscience Publishers

Energy & Environmental Technology- Solid - Liquid Separation Technology

Tajhiz Sanaat Baran's mission is to be the provider in the Environmental & Energy Solutions. Our purpose in Energy fields is directed to the engineering consultants and offering update technologies in consumption optimizing and energy saving of Buildings and Factories. In the Environmental fields, we offer High-Tech solutions and make equipment in Water Treatment, Industrial and Sanitary ...

Mar. 25, 2013

By TSB Co.

Regeneration Game

As the first generation of oxidizer systems in the industry nears the end of their service life, many canmaking plants face repair or replacment of their existing air pollution control systems.Like many others in the industry, a Silgan canmaking plant in the midwest had been using a thermal recuperativveoxidizer with direct heat recovery for control of emissions from its sheet coating lines. ...

May 14, 2008

By Anguil Environmental Systems, Inc.

Tri-Mer Corporation is a leader in air pollution control, with more than 6,000 installed APC systems worldwide

Tri-Mer is also the leader in equipment for removing PM, SO2, and NOx from large-scale stationary diesel operations. Tri-Mer’s UltraCat Catalytic Filter system is the world’s premier dry technology for PM+ SO2+ NOx. Tri-Mer technology treats diesel emissions from a wide variety of stationary sources. These include generators, small power plants, and “mixed fuel” steam ...

Jun. 1, 2019

By Tri-Mer Air Pollution Control Systems

Air Pollution Control in the Flexographic Printing Industry

A basic review of technologies used, and selection criteria to consider, to successfully control the VOC/HAP emissions exhausted from flexographic printing presses. Within the flexographic printing industry, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new. Today, because of business expansion, modifications to plant operations, or changes in ...

Apr. 1, 2003

By The CMM Group

Stationary diesel applications - Case study

Tri-Mer Corporation is a leader in air pollution control, with more than 6,000 installed APC systems worldwide. Tri-Mer is also the leader in equipment for removing PM, SO2, and NOx from large-scale stationary diesel operations. Tri-Mer’s UltraCat Catalytic Filter system is the world’s premier dry technology for PM+ SO2+ NOx. Tri-Mer technology treats diesel emissions from a wide ...

Jun. 4, 2019

By Tri-Mer Air Pollution Control Systems

Air pollution control for the fertilizer industry in the Middle East - Case Study

Through our subsidiary company, APC Process Engineering, ERG has an impressive track record in the Middle East Fertilizer Production Industry. All our systems come with a performance guarantee backed by more than 30 years of experience successfully treating industrial air pollution around the world. ERG’s systems are used for treating silica, phosphate rock and scale dust, ammonia, ...

Sep. 21, 2010

By ERG (Air Pollution Control) Ltd

Air Pollution Control Using Catalytic, Regenerative or Recuperative Systems

For companies in a variety of industries, the clock is ticking regarding their compliance with local, state and federal clean air requirements. The need to provide adequate emission controls still looms on the horizon as these companies explore the various equipment and technology options available to them. While the guidelines regarding air pollution control are consistent by industry, a ...

Feb. 1, 2002

By The CMM Group

Super Burn-Off Oven Case Study

Pollution Control Products Co. has completed construction of one of the largest industrial cleaning ovens in the world. Destined to service the oilfields of the Middle East, this huge furnace will make its permanent base in the oil-rich country of Oman located on the southwest coast of the Arabian Peninsula at the entrance to the Persian Gulf. Because of its mammoth size, the oven had to be built ...

Jan. 23, 2019

By Pollution Control Products Co.

Update and revision of Turkish air quality regulation

The Air Quality Assurance Regulation (AQAR) was issued on October 1986. This regulation was basically a direct translation of the German TA-Luft of 1984. The main purpose of AQAR was to control the effect of industry, domestic heating and Traffic on ambient air quality which previously had not adequately been represented. Two new regulations, "Industry Related Air Pollution Control Regulation" ...

Sep. 24, 2009

By Inderscience Publishers

`Strategy for Complying with Air Pollution Control Regulations in the Chemical Industry,` published in Environmental Protection, October 2001

The Clean Air Act (CAA) was originally passed by the United States Congress in 1970 and subsequently revised in 1977 for the purpose of protecting human health and the environment. In 1990, then-President George Bush signed the Clean Air Act Amendments. The far-reaching impacts of the 1990 amendments added significantly to the regulatory challenges already faced by the chemical industry. The ...

Jun. 28, 2001

By Trinity Consultants

Controlling particulate emissions

Cloud chamber technology uses electrically charged water droplets to attract fine particles and remove them from exhaust streams. At the Saint-Gobain Advanced Ceramics Boron Nitride (formerly Carborundum) plant in Amherst, N.Y., the technology has exceeded required performance criteria and helped a plant with an air pollution control problem remain a part of the local industrial ...

Jan. 1, 2007

By Tri-Mer Air Pollution Control Systems

Ever-changing regulations and guidelines inhibit production and reduce profits

Operators of chemical processing facilities are always under scrutiny from environmental protection regulatory agencies. Overlapping and frequently confusing regulations that affect the industry are enforced on federal, state, and local levels. To make life even more difficult for the chemical plant operator, volatile organic compound (VOC) and hazardous air pollutants (HAP) control standards ...

Aug. 1, 2010

By Catalytic Products International (CPI)

Fiber Optics Manufacturing

Fiber Optics Glass. Applications where conventional equipment is very inconsistent in meeting regulations provides an opportunity for the Cloud Chamber Scrubber (CCS) to showcase its unique capabilities. Fiber optics manufacturing is a typical example. After a pilot plant demonstration, the first CCS units in fiber optics manufacturing were installed in Europe in early 2000. The CCS was ...

Mar. 26, 2007

By Tri-Mer Air Pollution Control Systems

Air pollution control helps India improve air quality

Nowadays people in India suffer the most from numerous diseases caused by air pollution in the world. Air pollution is considered to be the main contributor to climate change, that is why it provokes a growing concern not only in India but around the world. The thing is that there is one of the highest disease burdens from air pollution in the world. To be more precise, about 100 percent of ...

Nov. 12, 2019

By Optromix, Inc.

Textile Industry: Air Pollution Control Through Wet Scrubbers, High Energy Venturi Scrubbers, Packed Bed Scrubbers and Other Technologies - Case Study

Wet Scrubbers, High Energy Venturi Scrubbers, Packed Bed Scrubbers are an excellent solution for air pollution in the textile industry. The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well into the 21st ...

Feb. 16, 2016

By CR Clean Air Group

Medical implant manufacturer succeeds with the QUADRANT SRS Silicone Series Thermal OXidizer - Case study

Medical Implant Manufacturer Succeeds with Customized Air Pollution Control Equipment Many industries utilize silicone as an ingredient in their manufactured product. Silicone enhances the attributes of the product or helps to improve production characteristics. Whatever the reason may be, users of solvent borne silicone's all face very troubling issues when it comes to the selection of the ...

Jun. 9, 2011

By Catalytic Products International (CPI)

Dixie Cut Stone & Marble chooses Whirl Wet High Efficiency Wet Dust Collector with Low Maintenance and Operating Costs.

Dixie Cut Stone & Marble finishes Indiana limestone for the dimensional stone industry. Dixie management wanted 'best available' dust control technology to maximize both ergonomic and housekeeping benefits. Tri-Mer supplied two Whirl/Wet units with top-mounted blowers. Collected material is discharged manually after settling. The system operates with minimal water consumption and consumes ...

Mar. 26, 2007

By Tri-Mer Air Pollution Control Systems

Air pollution regulations drive deployment of flexible abatement solutions - Case Study

To address the growing complexity of air pollution regulations, which have to address a multi-tiered array of local authority, national and international requirements, AirProtekt of Cambridge is offering a total package air pollution service that embraces process assessment, project design, supply of the air pollution equipment, installation and commissioning. Modern Air pollution regulations ...

May 10, 2017

By AirProtekt Limited

Case study - Standardization: a breath of fresh air for Anguil Environmental Systems

OEM reduces engineering costs by 50 percent through standardizing on the Rockwell Automation® Logix control BACKGROUND According to the United States Environmental Protection Agency (EPA), each year millions of tons of air toxins are released into the air, mostly from man-made sources. Anguil Environmental Systems Inc., a Milwaukee-based air pollution control system provider, has been ...

Jan. 1, 2007

By Anguil Environmental Systems, Inc.